Abstract:Membrane-based processes feature many advantages for surface water treatment over other technologies; however, the trade-off between membrane selectivity and permeability usually results in the failure to obtain high-quality filtrate at a high permeance. In this study, we report a highly permeable sodium alginate/glutaraldehyde cross-linked carbon nanotube (CNT/SA-GA) membrane with high adsorption ability for surface water treatment. The CNT/SA-GA membranes have a well-formed hollow fiber morphology and good conductivity of 166-261 S/m. They could reject >98 % of large-sized molecules (e.g., Alcian Blue 8GX and Congo Red) at high permeances of 137-227 L/(m(2).h.bar). Moreover, they could remove similar to 100 % of smaller molecules (e.g., Rhodamine B (RhB)) through dynamic adsorption with a capacity of similar to 57.3 mg/g. Benefiting from their good conductivity, the CNT/SA-GA membranes could easily decompose the pollutants after adsorption saturation through electrochemical oxidation and then regenerated themselves. Though the switch between adsorption and electrochemical oxidation (2.0 V), the CNT/SA-GA membranes could remove similar to 100 % RhB at a high permeance of 342 L/(m(2).h.bar), which is one order of magnitude higher than those of nanofiltration membranes. When used for surface water treatment, the CNT/SA-GA membranes exhibited a much higher TOC removal rate than commercial poly(acrylonitrile) (PAN) membranes (56.2 % vs. 7.2 %). LC-MS/MS analysis showed that many small molecules such as caffeine could be effectively removed by the CNT/SA-GA membranes. In addition, they exhibited a higher fouling resistance than PAN membranes, evidenced by their lower permeance decline ratio (10.1 % vs. 43.7 %). This study will promote the development and applications of the CNT-based membranes for water purification.

Reconstructing Electrically Conductive Nanofiltration Membranes with an Aniline-Functionalized Carbon Nanotubes Interlayer for Highly Effective Toxic Organic Treatment

Robust and Highly Efficient Free‐Standing Carbonaceous Nanofiber Membranes for Water Purification

Conductive CNT/nanofiber Composite Hollow Fiber Membranes with Electrospun Support Layer for Water Purification

Conductive nanofiltration membranes via in situ PEDOT-polymerization for electro-assisted membrane fouling mitigation

Enhanced Permeability, Contaminants Removal and Antifouling Ability of CNTs-based Hollow Fiber Membranes under Electrochemical Assistance

Carbon Nanotube Hollow Fiber Membranes: High-throughput Fabrication, Structural Control and Electrochemically Improved Selectivity

Constructing all carbon nanotube hollow fiber membranes with improved performance in separation and antifouling for water treatment.

Carbon-nanotube-based Sandwich-Like Hollow Fiber Membranes for Expanded Microcystin-Lr Removal Applications

Highly permeable carbon nanotubes/polyamide layered membranes for molecular sieving

Highly Permeable Positively Charged Nanofiltration Membranes with Multilayer Structures for Multiple Heavy Metal Removals

Flexible Superhydrophobic Metal-based Carbon Nanotube Membrane for Electrochemically Enhanced Water Treatment.

High-performance Nanofiltration Membranes with a Sandwiched Layer and a Surface Layer for Desalination and Environmental Pollutant Removal.

Enhanced Permeability, Selectivity, and Antifouling Ability of CNTs/Al2O3 Membrane under Electrochemical Assistance

In-Situ Modification of Nanofiltration Membranes Using Carbon Nanotubes for Water Treatment

Mineralized Nanofiber Substrates Enabling High-Performance Dually Charged Nanofiltration Membranes with Enhanced Permeability

CNTs Intercalated LDH Composite Membrane for Water Purification with High Permeance

Electrified carbon nanotube membrane technology for water treatment

Metal In Situ Surface Functionalization Of Polymer-Grafted-Carbon Nanotube Composite Membranes For Fast Efficient Nanofiltration

Highly Permeable Carbon Nanotube Membranes for Efficient Surface Water Treatment Through Separation and Adsorption–electrochemical Regeneration

High Flux Nanofiltration Membranes with Double-Walled Carbon Nanotube (DWCNT) As the Interlayer

Cross-Linked G-C3n4 Nanofibers Enable Thermal Stable Composite Membranes for High-Performance Loose Nanofiltration