Abstract:Metal alloy microstructure plays a crucial role in corrosion associated with total hip replacement (THR). THR is a prominent strategy that uses metal implants such as cobalt-chromium-molybdenum (CoCrMo) alloys due to their advantageous biological and mechanical properties. Despite all benefits, these implants undergo corrosion and wear processes in-vivo in a synergistic manner called tribocorrosion. Also, the implant retrieval findings reported that fretting corrosion occurred in-vivo , evidenced by the damage patterns that appeared on the THR junction interfaces. There is no scientific data on the studies reporting the fretting corrosion patterns of CoCrMo microstructures in the presence of specific biological treatments to date. In the current study, Flat-on-flat fretting corrosion set-up was customized and used to study the tribocorrosion patterns of fretting corrosion to understand the role of alloy microstructure. Alloy microstructural differences were created with the implant stock metal's longitudinal and transverse cutting orientations. As a result, the transverse created the non-banded, homogenous microstructure, whereas the longitudinal cut resulted in the banded, non-homogenous microstructure on the surface of the alloy (in this manuscript, the terms homogenous and banded were used). The induced currents were monitored using a three-electrode system. Three different types of electrolytes were utilized to study the fretting corrosion patterns with both homogeneous and banded microstructures: 1. Control media 2. Spent media (the macrophage cell cultured media) 3. Challenged media (media collected after the macrophage was treated with CoCrMo particles). From the electrochemical results, in the potentiostat conditions, the banded group exhibited a higher induced current in both challenged and spent electrolyte environments than in control due to the synergistic activity of CoCrMo particles and macrophage demonstrating more corrosion loss. Additionally, both Bode and Nyquist plots reported a clear difference between the banded and homogeneous microstructure, especially with challenged electrolytes becoming more corrosion-resistant post-fretting than pre-fretting results. The banded microstructure showed a unique shape of the fretting loop, which may be due to tribochemical reactions. Therefore, from the electrochemical, mechanical, and surface analysis data results, the transverse/homogenous/non-banded alloy microstructure groups show a higher resistance to fretting-corrosion damage.

Enhanced corrosion resistance of CoCrMo by laser-based surface modification

Microstructure enhanced biocompatibility in laser additively manufactured CoCrMo biomedical alloy

Influence of Proteins and Building Direction on the Corrosion and Tribocorrosion of CoCrMo Fabricated by Laser Powder Bed Fusion

Improving biotribological properties and corrosion resistance of CoCrMo alloy via a Cr-GLC nanocomposite film in simulated body fluids

Process optimization and electrochemical behavior of CoCrMo alloy fabricated by selective laser meltingbased on response surface method

Investigation of cell-accelerated corrosion (CAC) on the CoCrMo alloy with segregation banding: Hip implant applications

Polydopamine-Assisted Immobilization Of Chitosan Brushes On A Textured Cocrmo Alloy To Improve Its Tribology And Biocompatibility

Tribocorrosion Behavior of Dlc-Coated Cocrmo Alloy in Simulated Biological Environment

A novel nanosecond pulsed laser textured moat configurations for enhancing surface wettability, corrosion and tribology behaviour of Ti6Al4V implant material

Effect of ion beam etching on the tribological performance of laser textured Co-Cr-Mo alloy

Response of MC3T3-E1 osteoblast cells to the microenvironment produced on Co–Cr–Mo alloy using laser surface texturing

Atomic Surface of Cobalt-Chromium-molybdenum Alloy Induced by Novel Green Chemical Mechanical Polishing Through Controlling Ph Values and Oxidation Processes

Synchronous Improvement of Wear and Corrosion Resistance of CoCrNiMoCB Coatings&nbsp;Obtained by Laser Cladding: Role of Mo Concentration

Morphology and Properties of CoCrMo Parts Fabricated by Selective Laser Melting

Surface modification of biomedical Mg-Ca and Mg-Zn-Ca alloys using selective laser melting: Corrosion behaviour, microhardness and biocompatibility

Fabricating hierarchical micro and nano structures on implantable Co-Cr-Mo alloy for tissue engineering by one-step laser ablation

Effects of thermal treatments on microstructure and mechanical properties of a Co-Cr-Mo-W biomedical alloy produced by laser sintering

Surface integrity modification of CoCrMo alloy by deep rolling in combination with sub-zero cooling as potential implant application

In vitro biocompatibility of CoCrMo dental alloys fabricated by selective laser melting

Nanoscale Surface Refinement of CoCrMo Alloy for Artificial Knee Joints via Chemical Mechanical Polishing

Scratch and Wear Behaviour of Co-Cr-Mo Alloy in Ringer's Lactate Solution