Abstract:Background: Titanium plasma spray coating on polyetheretherketone (PEEK) is a recent innovation to interbody spacer technology. The inherent hydrophobic properties of standard, uncoated PEEK implants can hamper cell attachment and bone healing during fusion. The addition of titanium coating not only offers initial stability due to increased surface roughness but also long-term stability due to bony ongrowth created from osteoconductive microenvironment on the device surface. The previously established hydrophilic and osteophilic properties of commercially pure titanium (CPTi) can potentially provide an ideal environment promoting cell attachment and bony ongrowth when applied at the end plate level of the fusion site. Because the surface material composition and topography is what seems to directly affect cell adhesion, it is important to determine the ideal titanium coating for the highest effectiveness. Purpose: The purpose of the study is to determine whether there is an optimal surface roughness for the titanium coatings and whether different polishing methods have a greater effect than roughness or topography in mediating cell adhesion to the surface. Study design/setting: The study was divided into two phases. In Phase 1, the effects of varying surface roughnesses on identical polishing method were compared. In Phase 2, the effect of varying polishing methods was compared on identical surface roughnesses. Methods: Coating thickness, porosity, and surface roughness were characterized using an optical microscope as per ASTM F 1854 standards. For both phases, PEEK coupons with plasma-sprayed CPTi were used, and human mesenchymal stem cells (hMSCs) at an initial density of 25,000 cells/cm2 were seeded and cultured for 24 hours before fixation in 10% formalin. The cultured hMSCs were visualized by 4',6-diamidino-2-phenylindole (DAPI) staining, a fluorescent stain that binds to the DNA of living cells. Samples were imaged using an environmental scanning electron microscope (eSEM) (Carl Zeiss Microscopy, Thornwood, NY, USA) using a backscattered detector. Results: Image analysis of the CPTi coatings showed uniform and rough surfaces. For Phase 1, roughness was evaluated as fine, medium, and coarse. The eSEM image analysis and cell counting by DAPI demonstrated that hMSCs have a tendency to form stronger adhesion and greater pseudopodia extensions on fine roughness surfaces. Individual hMSCs were seen forming cytoplasmic processes extending across the width of a pore. There was a 4- and 20-fold reduction in adhered hMSCs with an increase to medium and coarse roughnesses, respectively. For Phase 2, studied groups are (1) medium CPTi coating with zirconia polishing, (2) medium CPTi coating with CPTi polishing, and (3) fine CPTi coating with CPTi polishing. The eSEM image analysis and cell counting by DAPI demonstrated that hMSCs have a tendency to form stronger adhesion and greater pseudopodia extensions on Group 3 over the other two groups. There was a twofold reduction in adhered hMSCs on medium roughness relative to fine. No difference in cell adhesion was found between Groups 1 and 2. Individual hMSCs were seen forming cytoplasmic processes extending across the width of a pore. Conclusions: Previously, it was accepted without much scrutiny that surface coatings were beneficial. This study begins to discover that surface topography directly affects the potential for cells to adhere and proliferate and lead to greater surgical efficacy.

Mesenchymal stem cell response to topographically modified CoCrMo

Effects of Nacre-Coated Titanium Surfaces on Cell Proliferation and Osteocalcin Expression in Mg-63 Osteoblast-Like Cells

Osteogenesis of Rat Mesenchymal Stem Cells and Osteoblastic Cells on Strontium-Doped Nanohydroxyapatite-Coated Titanium Surfaces.

Response of MC3T3-E1 osteoblast cells to the microenvironment produced on Co–Cr–Mo alloy using laser surface texturing

Morphology, proliferation, and osteogenic differentiation of mesenchymal stem cells cultured on titanium, tantalum, and chromium surfaces

Surface functionalization of nanoporous alumina with bone morphogenetic protein 2 for inducing osteogenic differentiation of mesenchymal stem cells.

Surface Modification And Its Effect On Attachment, Spreading, And Proliferation Of Human Gingival Fibroblasts

Nanostructured Molybdenum Disulfide Biointerface for Adhesion and Osteogenic Differentiation of Mesenchymal Stem Cells

Bone-Mimetic Osteon Microtopographies on Poly-ε-Caprolactone Enhance the Osteogenic Potential of Human Mesenchymal Stem Cells

Optimizing surface characteristics for cell adhesion and proliferation on titanium plasma spray coatings on polyetheretherketone

Effects of the micro-nano surface topography of titanium alloy on the biological responses of osteoblast

Effects of the Hierarchical Macro/mesoporous Structure on the Osteoblast-Like Cell Response

Microstructure enhanced biocompatibility in laser additively manufactured CoCrMo biomedical alloy

Controlling osteoblast morphology and proliferation via surface micro-topographies of implant biomaterials

MC3T3-E1 cell response to stainless steel 316L with different surface treatments

Enhanced corrosion resistance of CoCrMo by laser-based surface modification

Effect of Surface Chemical Modification of Bioceramic on Phenotype of Human Bone-Derived Cells

Histone Modification of Osteogenesis Related Genes Triggered by Substrate Topography Promotes Human Mesenchymal Stem Cell Differentiation

Human mesenchymal stem cell behavior on femtosecond laser-textured Ti-6Al-4V surfaces

Biological Responses of Human Bone Mesenchymal Stem Cells to Ti and TiZr Implant Materials

Chemical etching of Ti‐6Al‐4V biomaterials fabricated by selective laser melting enhances mesenchymal stromal cell mineralization