Abstract:Many preventive measures showed improved performance of concrete against alkali-silica reaction (ASR) based on the concrete prism test (CPT) described in the Canadian and American Standards, CSA A23.2-14A and ASTM C1293. However, research has shown that preventive measures that limited the 2-year expansion in the concrete prism test produced late expansion after 7-15 years when tested in the field. The objective of this research is to understand the possible reasons for this late expansion under field conditions and to come up with modified approach to determine the level of supplementary cementing materials (SCM) needed to mitigate the long-term expansion. The research mainly focuses on studying two possible reasons to explain the late expansion. The first reason is the rate and ultimate hydration of SCM, where their capacity to bind alkalis under CPT could be higher than those under field conditions. The other reason for the late expansion could be the geometry and size of the CPT samples which might reduce the expansion due to the excessive alkali leaching. Larger samples showed less leaching compared to standard prisms. 100-mm cylinders showed higher expansion than 75-mm standard prisms; however, both sample shapes showed similar expansions for one tested aggregate when used with SCM. In addition, the capacity of SCM to bind alkalis was shown to be higher at 38oC compared to the other two tested temperatures investigated in this study: 23oC and 60oC. Samples with SCM at high replacement levels expanded more at 60oC compared to 38oC. Due to their reduced leaching compared to prisms, testing cylinders at 60oC showed accelerated results reducing the testing duration to one year compared to the standard test duration of two years. Moreover, a new way to predict the minimum levels of SCM required to mitigate expansion due to alkali-silica reaction is presented showing better correlation with the field. Finally, a fast and reliable test method is suggested to evaluate the reactivity of mineral fillers by adapting and adopting the current test methods available for ASR testing.

Performance of Concrete Containing a Variety of Black Shale: Discussion

Comparison of Field Observations with Laboratory Test Results on Concretes Undergoing Alkali-Silica Reaction

Performance of Silane -Based Surface Treatments for Protecting Degraded Historic Concrete

Experimental investigation on the effect of coarse aggregate size and silica fume dosage to the fracture parameters of concrete

DURABILITY OF CONCRETE, ALKALI-AGGREGATE REACTION

A study of the ASR of an aggregate with high chert content by means of ultra-accelerated mortar bar test and pore fluid analysis

UNDERSTANDING THE FACTORS AFFECTING EXPANSION DUE TO ALKALI-SILICA REACTION IN CONCRETE

Study on the Durability of High-Content Oil Shale Concrete

Failure criteria and microstructure evolution mechanism of the alkali–silica reaction of concrete

Performance of high slag concretes in the context of alkali-silica reaction

Divergence between Performance in the Field and Laboratory Test Results for Alkali-Silica Reaction

Development of Enhanced Test Methods to Evaluate Alkalisilica Reaction in Concrete

Geological evaluation of black shale as a suitable Supplementary Cementitious Material (SCM) to optimize the use of clinker in cement production

EFFECTIVENESS OF MINERAL ADMIXTURES IN PREVENTING EXCESSIVE EXPANSION OF CONCRETE DUE TO ALKALI-AGGREGATE REACTION. IN: INVESTIGATING CONCRETE. SELECTED WORKS OF BRYANT AND KATHARINE MATHER

A study into the effects of test variables on the results of concrete tests for salt scaling and alkali-silica reaction

Deleterious expansion of concrete due to alkali-silica reaction: influence of pfa and slag

Micro-structure and Macro-performance: Surface Layer Evolution of Concrete under Long-term Exposure in Harsh Plateau Climate

Long-term Performance of Structural Concretes in China Southeast Coastal Environments Exposed to Atmosphere and Chlorides

Assessment of Alkali–Silica Reaction Potential in Aggregates from Iran and Australia Using Thin-Section Petrography and Expansion Testing

Effect of rock mineralogy on mortar expansion

Sulfate Resistance and Alkali-Silica Reaction of Recycled Aggregate Concrete