Abstract:Nanomaterial combined polymeric membranes such as polyurethane foams (PUFs) have garnered enormous attention in the field of water purification due to their ease of management and surface modification, cost-effectiveness, and mechanical, chemical, and thermal properties. Thus, this study reports the use of novel Sol-gel impregnated polyurethane foams (Sol-gel/PUFs) as new dispersive solid phase microextractors (d- μ SPME) for the efficient separation and subsequent spectrophotometric detection of Eosin Y (EY) textile dye in an aqueous solution with a pH of 3–3.8. The Sol gel, PUFs, and Sol gel–impregnated PUFs were characterized using scanning electron microscopy (SEM), goniometry measurements, dynamic light scattering (DLS), energy dispersive spectroscopy (EDS), UV-Visible, and FTIR spectra. Batch experiment results displayed a remarkable removal percentage (96% ± 5.4%) of the EY from the aqueous solution, with the total sorption time not exceeding 60 min. These data indicate rate-limited sorption via diffusion and/or surface complex ion associate formations after the rapid initial sorption steps. A pseudo-second order kinetic model thoroughly explained the sorption kinetics, providing a sorption capacity (q e ) of 37.64 mg g −1 , a half-life time (t 1/2 ) of 0.8 ± 0.01 min, and intrinsic penetration control dye retention. The thermodynamic results revealed a negative value for ΔG 0 (−78.07 kJ mol −1 at 293 K), clearly signifying that the dye uptake was spontaneous, as well as a negative value for ΔH 0 (−69.58 kJ mol −1 ) and a positive value for ΔS 0 (147.65 J mol −1 K −1 ), making clear the exothermic nature of EY adsorption onto the sorbent, with a growth in randomness at the molecular level. A ternary retention mechanism is proposed, involving the "weak base anion exchanger" of {(–CH 2 –OH + –CH 2 –) (Dye anion) − } Sol-gel / PUF and/or {(–NH 2 + –COO-) (Dye anion) − } Sol-gel / PUF via solvent extraction and "surface adsorption" of the dye anion on/in the Sol-gel/PUFs membranes in addition to H-bonding, including surface complexation and electrostatic π-π interaction, between the dye and the silicon/zirconium oxide (Si-O-Zr) and siloxane (Si-O-Si) groups on the sorbent. Complete extraction and recovery (93.65 ± 0.2, −102.28 ± 2.01) of EY dye with NaOH (0.5 M) as a proper eluting agent was achieved using a sorbent-packed mini column. In addition, the established extractor displayed excellent reusability and does not require organic solvents for EY enrichment in water samples, making it a talented nominee as a novel sorbent for EY sorption from wastewater. This study is of great consequence for expanding the applicatio1n of Sol-gel/PUFs in developing innovative spectrophotometric sensing strategies for dye determination. In view of this, it would also be remarkable to perform future studies to explore the analytical implications of this extractor regarding safety and environmental and public health issues associated to the pollutant.

Dipyrromethanes grafting on a poly (vinyl alcohol) nanofibrous mat as naked-eye sensor/receptor for detection and removal of ionic pollutants from water

Collectable and Recyclable Mussel-Inspired Poly(Ionic Liquid)-Based Sorbents for Ultrafast Water Treatment

Tailoring the Selectivity of Quasi-Pims Nanofiltration Membrane Via Molecular Flexibility of Acyl Chloride Monomers for Desalination from Dye Effluents

Electrospun polymeric nanohybrids with outstanding pollutants adsorption and electroactivity for water treatment and sensing devices

Electrospun Nanofiber Membranes from 1,8-Naphthimide-Based Polymer/Poly(vinyl alcohol) for pH Fluorescence Sensing

A Molecularly Imprinted Polymer on a Plasmonic Plastic Optical Fiber to Detect Perfluorinated Compounds in Water

Efficient antibiotic removal from water using europium-doped poly(vinyl alcohol) nanofiber mats esterified with citric acid

Highly Efficient Biosorption of Cationic Dyes via Biopolymeric Adsorbent-Material-Based Pectin Extract Polysaccharide and Carrageenan Grafted to Cellulosic Nonwoven Textile

Regulating water decontamination and food safety by a reusable, nanosized MOF@cotton@chitosan composite through nanomolar detection of drug nitroxinil and organoarsenic feed additive p-arsanilic acid

Surface functionalization of a chalcogenide IR photonic sensor by means of a polymer membrane for water pollution remediation

Ionic‐liquid Grafted Poly(vinylidene Fluoride) with Ph Responsiveness Using As Water Treatment Separation Membranes for Multi‐dye Retention and Adsorption

Polydopamine Microsphere-Incorporated Electrospun Fibers as Novel Adsorbents for Dual-Responsive Adsorption of Methylene Blue.

Innovative Sol-gel functionalized polyurethane foam for sustainable water purification and analytical advances

Evaluation, optimization study, and life cycle assessment of novel eco-friendly PVA-based nanocomposite hydrogel adsorbents for methylene blue and paracetamol removal

Novel Discrete and Imprinted Fluoride‐Selective Sensors: Bridging the Gap from DMSO to Aqueous Samples

PPY: PVA Blend Enhanced with Metal Salt for Gas Sensing Applications

A novel Pd decorated polydopamine-SiO2/PVA electrospun nanofiber membrane for highly efficient degradation of organic dyes and removal of organic chemicals and oils

A Polyvinylpyrrolidone Nanofibrous Sensor Doubly Decorated with Mesoporous Graphene to Selectively Detect Acetic Acid Vapors

Supramolecular imprinted cellulose-based N-doped biomass carbon fiber for visual detection and specific degradation of perfluorooctanoic acid

Molecularly imprinted MOFs-driven carbon nanofiber for sensitive electrochemical detection and targeted electro-Fenton degradation of perfluorooctanoic acid

Polydopamine-functionalized electrospun poly(vinyl alcohol)/chitosan nanofibers for the removal and determination of Cu(II)