Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

Application of the Electrodiffusion Method to Measure Wall Shear Stress: Integrating Theory and Practice

On the inverse problem for two-component unsteady wall shear rate measurements: Application to the electrodiffusion method

Theory for electrodiffusional wall shear stress measurement by directionally sensitive twin semicircular probe

RESEARCH ON DIFFUSION IN MICRO-CHANNEL FLOW DRIVEN BY ELECTROOSMOSIS

Electrokinetics In Micro-Channeled Cantilevers: Extending The Toolbox For Reversible Colloidal Probes And Afm-Based Nanofluidics

Absolute Measurement System for Low Electrolytic Conductivity of Aqueous Solutions Based on Van Der Pauw'S Theory Using A Flow-Through Cell

Two-component instantaneous wall shear rate measurements in reversing flows

Uncovering wall-shear stress dynamics from neural-network enhanced fluid flow measurements

Study On Characteristics Of Interface Between Multiple Laminar Streams And Application For Secondary Etching Inside Microchannels

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

Wall shear stress measurement using a zero-displacement floating-element balance

System for absolute measurement of electrolytic conductivity in aqueous solutions based on van der Pauw's theory

Methodology of the electrochemical hydrogen permeation test: A parametric evaluation

On the method of determining instantaneous wall shear stress from near-wall velocity measurements in wall turbulence

A deep learning approach to wall-shear stress quantification: From numerical training to zero-shot experimental application

Electro-Osmotic Flow and Mass Transfer through a Rough Microchannel with a Modulated Charged Surface

Implementation and validation of a generalized wall stress function

A Hydraulic Gradient and Stress-Controlled Erosion Apparatus for Assessing Soil Internal Erosion

A Theoretical Framework for the Electrochemical Characterization of Anisotropic Micro-Emulsions

A Method to Measure the Diffusion Coefficient in Liquids

MEMS-based pressure and shear stress sensors for turbulent flows