Abstract:As an important component of the system, the performance of the printed circuit heat exchanger (PCHE) has a significant impact on the efficiency and compactness of the supercritical carbon dioxide (SCO 2 ) Brayton cycle system. Optimization of the structural parameters of airfoil fins can improve the performance of PCHE flow channels, but it has not received enough attention. Therefore, it is of great significance to investigate the effects of structural parameters such as the maximum thickness (W f ), the distance from the position where the maximum thickness is located to the leading-edge (D f ), and the radius of the leading-edge (R f ) of the airfoil fins on the flow heat transfer performance of SCO 2 in the channel of PCHE. A three-dimensional numerical model is developed and validated for performance analysis of the PCHE, meanwhile the thermal-hydraulic performance of channels with different structural parameters of the airfoil fins is compared. The results show that with the increase of the W f of the airfoil fins, the heat transfer characteristics of the PCHE channel are gradually enhanced, and the flow characteristics are gradually weakened. When the maximum thickness of the airfoil fins is in the front, the heat transfer and flow characteristics of the PCHE channel are better. As the R f of the airfoil fins increases, the heat transfer characteristics and flow characteristics of the PCHE channel fluctuate. The change of the turbulent kinetic energy, the boundary layer thickness, the synergistic effect of the velocity field and the temperature gradient field, and the local entropy production in the channel can well explain the mechanism of the flow and heat transfer of the SCO 2 in the airfoil fin channel. In addition, among the channels with different structural parameters of the airfoil fins, the Fin-5 airfoil fin channel with W f of 1.5 mm, the Fin-6 airfoil fin channel with D f of 0.6 mm and the Fin-13 airfoil fin channel with R f of 1.46 mm are recommended. Their comprehensive performance is 2.0–6.3%, 0.9–5.6% and 0.13–1.81% higher than that of the Fin-3 airfoil fin channel, respectively.

Research on the enhanced heat transfer performance of SCO 2 caused by vortex generators with different geometric dimensions in novel airfoil channels

Investigation of local flow and heat transfer of supercritical LNG in airfoil channels with different vortex generators using field synergy principle

Analysis on flow and heat transfer performance of SCO2 in airfoil channels with different fin angles of attack

Investigation of the thermal-hydraulic characteristics of SCO 2 in a modified hybrid airfoil channel

Thermo-hydraulic Characteristics of Offset Strip Fin Heat Exchanger with Vortex Generators

Analysis on the flow and heat transfer performance of SCO 2 in airfoil channels with different structural parameters

Thermal performance augmentation of microchannel using curved rectangular winglet vortex generators having rectangular perforation

Entropy generation and thermal behavior of microchannel fitted with punched curved vortex generators

Optimal Configuration of Vortex Generator for Heat Transfer Enhancement in a Plate-Fin Channel

Performance optimization of a wavy finned-tube heat exchanger with staggered curved vortex generators

Numerical investigation of thermo-hydraulic performance of perforated rectangular and sinusoidal vortex generators in a double-pipe heat exchanger

Performance study on a printed circuit heat exchanger composed of novel airfoil fins for supercritical CO2 cycle cooling system

Investigation of heat transfer performance and enhancement mechanisms of supercritical carbon dioxide in PCHE with fractal airfoil fins

Parametric Study of Vortex Generator Effects in an Additive Manufactured Minichannel Heat Exchanger

Thermohydraulic characteristics of water–cooling oil heat exchanger with vortex generators and its enhanced heat transfer mechanism

Enhancing Plate-Fin Heat Exchanger Hydraulic Thermal Performance Through Air-Side Fin Optimization Based on Pseudo-3D Topology Optimization

Effects of Rectangular Wing Vortex Generators on the Thermal-Hydraulic Performance of Louvered Fin and Flat Tube Heat Exchanger

Multi-objective Optimization of Heat Transfer Performance of H-type Fin with Vortex Generator Based on NSGA-II

Three-dimensional numerical study on fin-and-oval-tube heat exchanger with longitudinal vortex generators

Numerical Study And Optimization Of Corrugation Height And Angle Of Attack Of Vortex Generator In The Wavy Fin-And-Tube Heat Exchanger

Optimal Position of Rectangular Vortex Generator for Heat Transfer Enhancement in a Flat-Plate Channel