Abstract:Distribution characteristics of the current, ampere force and magnetic flux density (B [T]) of a novel high temperature superconducting (HTS) cable woven by transposed REBCO tapes under different transposition lengths are proposed, and these characteristics of the cable stacked with 3 REBCO tapes are also carried out in this paper for comparison. The objective is to enhance the current density and the compactness of the HTS tapes combination, and uniform the current, ampere force and magnetic flux density (B [T]) distributions. A 3D finite element model (FEM), based on Maxwell's equations without consideration of the displacement current, is established to describe the state of the system in the liquid nitrogen condition. The distributions characteristics, maximum and minimum values of current, ampere force and magnetic flux density (B [T]) show significant differences in the simulation results between the novel HTS cable woven by 3 transposed REBCO tapes and the cable stacked with 3 REBCO tapes. The simulated results show that the distribution characteristics are improved, with a more uniform distribution characteristic than that of the cable stacked with REBCO tapes. This is due to fully transposed REBCO tapes. In addition, the experimental E-I curve was also reached. The experimental results show that using a shorter transposition length in the cable can improve the critical current. However, A too small transposition length can cause significant damage to the HTS tape, resulting in deformation of the HTS tape and a reduction in the electromagnetic properties of the HTS tape. This affects the critical current of the HTS tape and, ultimately, the critical current of the cable. From the point of view of whether the production process is convenient, meets the requirements of economy and reduces costs, we need to find a suitable transposition length. The measured optimal transposition length is 95 mm for the cable woven by 3 REBCO tapes. Ethical Compliance: All procedures performed in studies involving human participants were in accordance with the ethical standards of the institutional and/or national research committee and with the 1964 Helsinki Declaration and its later amendments or comparable ethical standards.

Current-Sharing Behaviour of Single-Phase HTS Transformers With Stacked-Tape Cables

Design of Compact Transmission Line Transformer for High Voltage Nanosecond Pulses

An Optimize Design of HTS Transformer:Multi-Width and Multi-Distance Structure

An Experimental Investigation of Critical Current and Current Distribution Behavior of Parallel Placed HTS Tapes

AC losses in HTS sector shaped high-current conductors for fusion coils

Analysis of Current Distributions in HTS Tapes of Superconducting Bipolar DC Energy Pipeline

Numerical Analysis on the Current Distribution and the Loss in HTS Stacked Tapes Considering Termination Resistances

Analytical Formulae for Hysteresis Power Loss in Twisted Stacked HTS Cables

Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Research on the Hydraulic Transformer with New Distribution Pairs

Current Characteristics of Stacked HTS Conductors With Gap Optimization: Experiment and Modeling

Critical current characteristics and ampere force distribution of a novel HTS cable with different transposition lengths

High Temperature Superconducting Transformer Operating at an Increased Frequency of Alternating Current

Experimental Study on AC Loss of 1G and 2G HTS Coils with an Identical Structure, Geometry and Number of Turns

Electromechanical Analysis of HTS Cage Rotors for Induction-Synchronous Machines

Report On Progress Towards a 10 kA Transformer-Rectifier Flux Pump

Simulation of Current Profile and AC Loss of HTS Winding Wound by Parallel-Connected Tapes

Calculation of AC losses in stacks and coils made of second generation high temperature superconducting tapes for large scale applications

Theoretical and experimental study of AC loss in HTS single pancake coils

Thermal degradation analysis and optimization of controlled heat treatment for stacked high temperature superconducting tapes