Ultrafast deposition of faceted lithium polyhedra by outpacing SEI formation

Xintong Yuan,Bo Liu,Matthew Mecklenburg,Yuzhang Li

DOI: https://doi.org/10.1038/s41586-023-06235-w

IF: 64.8

2023-08-03

Nature

Abstract:Electrodeposition of lithium (Li) metal is critical for high-energy batteries 1 . However, the simultaneous formation of a surface corrosion film termed the solid electrolyte interphase (SEI) 2 complicates the deposition process, which underpins our poor understanding of Li metal electrodeposition. Here we decouple these two intertwined processes by outpacing SEI formation at ultrafast deposition current densities 3 while also avoiding mass transport limitations. By using cryogenic electron microscopy 4,5,6,7 , we discover the intrinsic deposition morphology of metallic Li to be that of a rhombic dodecahedron, which is surprisingly independent of electrolyte chemistry or current collector substrate. In a coin cell architecture, these rhombic dodecahedra exhibit near point-contact connectivity with the current collector, which can accelerate inactive Li formation 8 . We propose a pulse-current protocol that overcomes this failure mode by leveraging Li rhombic dodecahedra as nucleation seeds, enabling the subsequent growth of dense Li that improves battery performance compared with a baseline. While Li deposition and SEI formation have always been tightly linked in past studies, our experimental approach enables new opportunities to fundamentally understand these processes decoupled from each other and bring about new insights to engineer better batteries.

multidisciplinary sciences

What problem does this paper attempt to address?

This paper mainly explores the influence of solid electrolyte interface (SEI) formation on the morphology control during lithium metal electrodeposition. Lithium metal electrodes are crucial in high-energy batteries, but the synchronous formation of SEI complicates the deposition process, leading to a lack of understanding of lithium metal electrodeposition. Researchers successfully separated lithium deposition from SEI growth by using ultra-fast deposition current density (greater than SEI formation rate) and the geometry of ultra-microelectrodes (UME).

Under these conditions, they observed a transition of the lithium metal deposition morphology from various irregular shapes to regular dodecahedra, matching the theoretical prediction of face-centered cubic crystal Wulff construction without the influence of SEI. This dodecahedral morphology is independent of electrolyte chemistry and current collector substrates, and can overcome the problem of inactive lithium formation caused by poor connection with the substrate through pulse current protocols, thereby improving battery performance.

Furthermore, the paper also demonstrates that in different electrolytes, even at high current density, the morphology of lithium transforms into the same dodecahedral shape, indicating a decoupling of lithium deposition and SEI formation under these conditions, with the weakened influence of electrolyte chemistry. Through electrochemical analysis, the researchers prove that under ultra-fast current density, the transport rate of lithium ions from the liquid electrolyte to the lithium surface is the same as that without SEI interference, while SEI hinders the transport of lithium ions under normal current density.

Finally, despite the decrease in Coulombic efficiency (CE) of lithium at a current density of 50mA/cm² due to poor contact with the substrate, resulting in the formation of a large amount of inactive lithium, the researchers propose a pulse charging strategy that utilizes lithium dodecahedra as nucleation seeds, improving the reversibility of lithium deposition and stripping and thus enhancing battery performance.

In conclusion, this paper reveals that controllable and SEI-free deposition of lithium metal can be achieved by controlling the current density and utilizing ultra-microelectrodes, providing new insights for understanding and designing better batteries.