Abstract:Semiconductor photodetectors can work only in specific material-dependent light wavelength ranges, connected with the bandgaps and absorption capabilities of the utilized semiconductors. This limitation has driven the development of hybrid devices that exceed the capabilities of individual materials. In this study, for the first time, a hybrid heterojunction photodetector based on methylammonium lead bromide (MAPbBr3) polycrystalline film deposited on gallium arsenide (GaAs) was presented, along with comprehensive morphological, structural, optical, and photoelectrical investigations. The MAPbBr3/GaAs heterojunction photodetector exhibited wide spectral responsivity, from 540 to 900 nm. The fabrication steps of the prototype device, including a new preparation recipe for the MAPbBr3 solution and spinning, will be disclosed and discussed. It will be shown that extending the soaking time and refining the precursor solution's stoichiometry may enhance surface coverage, adhesion to the GaAs, and film uniformity, as well as provide a new way to integrate MAPbBr3 on GaAs. Compared to the pristine MAPbBr3, the enhanced structural purity of the perovskite on GaAs was confirmed by X-ray Diffraction (XRD) upon optimization compared to the conventional glass substrate. Scanning Electron Microscopy (SEM) revealed the formation of microcube-like structures on the top of an otherwise continuous MAPbBr3 polycrystalline film, with increased grain size and reduced grain boundary effects pointed by Energy-Dispersive Spectroscopy (EDS) and cathodoluminescence (CL). Enhanced absorption was demonstrated in the visible range and broadened photoluminescence (PL) emission at room temperature, with traces of reduction in the orthorhombic tilting revealed by temperature-dependent PL. A reduced average carrier lifetime was reduced to 13.8 ns, revealed by time-resolved PL (TRPL). The dark current was typically around 8.8 × 10-8 A. Broad photoresponsivity between 540 and 875 nm reached a maximum of 3 mA/W and 16 mA/W, corresponding to a detectivity of 6 × 1010 and 1 × 1011 Jones at -1 V and 50 V, respectively. In case of on/off measurements, the rise and fall times were 0.40 s and 0.61 s or 0.62 s and 0.89 s for illumination, with 500 nm or 875 nm photons, respectively. A long-term stability test at room temperature in air confirmed the optical and structural stability of the proposed hybrid structure. This work provides insights into the physical mechanisms of new hybrid junctions for high-performance photodetectors.

MAPbBr3-nXn (X=Cl, I) Single Crystal Narrowband Photodetectors for Potential Application in Traffic Light Recognition

High-performance CsPbBr3-xClx/Si Heterojunction Photodetectors for Variable Wavelength Photodetection

Self‐Driven Narrow‐Band Photodetector based on FAPbBr2.5I0.5 Single Crystal for Yellow Light Intensity Meter Application

Filter-free color image sensor based on CsPbBr 3−3n X 3n (X = Cl, I) single crystals

Narrowband Near‐Infrared Photodetector Enabled by Dual Functional Internal‐Filter‐Induced Selective Charge Collection

Tuning Photodetection Band of MAPbX3(X=Cl/Br/I) Perovskite Single Crystals by Sub-nano Carbon Dot Doping

Self-filtering narrowband perovskite photodetector with ultra-narrowband and high spectral rejection ratio

Chalcogenide‐Based Narrowband Photodetectors for Imaging and Light Communication

Sensitive Filter‐Free Narrowband Infrared Photodetectors for Weak Light Detection and Ranging

Solution‐Processed, Self‐Powered Broadband CH 3 NH 3 PbI 3 Photodetectors Driven by Asymmetric Electrodes

Physical Properties of an Efficient MAPbBr3/GaAs Hybrid Heterostructure for Visible/Near-Infrared Detectors

Narrowband and Broadband Dual‐Mode Perovskite Photodetector for RGB Detection Application

Solution-processed MAPbI 3 /Cs 2 AgBiBr 6 heterostructure through epitaxial growth for broadband photo-detection

Si/Organic Integrated Narrowband Near-Infrared Photodetector

A Narrowband Perovskite Photodetector for Blue Light Hazard Detection

Hybrid Polyrhizal CdS Nanobelts/All‐Inorganic Perovskite Nanoflake Heterojunction toward Ultrahigh‐Performance Optoelectronic Devices

Working Voltage Switching the Photo-/Thermo-Electric Effect for Distinct Ultraviolet and Infrared Signal Detection

High‐stability Organic Red‐light Photodetector for Narrowband Applications

Fabrication and characterization of the red photodetector based on CsPbI3/n-Si heterojunction

High-Performance Planar Self-Driven Visible and Near-Infrared Photodetector Based on Pb-Sn Perovskite Single Crystals

Photo-Diodes Based on CH3NH3PbCl3 Perovskite Single Crystals by Epitaxial Growth for Ultraviolet Photo-Detection