Abstract:Background and objectives: Laser surgical procedures involving photocoagulation of soft tissue have relied on subjective visual endpoints. The thermal damage to the denatured tissue in these procedures is highly dependent on the tissue temperatures achieved during laser irradiation. Therefore, a system capable of real time temperature monitoring and closed loop feedback was used to provide temperature controlled photocoagulation (TCPC). Study design/materials and methods: The TCPC system consisted of a 1.32 microns Nd:YAG laser, an infrared thermometer, and a microprocessor for data acquisition and feedback control. A porcine skin model was used. Tissue welds were completed to evaluate the photocoagulation effects at different predetermined temperatures. A quantitative measurement of tissue photocoagulation was obtained by tensile strength measurements of the laser repairs. Histology of the irradiated tissue was used to determine the extent of thermal injury associated with different photocoagulation temperatures. Results: The TCPC system was capable of maintaining a relatively constant temperatures (+/- 4 degrees C) during laser irradiation. The tensile strengths of acute repairs increased with temperature over the range studied (65-95 degrees C). Tensile measurements made after several days of healing showed that higher temperature (95 degrees C) welds had lower strengths than repairs completed at lower (65 degrees C or 75 degrees C) temperatures and were significantly lower at 3 days. Acute histology showed that the amount thermal damage was strongly dependent on the tissue temperature and increased both in tissue depth and lateral to the repair with temperature. The histologic results suggest that the increase in the acute repair tensile strength as the weld temperature increased was due to an increase in the depth of tissue photocoagulation. The increase in the lateral tissue injury measured histologically for higher temperature welds likely resulted in the decreased chronic tensile strengths, as a healing response to excessive thermal damage. Conclusion: Tissue temperatures can be controlled during laser photocoagulation of skin. The degree of acute and chronic tissue damage is highly dependent on the temperature during welding. By controlling the tissue temperature during laser procedures, the surgical outcome can be more reliably predicted and reproduced, as compared to the conventional open loop methods. In addition, the use of a TCPC system should significantly reduce the learning curve for photothermal surgical procedures.

Finite element simulation and experimental validation of thermal damage to isolated porcine skin tissue by femtosecond laser welding

Effect of femtosecond laser process parameters on the thermal denaturation degree of skin tissue

Experimental study on the effect of scanning path on skin tissue properties of femtosecond laser welding

Laser-tissue interaction simulation considering skin-specific data to predict photothermal damage lesions during laser irradiation

Optimization of Processing Parameters of Laser Skin Welding in Vitro Combining the Response Surface Methodology with NSGA- II

Biomechanical properties and modeling of skin with laser influence

Temperature-controlled laser photocoagulation of soft tissue: in vivo evaluation using a tissue welding model

Numerical Simulation and Experimental Study on Thermal Damage in Invitro Human Skin-tissue by High-Intensity Laser

Temperature Distribution of Vessel Tissue by High Frequency Electric Welding with Combination Optical Measure and Simulation

Numerical simulation of heat transfer properties of skin tissue acted on repetitive laser irradiation

Porcine skin damage thresholds and histological damage characteristics from 1319-nm laser radiation

Parametric investigation of multi-pulsed cryogen spray cooling for skin protection during hyperthermal laser lipolysis through in vitro experiment and numerical simulation

Effect of Scanning Modes on the Tensile Strength and Stability in Laser Skin Welding in Vitro

Experimental Study and Analysis on Biomechanical Properties of Skin with Laser Influence

ICONE19-43939 Phenomenological Evaluation of Laser-Irradiated Welding Processes with a Combined Use of Higher-Accuracy Experiments and Computational Science Methodologies : (5) Numerical Simulation of the Welding Processes with a Multi-Dimensional Multi-Physics Analysis Code SPLICE

Research on the Effect of Process Parameters on the Performance of Femtosecond Laser-Bonded Skin Microstructure

Investigation of collagen reconstruction mechanism in skin wound through dual-beam laser welding: Insights from multi-spectroscopy, molecular dynamics simulation, and finite element multiphysics simulation

Amendments of weld formation in human skin laser soldering

Numerical Simulation of the Optical-Thermal Interaction in Vivo Layered Skin-tissue by Laser

Study on mechanism underlying effect of scanning paths on healing performances in dual-beam laser welding

Porcine Skin Ablation Using Mid-Infrared Picosecond Pulse Burst