Abstract:Printed circuit heat exchanger has become a new choice for the recuperators and intermediate heat exchangers of supercritical carbon dioxide nuclear power system due to its advanced power density and ability to operate under high temperature and high pressure conditions. The flow mal-distribution among the channels of PCHE significantly affects its heat transfer efficiency. This study focuses on the prediction and optimization of flow mal-distribution in the PCHE. A simulation framework of manifolds-flow channel system which consists of virtual channels that connecting the upstream and downstream manifolds is established to analyze the variations of flow characteristics in the PCHE as geometric parameters change. The study indicates that with channel array dimension, channel length and inlet header diameter increase, the flow distribution improves, but the flow resistance increases. When the channel array dimension is 7, within the range of design variables, as the flow non-uniformity decreases from 0.314 to 0.021, the total pressure drop increases from 1256.9Pa to 6950.3Pa. Then, a prediction scheme for the flow mal-distribution in the PCHE based on dimensionless number analysis and machine learning methods is established, resulting in a neural network response surface that reflects flow characteristics and velocity distribution consisting of 162 design points. Finally, to reduce flow mal-distribution in the heat exchanger design process, the response surface model is used to generate flow characteristics for each design point, and the combination of NSGA-II and TOPSIS method is applied to get pareto front and sequence the performance of each design point, leading to a heat exchanger subcomponent design scheme. Compared to the design point on the Pareto front with the maximum flow non-uniformity, the application of TOPSIS method enables the PCHE to reduce flow non-uniformity by 93.39 %, while the pressure drop only increases by 32.67 %.

Design optimization of heat exchanger using deep reinforcement learning

Combining Reinforcement Learning with Mathematical Programming: an Approach for Optimal Design of Heat Exchanger Networks

Intelligent optimization method for real-time decision-making in laminated cooling configurations through reinforcement learning

Design Optimization of Nuclear Fusion Reactor through Deep Reinforcement Learning

Enhancing Plate-Fin Heat Exchanger Hydraulic Thermal Performance Through Air-Side Fin Optimization Based on Pseudo-3D Topology Optimization

Study on the prediction and optimization of flow mal-distribution in printed circuit heat exchangers based on machine learning

Potential of 3D Printing for Heat Exchanger Heat Transfer Optimization—Sustainability Perspective

Computational Discovery of Energy-Efficient Heat Treatment for Microstructure Design using Deep Reinforcement Learning

Multi-objective optimization research of printed circuit heat exchanger based on RSM and NSGA-II

"Deep Reinforcement Learning for Engineering Design Through Topology Optimization of Elementally Discretized Design Domains"

Optimization of airfoil fin PCHE for the power conversion system of lead-based reactor based on reinforcement learning

A Novel Optimization Framework for Designing Multi-Stream Compact Heat Exchangers and Associated Network

Multi-objective optimization of thermal power and outlet steam temperature for a nuclear steam supply system with deep reinforcement learning

Highly Productive 3D Printing Process to Transcend Intractability in Materials and Geometries via Interactive Machine‐Learning‐Based Technique

Designing an Effective Plate Fin Heat Exchanger and Prediction of Thermal Performance Operated Under Different Water Blends Using Machine Learning

Deep-learning accelerating topology optimization of three-dimensional coolant channels for flow and heat transfer in a proton exchange membrane fuel cell

Research on Optimization of 3D Printing Model Based on Deep Learning

Optimization of 3D printed liquid cooled heat sink designs using a micro-genetic algorithm with bit array representation

A Framework for Multi-Objective Optimization of Plate-Fin Heat Exchangers Using a Detailed Three-Dimensional Simulation Model

Non-iterative Structural Topology Optimization Using Deep Learning

Weight and Performance Optimization of Rectangular Staggered Fins Heat Exchangers for Miniaturized Hydraulic Power Units Using Genetic Algorithm