Abstract:Ice-strengthened ships inevitably suffer from ice floe impacts during navigation in icy regions. Under some extreme-ice-impact loadings, the ship structure will experience plastic deformations. The magnitude of plastic deformation is highly correlated with the ice floe-impact energy level. During most ice impacts, only the ship's plate undergoes minor plastic deformation. Considering that the structure still has a high structural strength with a minor permanent deformation, developing a structural plastic design method for polar ships has become a hot research issue in current studies. Therefore, in this paper, based on the rigid-plastic theory and the ice-crushing-energy approach, an experimentally verified theoretical model for predicting plastic deformations of the vertical-side plate of polar ship subjected to ice floe impacts was established. According to the analytical solutions of the plastic deformation, the plastic design formula to determine the plating thickness of ice-strengthened ships subjected to ice floe impacts was further derived based on the plastic design criteria. In addition, the parameter analysis of ice strength described by the ice pressure–area relationship, allowable-permanent-set parameter, impact energy and ice shape were conducted, and plating-thickness design curves with different design parameters were given. The design of plating thickness is very sensitive to the determinations of the allowable-permanent set and ice pressure–area curves. The designed plating thickness decreased with the increase of the allowable-permanent set. Moreover, a comparative analysis of the designed plating thickness for ice floe impact and rigid-mass impact was also carried out. Under the same impact conditions, due to energy absorption caused by ice damage, the designed thickness of the plate for rigid-mass impact was much larger than that for the ice impact. It is necessary to consider the impact-induced ice damage and energy dissipation in a structural design, instead of using rigid impact loads for conservative design. The research in this paper can provide some useful references for the structural design of ice-strengthened ships subject to ice floe impacts.

Experimental study on the dynamic behaviour of aluminium honeycomb sandwich panel subjected to ice wedge impact

Dynamic mechanical behaviour and energy absorption of aluminium honeycomb sandwich panels under repeated impact loads

On the Surface Deformation Measurement and Energy Absorption of a Honeycomb Panel Subjected to Low-Velocity Impact

Experimental and analytical study on impact response of stainless steel-aluminium foam-alloy steel sandwich panels

Investigations of ice impact damage and residual performance of 3D angle-interlock woven composites based on in-situ sampling

Experimental and numerical studies on corrosion-resistant aluminium foam sandwich panel subject to low-velocity impact

Response of Aluminium Honeycomb Sandwich Panels under Combined Shock and Impact Loading: Experimental and Numerical Investigations

Deformation and Failure of Asymmetric Sandwich Structures under Low-Velocity Impact

Study on Low-velocity Impact Resistance of Aluminum Sandwich Honeycomb Panel

Dynamic behavior of aluminum honeycomb sandwich panels under air blast: Experiment and numerical analysis

Mechanical properties and energy absorption capabilities of aluminium foam sandwich structure subjected to low-velocity impact

Study on the Dynamic Crushing Behaviors of Hourglass Honeycomb Sandwich Panels

A New Plastic Design Approach for the Vertical-Side-Plating Thickness of Ice-Strengthened Ships Suffering from Ice Floe Impacts

Behaviors of Steel–concrete-Steel Sandwich Panel with Aluminum Foam-Filled Energy Absorbing Supports under Low-Velocity Impact

On low-velocity impact response of foam-core sandwich panels

Dynamic Response of Sandwich Plates with GLARE Face-Sheets and Honeycomb Core under Metal Foam Projectile Impact: Experimental and Numerical Investigations

An experimental study of the dynamic responses of carbon fiber reinforced polymer composite laminates subjected to ice impact

Impact Responses of Steel–concrete–steel Sandwich Panels with Interlocked Angle Connectors: Experimental and Numerical Studies

Damage Resistance of Honeycomb Sandwich Composites under Low-Energy Impact

Internal-structure-model based simulation research of shielding properties of honeycomb sandwich panel subjected to high-velocity impact

Structural impact damage of metal honeycomb sandwich plates