Abstract:Auxetic double arrowhead honeycombs (DAHs) featured by negative Poisson's ratio is attracting increasing attention owing to their tailorable mechanical properties and outstanding energy absorption capability. In this paper, the two-dimensional metallic DAHs were produced and used as the sandwich cores to construct the large-size double arrowhead honeycomb sandwich panels (DAHSPs). A comprehensive experimental investigation on their dynamic responses under the paper tube-guided air blasts was conducted. It majorly focused on the influence of core configurations induced by the variation of core wall thickness, horizontal distance, inclined angles, thickness allocations and foam filling on the deformation/failure modes, associated mechanisms and blast resistance of the target panels. Fair comparisons among different design strategies were performed to evaluate their relative performance. Experimental results show that relative to increasing the core wall thickness, the decrease of horizontal distance is more remarkable to reduce the back face deflection upon the similar weight expense, whereas the effect of inclined angles is limited due to the competition between enhanced bending stiffness and deteriorated transmitted load. A more efficient approach to decrease the back face deformation is to enlarge the inclined angles when the core relative density is relatively low but to decrease the horizontal distance at a high level of relative density. A further improvement of blast resistance can be achieved by allocating more mass to the stuffer wall rather than the tendon one, or by introducing a gradient DAH core instead of the homogeneous one. Compared to adjusting the metallic DAH core itself, the lightweight polyurethane (PU) foam filling is a more competitive manner to promote the blast performance. The preliminary numerical simulations confirmed the shock focusing effect of the paper tube support and indicated reasonable agreement with the experimental results. The present study is supposed to shed light on the design, manufacturing and optimization of auxetic sandwich structures for protection applications.

Dynamic behavior of aluminum honeycomb sandwich panels under air blast: Experiment and numerical analysis

Experimental and numerical investigation on the anti-penetration performance of metallic sandwich plates for marine applications

Response of aluminium corrugated sandwich panels under air blast loadings: Experiment and numerical simulation

Mechanical Response of Metallic Honeycomb Sandwich Panel Structures to High-Intensity Dynamic Loading

Numerical Simulation of Blast-resistant Performance of Aluminum Foam Sandwich Structures and Optimization

Paper tube-guided blast response of sandwich panels with auxetic re-entrant and regular hexagonal honeycomb cores – An experimental study

Dynamic mechanical behaviour and energy absorption of aluminium honeycomb sandwich panels under repeated impact loads

Experimental and numerical study of square sandwich panels with layered-gradient foam cores to air-blast loading

Dynamic Responses Of Ultralight All-Metallic Honeycomb Sandwich Panels Under Fully Confined Blast Loading

High-velocity impact performance of sandwich panels with additively manufactured hierarchical honeycomb cores: An experimental and numerical study

Blast Resistance of Metallic Sandwich Panels Subjected to Proximity Underwater Explosion

Experimental study on failure mechanisms of sandwich panels with multi-layered aluminum foam/UHMWPE laminate core under combined blast and fragments loading

Blast Response of Aluminum Foam Sandwich Panel with Double V-shaped Face Plate

On the Surface Deformation Measurement and Energy Absorption of a Honeycomb Panel Subjected to Low-Velocity Impact

Blast resistance of metallic double arrowhead honeycomb sandwich panels with different core configurations under the paper tube-guided air blast loading

The Impulsive Response of Aluminium Foam Core Sandwich Structures

Performance of Metallic Honeycomb-Core Sandwich Beams under Shock Loading

Study on the dynamic response of combined honeycomb structure under blast loading

Dynamic Behaviors of Sandwich Panels with 3D-Printed Gradient Auxetic Cores Subjected to Blast Load

Research on Dynamic Response under the External Impact of Paper Honeycomb Sandwich Board

Experimental and Numerical Study on Dynamic Response of Foam-Nickel Sandwich Panels under Near-Field Blast Loading