Abstract:Light-frame buildings commonly employ shear wall realized by framing and sheathing panels made of wood materials. Recently, much research has focused on the use of engineered bamboo composites to substitute wood in light-frame buildings. The aim of this study is to investigate the thermal insulation performances of bamboo- and wood-based shear walls in light-frame buildings. First, an archetype wall with characteristics similar to those commonly employed in wood shear walls was defined. Starting from the archetype wall, four specific configurations representing one classical full wood-based configuration, one hybrid bamboo-wood-based configuration and two full bamboo-based configurations with different studs thickness were identified to be tested. The thermal conductivity of the materials composing the wall was measured using a hot plate apparatus varying the temperature in the range of 10-50 degrees C. The anisotropy of the thermal conductivity was analyzed for the wood and bamboo materials. The four specific configurations of the archetype wall were tested in a guarded hot box apparatus in order to determine the thermal resistance and transmittance. The experimental results were compared with the estimates obtained using the ISO 6946 procedure and a Finite Element (FE) model of the wall, both adopting the thermal conductivity previously measured. A good agreement between the experiments and the models was found with the better results obtained with the FE model. Finally, the so-validated FE model was used to optimize the archetype wall with only bamboo-based materials to the Chinese thermal regions, showing the possibility of real application in the practice. All the results indicate that the thermal insulation performances of engineered bamboo composites are slightly lower compared with wood ones, both at the material and the shear wall levels. This indicates that there is the possibility of using bamboo-based shear walls in light-frame buildings ensuring thermal insulation performances similar to classical wood-based one. (C) 2018 Elsevier B.V. All rights reserved.

Thermal and acoustic insulation properties of wood plastic composites (WPCs) for interior housing applications

New Thermal Insulation Materials from Waste of Mechanical Processing of Wood

Thermal Insulation Performance of Bamboo- and Wood-Based Shear Walls in Light-Frame Buildings

Evaluation of self-thermally treated wood plastic composites from wood bark and rapeseed oil-based binder

Development of Wood Polymer Composites from Recycled Wood and Plastic Waste: Thermal and Mechanical Properties

Physicomechanical and Thermal Properties of Particle Board Produced Using Waste Ceramic Materials and Corncob

Wood plastic composites based wood wall's structure and thermal insulation performance

Evaluation of Thermal and Acoustic Properties of Oil Palm Empty Fruit Bunch/Sugarcane Bagasse Fibres Based Hybrid Composites for Wall Buildings Thermal Insulation

Characterization of wood fiber insulation for the development of wood fiber-insulated panels (WIPs) for use in building envelope

Lightweight, bacteriostatic and thermally conductive wood plastic composite prepared by chitosan modified biointerfaces

Valorisation of Waste Carton Paper, Melon Seed Husks, and Groundnut Shells to Thermal Insulation Panels for Structural Applications

Eco-Sustainable Wood Waste Panels for Building Applications: Influence of Different Species and Assembling Techniques on Thermal, Acoustic, and Environmental Performance

Development and Characterization of Environmentally Friendly Wood Plastic Composites from Biobased Polyethylene and Short Natural Fibers Processed by Injection Moulding

Thermoplastic moulding of wood-polymer composites (WPC): a review and research proposal on thermo-physical and geometric design options using hot-pressing

Valorization of Potential Post-Consumer Polyethylene (PE) Plastics Waste and Ethiopian Indigenous Highland Bamboo (EHB) for Wood Plastic Composite (WPC): Experimental Evaluation and Characterization

Wood-fiber insulation boards (WFIB) produced with hardwood and softwoods species and polylactic acid (PLA) fibers as a binder

Thermal Properties of Wood-Plastic Composites with Different Compositions

New Eco-Friendly Thermal Insulation and Sound Absorption Composite Materials Derived from Waste Black Tea Bags and Date Palm Tree Surface Fibers

Preparation and mechanism of lightweight wood fiber/poly(lactic acid) composites

Processing of Waste Biomass: Production of Composite Thermal Insulation Panels from Empty Fruit Bunch and Spent Mushroom Substrates

Investigation of various hardwood and softwood fibres for the usage in wood-fibre insulation panels