Abstract:Inherent defect of easy oxidation limited further application of carbon fiber/phenolic resin composites in hostile environments. Herein, a combined strategy of matrix modification and fiber coating was proposed to fabricate a novel ceramizable composite containing Al-coated carbon fibers and Ti3SiC2 toward thermal protection materials (TPM), which offered a promising solution to challenge facing long-term thermal protection and load-bearing subject to severe oxidation corrosion and ablation in hypersonic vehicle applications. Oxidation resistance, mechanical strength evolution, phase evolution, microstructure evolution and mechanical strength failure mechanism at elevated temperatures were studied based on thermogravimetric analysis, static ablation test, mechanical test, X-ray diffraction analysis, and scanning electron microscopy coupled with energy dispersive X-ray analysis. The resulting composites exhibited outstanding oxidation resistance, with residue yield at 1600 °C and flexural strength at 1400 °C as high as 87.7% and 31.7 MPa, respectively. It was found that dense multiphase ceramics formed by reactions between Ti3SiC2, O2, pyrolytic carbon (PyC) and N2, acted as oxygen barriers and self-healing agents during static ablation. Besides, the resulting composites exhibited satisfactory ablation resistance and the linear ablation rate was as low as 0.00853 mm/s. Furthermore, ablation mechanisms were revealed based on phase identification, microstructure characterization and thermodynamic calculation analysis. It was revealed that multiphase ceramics composed of PyC, Al coatings, Ti3SiC2, TiC, Al2OC and AlB2 contributed great to the ablation resistance during oxyacetylene ablation.

Ablation resistance of Ti2AlC ceramics at 1600 °C in nitrogen plasma flame

Ablation behavior of high-entropy carbides ceramics (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C upon exposition to an oxyacetylene torch at 2000 °C

Ablation mechanism of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C-SiC composite during plasma ablation above 2000 °C

Ablation behavior and mechanisms of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C–SiC high-entropy ceramic matrix composites

Ablation resistance of SiC-modified nanocomposite ceramic coating prepared by LPDS method on titanium alloy

The AblationPerformance of Silicon Nitride/Boron Nitride Fibrous Monolithic Ceramics under an Oxyacetylene Combustion Torch

Nanostructured Al2O3–TiO2 Coatings for High-Temperature Protection of Titanium Alloy During Ablation

The Ablation Performance of Silicon Nitride/Boron Nitride Fibrous Monolithic Ceramics under an Oxyacetylene Combustion Torch

Ablation behavior of (TiZrHfNbTa)C high-entropy ceramics with the addition of SiC secondary under an oxyacetylene flame

Ablation Mechanism of AlSiB-C/C Composites under an Oxy-Acetylene Torch

Oxyacetylene ablation of (Hf0.2Ti0.2Zr0.2Ta0.2Nb0.2)C at 1350 − 2050 °C

Microstructure and Ablation Behavior of TiAl Alloy with In-Situ HfSi2-HfO2-SiO2 Nanocomposite Ceramic Coating by LPDS Technique

Ablation resistance of ZrB2–SiC–AlN ceramic composites

Study on the Behavior in Thermal Shock and Ablation Resistance of TiC-TiB2/Cu Ceramic-Matrix Composite

Ablation behavior of C f /ZrC–SiC ultra–high temperature ceramic composites in oxyacetylene torch and plasma wind tunnel

Novel refractory high-entropy ceramics: Transition metal carbonitrides with superior ablation resistance

Ablation of Tungsten Matrix Composites Reinforced by TiC and ZrC Particles

Oxidation resistance, ablation resistance and in situ ceramization mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composites modified with Ti3SiC2

High Temperature Oxidation Behavior of Ti_3AlC_2 Ceramics Prepared by SHS/PHIP

Laser Ablation Behavior of Al0.2crnbtiv Refractory High-Entropy Alloy Coating Deposited by High Speed Laser Cladding

Enhanced ablation resistance of HfB2-HfC/SiBCN ceramics under an oxyacetylene torch environment