Abstract:The rheological properties of tailings from gold, copper, and iron ore have been studied in this paper, using a self-developed large-scale type coaxial cylinder rheometer. The effect factors of the rheological properties of tailings, namely mineral types, particle size, plasma concentration, and the shear rate, and the influence they have on the viscosity and yield stress have also been studied. The test results showed that the viscosity of the tailings initially decreased with time and then became stable, while the yield stress initially increased with time and then tended to become stable. Three types of tailings all had a similar change trend with only small differences in value. The differences resulted from the varying mineral constituents of the tailings. The viscosity and the yield stress of the tailings increased as the concentration increased. As the shear rate decreased, the viscosity increased, but the yield stress also decreased. The change in magnitude of the yield stress increased as the concentration increased. It was also found that a larger particle size resulted in a higher viscosity and yield stress, the rise of which became more obvious at higher concentrations. The results were fitted using the exponential function of the Bingham model, and it was found that the coefficients of A1 and A2 changed significantly with the concentration, which indicated that A1 and A2 were largely influenced by other factors, and not only by the plasma concentration and particle diameter decisions. However, these functions of the Bingham model and the other coefficients of B1 and B2 were nearly constant. The three types of tailings also had a similar change trend for the fitted coefficients. There were some differences between the values associated with the type of tailings. For the same kind of tailings, the values of B1 and B2 were only slightly affected by other factors, while they were mainly influenced by the plasma concentration. The results of this research have provided the basic material for a stability study of a tailings dam and the analysis of movement law.

Experimental study on the overall settling behavior of copper tailings suspension

Laboratory Study on Self-Weight Sedimentation and Consolidation Behaviors of Hydraulic-Dredged Mud

Hindered settling of flocculated multi-sized particle suspension, part I: Segregation mechanism of non-flocculated particles

Influence of Coarse Tailings on Flocculation Settlement

A simple laboratory experiment of the hindered settling process of high-concentration sediment suspension

Experimental Research on the Rheological Properties of Tailings and Its Effect Factors

Study on strengthening of sulfide tailings high-efficiency solid-liquid separation using water reducing admixtures

Experimental Study on Tailings Deposition Distribution Pattern and Sedimentation Characteristics

Iron Tailings Gravitational Settling Law and Implementation

Experimental Study on Flocculation of the Cyanide Tailings

Settling Behavior of Clay Suspensions Produced by Dredging Activities in China

Experimental Study on Mechanical Characteristics of Copper Tailing Materials with Sulfur Content

Experimental study on flocculating sedimentation of ultra-fine unclassified tailings

Effect of Turbulent Fluctuation on Settling Behavior of Dredged Slurry in Sheared Condition

Investigation of Flocculation Behavior of Tailings During Settling-Concentration: Influence of True Density, Particle Size, and Mud Layer Height

Research on the Dynamic Characteristics in the Flocculation Process of Mineral Processing Tailings.

Laboratory Experimental Study of the Evaporation and Mechanical Behaviour of Deposited Tailings.

Experimental Study on Flocculating Sedimentation of Tailings Slurry in a Vertical Sand Tank

An experimental comparison: Horizontal evaluation of valuable metal extraction and arsenic emission characteristics of tailings from different copper smelting slag recovery processes.

Experimental Study On Physical And Mechanical Properties Of Iron Tailing Materials

Study on the Effect of Flocculation and Sedimentation on the Mechanical Properties of Iron Tailing Sand