Abstract:Lead halide perovskite has in recent years gained widespread interest due to its excellent physical and chemical properties, as well as superior optoelectronic performance. However, some restrictions still preclude full industrialization of the material, in particular toxicity issues and instability as a result to sensitivity to humidity. Lead-free all-inorganic double perovskite materials have thus recently become a focus of research. Herein, a new narrow bandgap lead-free double perovskite solar cell with a high-quality Cs2PtI6 film is proposed. It exhibits an optical bandgap of 1.37 eV, absorption within a wide range of wavelengths, and a high absorption coefficient. Following optimization, the device displays a best power conversion efficiency of 0.72% with an open-circuit voltage of 0.73 V, a short-circuit current of 1.2 mA/cm2, and a fill factor of 0.82. Crucially, it also demonstrates excellent stability when exposed to extreme conditions such as high humidity, high temperature, and UV-light irradiation. Stability tests show that the PSCs can retain almost 80% of the original efficiency over 60 days stored in ambient temperature without any encapsulation, boosting prospects for applications of lead-free perovskite solar cells.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c11429?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c11429</a>.Photos of long time stability test of single crystal stored in water; XRD patents of stability and Tauc plot of Cs2PtI6 film deposed on glass; UPS data of deferent corresponding HI adding films; J–V curves of different precursor concentrations and corresponding EIS data; J–V curves of the champion cells with and without HI addition; XPS profiles of Pt 4d, I 3d, and Cs 3d core level, corresponding to Cs2PtI6 thin films; long-term stability images change the process of the device in air and high temperature as well as immerged in water; and summary of the fitting results of the XRD TRPL and EIS measurements (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c11429/suppl_file/am0c11429_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Mixed Valence Perovskite Cs 2 Au 2 I 6 : A Potential Material for Thin‐Film Pb‐Free Photovoltaic Cells with Ultrahigh Efficiency

Novel Lead-Free Material Cs 2 PtI 6 with Narrow Bandgap and Ultra-Stability for Its Photovoltaic Application

Promising Lead-Free Double-Perovskite Photovoltaic Materials Cs2MM′Br6 (M = Cu, Ag, and Au; M′ = Ga, In, Sb, and Bi) with an Ideal Band Gap and High Power Conversion Efficiency

Alkali Metal Ion-Regulated Lead-free, All-Inorganic Double Perovskites for HTM-free, Carbon-Based Solar Cells

The Dion-Jacobson perovskite CsSbCl<sub>4</sub>: a promising Pb-free solar-cell absorber with optimal bandgap 1.4 eV, strong optical absorption 10<SUP>5</SUP> cm<SUP>-1</SUP>, and large power-conversion efficiency above 20%

Cs2TiI6: A potential lead-free all-inorganic perovskite material for ultrahigh-performance photovoltaic cells and alpha-particle detection

The Prospects and Challenges for Ambi‐Polar Vacancy‐Ordered Double Perovskite Cs2SnI6 towards Realization of High Efficiency Air‐Stable Solar‐Cells

Inorganic CsPb1−xSnxIBr2 for Efficient Wide‐Bandgap Perovskite Solar Cells

Structural and Electronic Properties of Hybrid Perovskites for High-Efficiency Thin-Film Photovoltaics from First-Principles

Single-Source Vapor-Deposited Cs2AgBiBr6 Thin Films for Lead-Free Perovskite Solar Cells

Mixed-halide vacancy-ordered double perovskite for photovoltaic and photocatalysis applications

Fundamental Understanding in the Performance-Limiting Factors of Cs2AgBiBr6-based Perovskite Photovoltaics

(Invited) High Efficiency and Low Hysteresis Solar Cells Based on Perovskite with Triple Cation and Mixed Pb-Sn

Lead-free layered Aurivillius-type Sn-based halide perovskite Ba 2 X 2 [Cs n −1 Sn n X 3 n +1 ] (X = I/Br/Cl) with an optimal band gap of ∼1.26 eV and theoretical efficiency beyond 27% for photovoltaics

Ultra-smooth CsPbI2Br Film Via Programmable Crystallization Process for High-Efficiency Inorganic Perovskite Solar Cells

An In‐Depth Investigation of the Combined Optoelectronic and Photovoltaic Properties of Lead‐Free Cs2AgBiBr6 Double Perovskite Solar Cells Using DFT and SCAPS‐1D Frameworks

Lead-free Layered Aurivillius-type Sn-based Halide Perovskite Ba2X2[Csn−1SnnX3n+1] (X = I/Br/Cl) with an Optimal Band Gap of ∼1.26 Ev and Theoretical Efficiency Beyond 27% for Photovoltaics

Intermediate‐Adduct‐Assisted Growth of Stable CsPbI 2 Br Inorganic Perovskite Films for High‐Efficiency Semitransparent Solar Cells

Recent Advances in Cs2AgBiBr6-Based Halide Double Perovskites As Lead-Free and Inorganic Light Absorbers for Perovskite Solar Cells

Band Matching Strategy for All-Inorganic Cs2AgBiBr6 Double Perovskite Solar Cells with High Photovoltage

Optimization of the architecture of lead-free CsSnCl3-perovskite solar cells for enhancement of efficiency: A combination of SCAPS-1D and wxAMPS study