Abstract:To solve the problems of congestion and accident risk when multiple vehicles merge into the merging area of a freeway, a platoon split collaborative merging (PSCM) method was proposed for an on-ramp connected and automated vehicle (CAV) platoon under a mixed traffic environment composed of human-driving vehicles (HDV) and CAVs. The PSCM method mainly includes two parts: merging vehicle motion control and merging effect evaluation. Firstly, the collision avoidance constraints of merging vehicles were analyzed, and on this basis, a following–merging motion rule was proposed. Then, considering the feasibility of and constraints on the stability of traffic flow during merging, a performance measurement function with safety and merging efficiency as optimization objectives was established to screen for the optimal splitting strategy. Simulation experiments under traffic demand of 1500 pcu/h/lane and CAV ratios of 30%, 50%, and 70% were conducted respectively. It was shown that under the 50% CAV ratio, the average travel time of the on-ramp CAV platoon was reduced by 50.7% under the optimal platoon split strategy compared with the no-split control strategy. In addition, the average travel time of main road vehicles was reduced by 27.9%. Thus, the proposed PSCM method is suitable for the merging control of on-ramp CAV platoons under the condition of heavy main road traffic demand.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the congestion and accident - risk problems that occur when multiple vehicles merge in the highway on - ramp merging area. Specifically, the author proposes a coordinated merging method (PSCM) for the connected autonomous vehicle (CAV) platoons on the ramp in a mixed traffic environment (consisting of human - driven vehicles (HDV) and connected autonomous vehicles (CAV)). This method aims to improve the safety and efficiency of the merging process and reduce the impact on the main - line traffic flow by optimizing the platoon - splitting strategy. ### Core Problems of the Paper 1. **Congestion Problem**: When the vehicle flow on the ramp is high and exceeds the traffic capacity of the merging area, it is prone to cause rear - end collisions, side - collisions and other traffic accidents and traffic congestion. 2. **Accident Risk**: Although the two main methods in the traditional intelligent traffic control system - ramp - flow control and variable - speed - limit control - can relieve congestion to a certain extent, it is difficult to fundamentally improve the vehicle - merging pattern, eliminate merging conflicts, and improve the safety and coordination of the vehicle - merging process. ### Solutions The PSCM method proposed by the author mainly consists of two parts: 1. **Merging - Vehicle Motion Control**: Analyzed the anti - collision constraints of the merging vehicles, and on this basis, proposed the following - merging motion rules. 2. **Merging - Effect Evaluation**: Considered the feasibility and stability constraints of the traffic flow during the merging process, established a performance - measurement function with safety and merging - efficiency as the optimization objectives, and screened out the optimal splitting strategy. ### Experimental Verification Through simulation experiments, the effects under different traffic demands (1500 pcu/h/lane) and different CAV proportions (30%, 50%, 70%) were studied. The results show that under a 50% CAV proportion, the average travel time of the ramp CAV platoons using the optimal platoon - splitting strategy is 50.7% less than that without using the splitting - control strategy, while the average travel time of the main - line vehicles is reduced by 27.9%. ### Main Contributions 1. **Improve Safety and Efficiency**: By means of a reasonable platoon - splitting strategy, making full use of the gaps in the main - line traffic flow, the safety and efficiency of the ramp - vehicle merging are improved, and the interference with the main - line traffic flow is reduced. 2. **Strong Adaptability**: The PSCM method does not require the main - line vehicles to perform speed coordination, that is, it does not require forcibly specifying the CAV proportion in the main - line traffic flow, and is applicable to the highway merging areas that need to improve the intelligence level and have a low main - line penetration rate. In conclusion, this paper proposes an effective coordinated - merging method, which solves the congestion and accident - risk problems in the highway on - ramp merging area and has important practical application value.

A Collaborative Merging Method for Connected and Automated Vehicle Platoons in a Freeway Merging Area with Considerations for Safety and Efficiency

An optimal trajectory planning for automated on-ramp merging

Combined Safety and Coordination of Connected Automated Vehicles in Merging Area with Featuring Optimal Merging Positions

Safety-Critical and Flexible Cooperative On-Ramp Merging Control of Connected and Automated Vehicles in Mixed Traffic

Cooperative Merging Strategy in Mixed Traffic Based on Optimal Final-State Phase Diagram with Flexible Highway Merging Points

A cooperative control method for safer on-ramp merging process in heterogeneous traffic flow

Platoon-based Control Strategy in Mixed Traffic to Improve Ramp Merging Efficiency and Fuel Reduction

A cooperative merging speed control strategy of CAVs based on virtual platoon in on-ramp merging system

A Review of Connected and Automated Vehicle Platoon Merging and Splitting Operations

A Cooperative Merging Control Method for Freeway Ramps in Connected and Autonomous Driving

A time and energy efficient merging control for platoon formation of connected and automated electric vehicles at on-ramps

A Hierarchical Model-Based Optimization Control Approach for Cooperative Merging by Connected Automated Vehicles

Optimizing Highway Ramp Merge Safety and Efficiency via Spatio-Temporal Cooperative Control and Vehicle-Road Coordination

Merging Maneuver Technique for an Adaptive Autonomous Platoon in Multi-Lane Highways

Bi-level Ramp Merging Coordination for Dense Mixed Traffic Conditions

Cooperative On-Ramp Merging Control Model for Mixed Traffic on Multi-Lane Freeways

Operation analysis of freeway mixed traffic flow based on catch-up coordination platoon

Multi-Lane Coordinated Control Strategy of Connected and Automated Vehicles for On-Ramp Merging Area Based on Cooperative Game

Distributed multilane merging for connected autonomous vehicle platooning

Balancing Computation Speed and Quality: A Decentralized Motion Planning Method for Cooperative Lane Changes of Connected and Automated Vehicles.

Cooperative Group Control Strategy in the on-Ramp Area for Connected and Automated Vehicles under Mixed Traffic Environment