Abstract:In recent ten years, shale gas has become more and more popular in the world because of its reach storage and cleanliness compared with traditional fossil fuels like coal. On the other hand, the pressure of greenhouse effect urges us to find new ways to deal with carbon dioxide emission. As an important part in the Carbon Capture and Storage System, CO2 is injected into the shale gas reservoir in order to enhance the gas production through competitive absorption between methane and carbon dioxide. In shale reservoir, carbon dioxide is much stronger in adsorption than methane, so the adsorption methane will be desorbed into the free phase by carbon dioxide. More shale gas is then produced by reducing its partial pressure during the production period. It is estimated that continuous carbon dioxide injection at overpressures of 8 MPa enhance gas recovery of 28.5% respectively over 30 years . Moreover, in reservoir of high water sensitivity, CO2 has its advantage for the limitations of hydraulic fracturing . Thus, the technique of carbon dioxide displacement of the methane stored in the shale nanopores is of great significance for future exploitation of shale gas as well as the efficient application of carbon dioxide. However, there is currently limited understanding of the mechanism of competitive absorption between methane and carbon dioxide, especially in nanopores under 10 nm, where how effectively carbon dioxide replace methane is of great importance for the production of shale gas. Although the similar mechanism in CO2 enhanced coal bed methane (CO2-ECBM) has been studied for many years , the research in shale gas has its unique challenge due to the ultra-low permeability and ultracomplex pore structures in the shale rock . The traditional experiment investigation of adsorption process like volume method or weight method struggles in distinguishing the two phases of adsorption gas and free gas in nanopores. In addition, it can hardly tell the influence of different pore structures in shale to gas contents and adsorption capacity. Here, we try to find an effective quantitative measuring method for gas adsorption. Low-field nuclear magnetic resonance (NMR) technique can meet our requirements of obtaining the scanning signal of free methane gas in nanopores. In the NMR system, the H atoms absorb energy from the electromagnetic radiation and jump to the high energy level. When the excitation is stopped, the atomic magnetic moment perpendicular to the external magnetic field will reduce to zero, which is called transverse relaxation. By the inversion of the relaxation time T2, the distribution of free methane in nanopores can be analysed as shown in Fig. 1.

High-pressure low-field 1H NMR relaxometry in nanoporous materials

How Gaseous Environment Influences a Carbon Nanotube-Based Mechanical Resonator

Methane storage in nanoporous media as observed via high field NMR relaxometry

In Situ High-Pressure Nmr Observations on the Formation and Dissociation of Methane Hydrate

Methane Adsorption Capacity Measurement in Shale Matrix Nanopores at High Pressure by Low-field NMR and Molecular Simulation

NMR Relaxation of Gas Adsorbed in Microporous Material

Research on Adsorption and Desorption Characteristics of Gas in Coal Rock Based on Nuclear Magnetic Resonance Technology

NMR studies of adsorption and diffusion in porous carbonaceous materials

Table-top NMR system for high-pressure studies with in-situ laser heating

Methane adsorption in nanoporous carbon: the numerical estimation of optimal storage conditions

Competitive Adsorption of Carbon Dioxide and Methane in Shale : Experimental Investigations by Lowfield Nuclear Magnetic Resonance

Multiphase imaging of gas flow in a nanoporous material using remote-detection NMR

Re-evaluating adsorbed and free methane content in coal and its ad- and desorption processes analysis

Application of a Modified Low-Field NMR Method on Methane Adsorption of Medium-Rank Coals

Nanoprobe Measurements Of Materials At Megabar Pressures

High-Pressure Methane Storage in Porous Materials: Are Carbon Materials in the Pole Position?

NMR close to Mega-Bar Pressures

Towards Quantifying the Chemical Sensitivity of Nuclear Spin Surface Relaxivity in Mesoporous Media

Composition Determination of Low-Pressure Gas-Phase Mixtures by 1H NMR Spectroscopy

NMR Relaxation to Probe Zeolites: Mobility of Adsorbed Molecules, Surface Acidity, Pore Size Distribution and Connectivity

A NMR technique for the analysis of pore structure: Application to materials with well-defined pore structure