Abstract:Aerial manipulator (AM) systems are significantly more effective than both conventional manipulators and flying robots, especially in disaster rescue settings, because they can perform human-like interaction tasks in flight. However, controlling the contact force of an AM is difficult due to the coupling between its flying platform and manipulator. This paper proposes a contact force control framework to address this problem. First, the UAV/AM position response under an external force is studied, and it is theoretically shown that a closed-loop UAV/AM behaves as a spring-mass-damper system. Second, a contact force controller is designed using an inverse-dynamics method. Third, an attitude feed-forward approach is employed to improve the force tracking performance. Then, the real-time contact position is introduced into the control system to achieve interaction with an actively moving environment. Finally, an innovative AM is developed and subjected to flight experiments, validating the proposed framework. An AM’s characteristics in interaction operations are summarized, and general conclusions are drawn. This study is novel in that 1) the contact force control is implemented without relying on force sensors, 2) the whole framework is applicable for controlling a constant/variable contact force with high closed-loop performance, and 3) it can also perform reliable interaction with a dynamic and unknown environment. Note to Practitioners—This study is motivated by the contact force control problem of an aerial manipulator (AM) during interaction operations. Previous approaches have explored the feasibility of controlling contact forces to some extent, but they lack universality and assume a static environment. Ensuring sufficient safety and providing reliable solutions in real-world applications remain challenging. This paper aims to investigate the position response of a closed-loop aircraft system under external forces, without disrupting its existing steady flight. The proposed method transforms contact force control into position control, eliminating the need for a force sensor. A series of aerial experiments were conducted to validate the effectiveness and applicability of the method in various scenarios. Our ongoing work will focus on migrating such an AM system from a laboratory scenario to the real world.

Active Interaction Force Control for Contact-Based Inspection With a Fully Actuated Aerial Vehicle

Physical Interaction Oriented Aerial Manipulators: Contact Force Control and Implementation

Passive Aligning Physical Interaction of Fully-Actuated Aerial Vehicles for Pushing Tasks

A fully actuated aerial manipulator system for industrial contact inspection applications

A coordinated framework of aerial manipulator for safe and compliant physical interaction

Learning Variable Impedance Control for Aerial Sliding on Uneven Heterogeneous Surfaces by Proprioceptive and Tactile Sensing

Aerial Interaction with Tactile Sensing

Static-Equilibrium Oriented Interaction Force Modeling and Control of Aerial Manipulation with Uni-Directional Thrust Multirotors

Fully-Actuated Aerial Manipulator for Infrastructure Contact Inspection: Design, Modeling, Localization, and Control

Physical Interaction and Manipulation of the Environment using Aerial Robots

Development of a semi-autonomous framework for NDT inspection with a tilting aerial platform

Highly dynamic physical interaction for robotics: design and control of an active remote center of compliance

Aerial physical interaction via IDA-PBC

Reference Optimization-Based Compliant Control for Aerial Pipeline Inspection Using a Hexacopter With a Robotic Contact Device

Dynamic Image-Based Impedance Control of Aerial Manipulator for Sliding Inspection

Quadrotor Manipulation System: Development of a Robust Contact Force Estimation and Impedance Control Scheme Based on DOb and FTRLS

Enhancing Tool Manipulation of An Aerial Vehicle with A Dynamically Displacing Center-of-Mass

Passive Compliance Control of Aerial Manipulators

Safety-Conscious Pushing on Diverse Oriented Surfaces with Underactuated Aerial Vehicles

Vision-Guided Contact Force Control of an Omnidirectional Unmanned Aerial Vehicle

Unified Contact Model and Hybrid Motion/force Control for Teleoperated Manipulation in Unknown Environments