Abstract:Aerial manipulator (AM) systems are significantly more effective than both conventional manipulators and flying robots, especially in disaster rescue settings, because they can perform human-like interaction tasks in flight. However, controlling the contact force of an AM is difficult due to the coupling between its flying platform and manipulator. This paper proposes a contact force control framework to address this problem. First, the UAV/AM position response under an external force is studied, and it is theoretically shown that a closed-loop UAV/AM behaves as a spring-mass-damper system. Second, a contact force controller is designed using an inverse-dynamics method. Third, an attitude feed-forward approach is employed to improve the force tracking performance. Then, the real-time contact position is introduced into the control system to achieve interaction with an actively moving environment. Finally, an innovative AM is developed and subjected to flight experiments, validating the proposed framework. An AM’s characteristics in interaction operations are summarized, and general conclusions are drawn. This study is novel in that 1) the contact force control is implemented without relying on force sensors, 2) the whole framework is applicable for controlling a constant/variable contact force with high closed-loop performance, and 3) it can also perform reliable interaction with a dynamic and unknown environment. Note to Practitioners—This study is motivated by the contact force control problem of an aerial manipulator (AM) during interaction operations. Previous approaches have explored the feasibility of controlling contact forces to some extent, but they lack universality and assume a static environment. Ensuring sufficient safety and providing reliable solutions in real-world applications remain challenging. This paper aims to investigate the position response of a closed-loop aircraft system under external forces, without disrupting its existing steady flight. The proposed method transforms contact force control into position control, eliminating the need for a force sensor. A series of aerial experiments were conducted to validate the effectiveness and applicability of the method in various scenarios. Our ongoing work will focus on migrating such an AM system from a laboratory scenario to the real world.

Development of a semi-autonomous framework for NDT inspection with a tilting aerial platform

Fully-Actuated Aerial Manipulator for Infrastructure Contact Inspection: Design, Modeling, Localization, and Control

Active Interaction Force Control for Contact-Based Inspection With a Fully Actuated Aerial Vehicle

Passive Aligning Physical Interaction of Fully-Actuated Aerial Vehicles for Pushing Tasks

Flexible integration of robotics, ultrasonics and metrology for the inspection of aerospace components

Versatile Airborne Ultrasonic NDT Technologies via Active Omni-Sliding with Over-Actuated Aerial Vehicles

Design, Sensing, and Control of a Novel UAV Platform for Aerial Drilling and Screwing

Evaluation of a Skill-based Control Architecture for a Visual Inspection-oriented Aerial Platform

Optical Tactile Sensing for Aerial Multi-Contact Interaction: Design, Integration, and Evaluation

Evaluating Unmanned Aerial Vehicles for Vibrational Analysis: Exploiting Integrated Capabilities of Nano-Drones as Nodes in a WSN

A fully actuated aerial manipulator system for industrial contact inspection applications

An Embedded Platform for Positioning and Obstacle Detection for Small Unmanned Aerial Vehicles

Development of a Robotic Arm Control Platform for Ultrasonic Testing Inspection in Remanufacturing

Reference Optimization-Based Compliant Control for Aerial Pipeline Inspection Using a Hexacopter With a Robotic Contact Device

A perching and tilting aerial robot for precise and versatile power tool work on vertical walls

Integrated design of an aerial soft-continuum manipulator for predictive maintenance

Modeling and Control of an Omnidirectional Micro Aerial Vehicle Equipped with a Soft Robotic Arm

Control framework of the ROBILAUT soil sampling robot: system overview and experimental results

AERIAL-CORE: AI-Powered Aerial Robots for Inspection and Maintenance of Electrical Power Infrastructures

Dynamic Center-of-Mass Displacement in Aerial Manipulation: An Innovative Platform Design

Physical Interaction Oriented Aerial Manipulators: Contact Force Control and Implementation