Abstract:The issue of discharging waste, especially heavy metals from industrial activities into the environment, not only adversely impacts environmental quality but also has impacts on communities and human health. Removal and reduction of heavy metal contamination in rivers and wastewater are, therefore, critical initiatives that require significant attention. This work studied the removal of heavy metals, including Zn(II), Cu(II), As(III), and Pb(II) by utilizing an upcycled amidoxime low-density polyethylene sheet (AO-sheet). The synthesized AO-sheet was analyzed for various physical properties, including scanning electron microscope, energy-dispersive x-ray spectroscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis. For the batch adsorption experiment, parameters affecting adsorption capacity were studied: initial concentration, submerging time, and pH. Adsorption isotherms were also studied. The results of the heavy metal adsorption study showed that the initial concentration was the most significant parameter; the higher the initial concentration, the greater the adsorption capacity. The adsorption capacity of Zn(II) and Pb(II) increased with submersion time, which achieved 21.07 and 0.855 mg/g-adsorbent, respectively, after four weeks of submersion under the highest initial concentration studied. The adsorption capacity of Cu(II) was 7.98 mg/g-adsorbent after two weeks of optimal adsorption duration under the highest initial concentration studied. The adsorption capacity of As(II) was 1.07 mg/g-adsorbent after one week of optimal submersion time under the highest initial concentration studied. Moreover, the appropriate pH range for effective adsorption of Zn(II), Cu(II), and Pb(II) was identified as 8-9, while for As(III), it was 6-8, with an adsorption duration of 0.43 weeks (3 days). From the Langmuir isotherm, it was found that the adsorption of this work was characterized by monolayer adsorption. The results demonstrate that the AO-sheet can be effectively used to remove heavy metals from wastewater. Its potential for reusability was up to 8 cycles, with the Zn(II) adsorption capacity being reduced to about 20.37%.

Removal of heavy metal from wastewater by using acetylene gas production sludge

Removal of fluoride and ammoniacal nitrogen from fertilizer wastewater industry using acetylene production sludge (APS)

Synthesis of amidoxime adsorbent prepared by radiation grafting on upcycled low-density polyethylene sheet for removal of heavy metals from wastewater

Application of a Novel Strategy—advanced Fenton-chemical Precipitation to the Treatment of Strong Stability Chelated Heavy Metal Containing Wastewater

Removal of Heavy Metals from Industrial Wastewater by Chemical Precipitation: Mechanisms and Sludge Characterization

Removal of Heavy Metals by Pseudomonas sp. – Model Fitting and Interpretation

The efficiency of removing heavy metal ions from industrial electropolishing wastewater using natural materials

Removal of heavy metals from wastewater using agricultural byproducts

Removal of Pb(II) from Industrial Wastewater Using of CuO/Alg Nanocomposite

Heavy metal removal by combining anaerobic upflow packed bed reactors with water hyacinth ponds

Greener Method for the Removal of Toxic Metal Ions from the Wastewater by Application of Agricultural Waste as an Adsorbent

Green and efficient: investigating modified and non-modified walnut shells for heavy metal ion removal in clinical dental sewage treatment

Development of Amyloid-Fibrils-like Functional Materials from Both Anaerobically Digested Sludge and Waste Activated Sludge for Heavy Metal Adsorption

Aerobic granular sludge for complex heavy metal-containing wastewater treatment: characterization, performance, and mechanisms analysis

Reduction of Hexavalent Chromium to Trivalent Chromium using Sludge from Acetylene Gas Production

Heavy Metals Removal by Hydroxide Precipitation and Coagulation-Flocculation Methods from Aqueous Solutions

Physico–chemical treatment techniques for wastewater laden with heavy metals

Concurrent removal of Fe(II), Cu(II), and Zn(II) cations from acid mine drainage by an industrial solid waste - Steel slag: Behaviors and mechanisms

Metals removal from municipal landfill leachate and wastewater using adsorbents combined with biological method

Removal of heavy metal ions from wastewater: a comprehensive and critical review

Green Synthesis of Reusable Adsorbents for the Removal of Heavy Metal Ions