Abstract:Water quality monitoring and predicting the changes in water characteristics require the collection of water samples in a timely manner. Water sample collection based on in situ measurable water quality indicators can increase the efficiency and precision of data collection while reducing the cost of laboratory analyses. The objective of this research was to develop an adaptive water sampling device for an aerial robot and demonstrate the accuracy of its functions in laboratory and field conditions. The prototype device consisted of a sensor node with dissolved oxygen, pH, electrical conductivity, temperature, turbidity, and depth sensors, a microcontroller, and a sampler with three cartridges. Activation of water capturing cartridges was based on in situ measurements from the sensor node. The activation mechanism of the prototype device was tested with standard solutions in the laboratory and with autonomous water sampling flights over the 11-ha section of a lake. A total of seven sampling locations were selected based on a grid system. Each cartridge collected 130 mL of water samples at a 3.5 m depth. Mean water quality parameters were measured as 8.47 mg/L of dissolved oxygen, pH of 5.34, 7 μS/cm of electrical conductivity, temperature of 18 °C, and 37 Formazin Nephelometric Unit (FNU) of turbidity. The dissolved oxygen was within allowable limits that were pre-set in the self-activation computer program while the pH, electrical conductivity, and temperature were outside of allowable limits that were specified by Environmental Protection Agency (EPA). Therefore, the activation mechanism of the device was triggered and water samples were collected from all the sampling locations successfully. The adaptive water sampling with Unmanned Aerial Vehicle-assisted water sampling device was proved to be a successful method for water quality evaluation.

A Novel Automatic Water Autosampler Operated From UAVs for Determining Dissolved Trace Elements

Full Automatic Monitor for In-Situ Measurements of Trace Heavy Metals in Aqueous Environment

An Automated Electronic Tongue for In-Situ Quick Monitoring of Trace Heavy Metals in Water Environment

Autonomous Aerial Water Sampling

Evaluation of a UAV-Assisted Autonomous Water Sampling

Water-Quality Monitoring with a UAV-Mounted Multispectral Camera in Coastal Waters

Collection of Water Samples from an Autonomous Underwater Vehicle for Tracer Analysis

The autonomous clean environmental (ACE) sampler: A trace‐metal clean seawater sampler suitable for open‐ocean time‐series applications

An innovative autonomous robotic system for on-site detection of heavy metal pollution plumes in surface water

UAV and satellite remote sensing for inland water quality assessments: a literature review

Development of an Aerial Drone System for Water Analysis and Sampling

Off-shore and underwater sampling of aquatic environments with the aerial-aquatic drone MEDUSA

Development of an Active, Large Volume, Discrete Seawater Sampler for Autonomous Underwater Vehicles

Adaptive Water Sampling Device for Aerial Robots

Use of Unmanned Surface Vehicles (USVs) in Water Chemistry Studies

In situ Autonomous Acquisition and Preservation of Marine Environmental DNA Using an Autonomous Underwater Vehicle

Real-Time Underway Mapping of Nutrient Concentrations of Surface Seawater Using an Autonomous Flow Analyzer

Automatic sampling of seawater quality based on electric propulsion unmanned ship