Abstract:This work addresses the prediction and optimization of average surface roughness (Ra) and maximum flank wear (Vbmax) of 6061 aluminum alloy during high-speed milling. The investigation was done using a DMU 50 CNC 5-axis machine with Ultracut FX 6090 fluid. Four factors were examined: the table feed rate, cutting speed, depth of cut, and cutting length. Three levels of each factor were examined to conduct 81 experiment runs. The response parameters in these experiments were measurements of Ra and Vbmax. We applied a two-pronged approach that combines machine learning (ML) and a Nondominated Sorting Genetic Algorithm (NSGA-II) to model and optimize Ra and Vbmax. Four ML models were used to predict Ra and Vbmax: linear regression (LIN), support vector machine regression (SVR), a gradient boosting tree (GBR), and an artificial neural network (ANN). The input variables were the significant factors that affect the surface quality and tool wear: the feed rate, depth of cut, cutting speed, and cutting time. Several quality metrics were employed to quantify the performance of the models, such as the root mean squared error (RMSE), mean absolute error (MAE), and coefficient of determination (R2). As a result, SVR and ANN were found to have the best predictive performance for Ra and Vbmax. These models and the NSGA-II-based approach were then employed for multiobjective optimization of cutting parameters during high-speed milling of aluminum 6061. Fifty Pareto solutions were found with Ra in the range of 0.257 to 0.308 μm and Vbmax in the range of 136.198 to 137.133 μm. Experimental validations were then conducted to confirm that the optimum solution was within an acceptable error range. More precisely, the absolute percentage errors for Ra and Vbmax were 2.5% and 1.5%, respectively. This work proposes an effective strategy for efficiently combining machine learning techniques and the NSGA-II multiobjective optimization algorithm. The experimental validations have reflected the potential for applying this strategy in various machining-optimization problems.

A combination of PSO-ANN hybrid algorithm and genetic algorithm to optimize technological parameters during milling 2017A alloy

Multi-Objective Milling Parameter Optimization Base on a Novel Differential Evolution PSO Towards Minimum Energy Consumption

Optimization of backpropagation neural network-based models in EDM process using particle swarm optimization and simulated annealing algorithms

Pareto Fronts of Machining Parameters for Trade-off among Energy Consumption, Cutting Force and Processing Time

Analysis of Multi-Objective Optimization of Machining Allowance Distribution and Parameters for Energy Saving Strategy

Estimation of tool wear and optimization of cutting parameters based on novel ANFIS-PSO method toward intelligent machining

The use of support vector machine, neural network, and regression analysis to predict and optimize surface roughness and cutting forces in milling

Sequencing the features to minimise the non-cutting energy consumption in machining considering the change of spindle rotation speed

Genetic Algorithm-Based Optimization of Artificial Neural Network of Process Parameters and Characterization of Machining Errors in Graphene Mixed Dielectric

Predictive modelling and Pareto optimization for energy efficient grinding based on aANN-embedded NSGA II algorithm

Optimization and prediction of surface quality and cutting forces in the milling of aluminum alloys using ANFIS and interval type 2 neuro fuzzy network coupled with population-based meta-heuristic learning methods

A Hybrid Nondominant-Based Genetic Algorithm (NSGA-II) for Multiobjective Optimization to Minimize Vibration Amplitude in the End Milling Process

Machine Learning-Based Modelling and Meta-Heuristic-Based Optimization of Specific Tool Wear and Surface Roughness in the Milling Process

Multi-objective optimization of hard milling process of AISI H13 in terms of productivity, quality, and cutting energy under nanofluid minimum quantity lubrication condition

Sustainable machining of superalloy in minimum quantity lubrication environment: leveraging GEP-PSO hybrid optimization algorithm

Assessment of performance parameters in intermittent turning and multi-response optimization of machining conditions using DF, MOORA, VIKOR, and coupled NSGAII-VIKOR methods

Development of Hybrid Artificial Neural Network–Particle Swarm Optimization Model and Comparison of Genetic and Particle Swarm Algorithms for Optimization of Machining Fixture Layout

Multi-objective integrated optimization of tool geometry angles and cutting parameters for machining time and energy consumption in NC milling

Online monitoring and multi-objective optimisation of technological parameters in high-speed milling process

Multiobjective Optimization of Surface Roughness and Tool Wear in High-Speed Milling of AA6061 by Machine Learning and NSGA-II

Energy Consumption Analysis Of Machining Centers Using Bayesian Analysis And Genetic Optimization