Abstract:The composite processing technique and nanofiller concentration and its functionalization significantly alter the properties of polymer nanocomposites. To realize this, multi-walled carbon nanotubes (CNT) were dispersed in a poly(vinylidene fluoride) (PVDF) matrix at carefully selected CNT concentrations by two illustrious methods, such as solution-cast and melt-mixing. Notwithstanding the processing method, CNTs induced predominantly the γ-phase in PVDF, instead of the commonly obtained β-phase upon nanofiller incorporation, and imparted significant improvements in dielectric properties. Acid-treatment of CNT improved its dispersion and interfacial adhesion significantly with PVDF, and induced a higher γ-phase content and better dielectric properties in PVDF as compared to pristine CNT. Further, the γ-phase content was found to be higher in solution-cast composites than that in melt-mixed counterparts, most likely due to solvent-induced crystallization in a controlled environment and slow solvent evaporation in the former case. However, interestingly, the melt-mixed composites showed a significantly higher dielectric constant at the onset of the CNT networked-structure as compared to the solution-cast composites. This suggests the possible role of CNT breakage during melt-mixing, which might lead to higher space-charge polarization at the polymer-CNT interface, and in turn an increased number of pseudo-microcapacitors in these composites than the solution-cast counterparts. Notably, PVDF with 0.13 vol% (volume fraction, f c = 0.0013) of acid-treated CNTs, prepared by melt-mixing, displayed the relative permittivity of ∼217 and capacitance of ∼5430 pF, loss tangent of ∼0.4 at 1 kHz and an unprecedented figure of merit of ∼10(5). We suggest a simple hypothesis for the γ-phase formation and evolution of the high dielectric constant in these composites. Further, the high-dielectric composite film showed marked improvements in mechanical and thermal properties over the neat PVDF film. These composites with exceptional dielectric properties and concomitant improvement in mechanical and thermal properties offer a great promise for use in flexible and mechanically robust charge storage devices.

Simultaneous enhancement of dielectric and mechanical properties of high‐density polyethylene/nitrile rubber/multiwalled carbon nanotube composites prepared by dynamic vulcanization

A Facile Route to Prepare High−performance Dielectric Nanocomposites of Poly(methyl Methacrylate)/poly(vinylidene Fluoride)/carbon Nanotubes

Dramatically Improved Dielectric Properties of Polymer Composites by Controlling the Alignment of Carbon Nanotubes in Matrix

Improved Dielectric Performance of Polypropylene/ Multiwalled Carbon Nanotube Nanocomposites by Solid-Phase Orientation

Mechanical, thermal, and dielectric properties of polyvinylidene fluoride nanocomposites fabricated by introducing functional MWCNTs /barium titanate compounding dielectric nanofillers

DYNAMIC VULCANIZATION OF THE WASTE RUBBER POWDER/HDPE/POE THERMOPLASTIC ELASTOMERS

Facile Preparation and Properties of Polyvinylidene Fluoride Dielectric Nanocomposites Via Phase Morphology Control and Incorporation of Multiwalled Carbon Nanotubes Conductive Fillers

Morphology, Mechanical Properties and Thermal Behaviour of Poly(Methyl MethAcrylate-CO-N-Vinyl-2-Pyrrolidone)/Poly(Ethylene Glycol)/Multi-Walled Carbon Nanotubes Nanocomposites

High dielectric permittivity and improved mechanical and thermal properties of poly(vinylidene fluoride) composites with low carbon nanotube content: effect of composite processing on phase behavior and dielectric properties

The mechanical and impact properties of MWNTs/LDPE nanocomposites

A Novel Dielectric Elastomer by Constructing Dual-Network Structure of Carbon Nanotubes and Rubber Nanoparticles in Dynamically Vulcanized Thermoplastic Elastomer

Achieving Large Dielectric Property Improvement in Polymer/carbon Nanotube Composites by Engineering the Nanotube Surface Via Atom Transfer Radical Polymerization

Effect of Dynamic Vulcanization on Properties and Morphology of Nylon/San/Nbr Blends: A New Compatibilization Method of Nylon/Abs Blends

Enhanced dielectric performance in flexible MWCNT/poly(vinylidene fluoride-co-hexafluoropropene)-based nanocomposites by designing a tri-layered structure

Synergistic effect of EVA-GMA and nanofillers on mechanical and dielectric properties of polyamide

A Facile Strategy to Enhance the Dielectric and Mechanical Properties of MWCNTs/PVDF Composites with the Aid of MMA-co-GMA Copolymer.

Nitrile-butadiene rubber composites with improved electromechanical properties obtained by modification of BaTiO3 with co-deposited catechol/polyamine and silane grafting

Interfacial engineering of polydimethylsiloxane based dielectric elastomers with excellent electromechanical properties via incorporating polyphenol encapsulated multiwalled carbon nanotube

Giant Dielectric Permittivity Nanocomposites: Realizing True Potential of Pristine Carbon Nanotubes in Polyvinylidene Fluoride Matrix Through an Enhanced Interfacial Interaction

Microwave-Absorbing Performance And Mechanical Properties Of Poly(Vinyl Chloride)/Acrylonitrile-Butadiene Rubber Thermoplastic Elastomers Filled With Multiwalled Carbon Nanotubes And Silicon Carbide

Synchronous Improvement of Mechanical and Damping Properties of Structural Damping Composites with Polyetherimide Non-Woven Fabric Interlayers Loaded with Polydopamine and Carbon Nanotubes