Design of a dynamic target simulator optical system with a large FOV and long exit pupil distance

Tuo Cao,Lingyun Wang,Ling Yun Wang

DOI: https://doi.org/10.1364/ao.510301

IF: 1.9

2024-03-19

Applied Optics

Abstract:Tuo Cao, Ling Yun Wang According to new generation missile test and detection requirements, it is necessary to introduce hardware-in-the-loop (HIL) simulation ... [Appl. Opt. 63, A115-A123 (2024)]

optics

What problem does this paper attempt to address?

Design of detection optical system with large relative aperture

Yingzhe Yang,Yuejia Li,Jia Wang,Jian Bai

DOI: https://doi.org/10.1117/12.2642018

2023-01-01

Abstract:With the advancement of aerospace technology, space debris generated by the collision and shedding of failed spacecraft is increasing, which threatens the safe operation of spacecraft in orbit seriously, and arouses people's attention to the detection of space debris. To achieve high-performance detection in dark environments, we propose a large relative aperture space-based detection optical system, which has a field of view of 16 degrees, focal length of 182mm, F number of 1.52, and a working wavelength of 450 similar to 850nm. The system contains total 11 lenses, making the imaging performance more sensitive to temperature, therefore, we carry out thermal analysis for the system and use optical compensation method to achieve athermalized design. Finally, the system can work in the range of -10 degrees C similar to+30 degrees C, and the variation of the radius of the spot diagram with temperature is less than 3 mu m. In addition, we control the influence of stray light in the design process in order to observe bright and dark targets simultaneously. The numerical simulation results demonstrate that the veiling glare index of the system is 2.9%, which meets the requirement of dark object observation. The proposed optical system with large relative aperture and excellent imaging quality could be applied to accurate detection of space debris.
A Large Field of View Optical System Design for Space Target Detection

Dongwei Ni,Xuyang Li,Mingyang Yang,Chunlin Tian,Ling Zhang

DOI: https://doi.org/10.1117/12.2500408

2018-01-01

Abstract:An off-axis three-mirror detection system with a large field of view is designed in order to improve the space target detection capability. The optical system is a Cook-TMA with the focal length of 127mm, the F number of 2, the field angle of 25 degrees x 25 degrees and the spectral range of 400-700nm. The primary mirror and the tertiary mirror of the off-axis three-mirror system are all designed by freeform surfaces: the primary mirror is characterized by Zernike polynomial and the tertiary mirror is described by XY polynomial. At the same time, we analyze the related characteristics of Zernike polynomial and XY polynomial. The results show that the freeform surfaces have great advantages in improving the field of view and the imaging quality of the off-axis optical system. The system has high energy concentration and good imaging quality, which can capture and track the target in a wide range is suitable for wide area target monitoring.
Optical design of a visible/short-wave infrared common-aperture optical system with a long focal length and a wide field-of-view

Aqi Yan,Weining Chen,Qianxi Li,min guo,HAO WANG,Min Guo,Hao Wang

DOI: https://doi.org/10.1364/ao.517643

IF: 1.9

2024-03-20

Applied Optics

Abstract:Aqi Yan, Weining Chen, Qianxi Li, Min Guo, Hao Wang Addressing the urgent need for long-distance dim target detection with a wide field-of-view and high sensitivity, this paper proposes a ... [Appl. Opt. 63, 2382-2391 (2024)]

optics
Design for scheme of infrared dual-band target simulator and projection optical system

Yulong Qian,Qingyu Hou,Zhile Wang,Huanyi Zhao

DOI: https://doi.org/10.5768/JAO201435.0501005

2014-01-01

Journal of Applied Optics

Abstract:Through the analysis of the traditional dual-band target simulator ,a target simulator using only one generator and one projection system was put up to solve the problem of high cost and relatively complex structure .Using the method of division of amplitude ,by the filtra-tion of the filter and shading sheet ,the energy of the two bands could transmit according to a specific proportion ,and in the specific integral time ,detector could detect different energy rati-os of the two bands ,which could be used to simulate different infrared targets .Futhermore , the optic design of the projection system in the scheme was conducted .The projection system uses transimission model ,which works in 3 .3 μm~3 .8 μm/4 .4 μm~4 .8 μm with a half field of view of 2 .2° and an F number of 3 .2 ,the system resolution could reach 10 lp/mm .The im-proved simulator can simulate the infrared objects of black body ,gray body ,even selective body (300 K~3 000 K) ,with the radiation energy larger than the detected minimum energy , proving scheme feasible .
Simulation Technology of Dynamic Infrared Triangle Target with Decoy

GAO Ze-dong,ZHU Yuan-yuan,GAO Jiao-bo,LI Jun-na,ZHENG Ya-wei,XIE Jun-hu,WANG Jun,CHEN Qing

DOI: https://doi.org/10.5768/jao201334.0206002

2013-01-01

Abstract:Aiming at the fidelity problem of circular target simulator for simulating the infrared triangle targets such as airplane,missile and so on,a simulation technique of dynamic infrared triangle was studied.Using isosceles triangle geometrical principles,a novel design method was proposed for isosceles triangle aperture whose size and direction were variable serially and centroid was invariable,and the dynamic triangle target with the size of 0°~3°and direction of 0°~360°was achieved.The radiation intensity from 0 to 100% for target or decoy was continuously changed by adopting a combination technique for infrared polarizer with wide spectrum.The decoy's size and location were variable by using two-dimensional mobile platform and changeable circular aperture.The real-time control technology on Windows operating system was studied,and the main control software including Microsoft foundation class(MFC) process and real-time sub-system(RTSS) process was designed,satisfying the 500 μs real-time response of control instruction.The result shows that the dynamic infrared triangle target simulator with a circular decoy can accurately simulate the infrared radiation changing process for attacking airplane or missile and releasing decoy.
Development of Visible-Light Optical Simulator Based on Liquid Crystal on Silicon Technology

Fake Lu,Haifeng Li,Peifu Gu,Xu Liu

DOI: https://doi.org/10.3321/j.issn:0253-2239.2006.05.019

2006-01-01

Abstract:To offer the true to nature target-background images used in the simulation system for homing weapons, a visual-light optical target simulator based on the liquid crystal on silicon (LCOS) technology is established. The typical output images and measurement method and data of the optical parameter are presented. It is proved that the simulator has more appropriate luminance, higher contrast and better uniformity than other conventional ones. Compared with the cathode ray tube (CRT) technology, it avoids the flicker problem and offers steady video outputs, which can greatly improve the seeker's ability of capturing the goal. So the LCOS technology is an ideal choice for optical simulators. Besides, the calculation method of illumination system based on the double fly eye lens is provided and simple results are gained which can also be used in other illumination systems of projection.
Space-Based optical imaging dynamic simulation for spatial target

Chang Xu,Hang Shi,Yanze Gao,Lang Zhou,Qinfeng Shi,Jing Li

DOI: https://doi.org/10.1117/12.2543175

2019-12-18

Abstract:In order to satisfy application requirements of space borne imaging loads development and space target detection technology research, an approach by using space target optical characteristic models and sensor imaging characteristic models to generate original frame images, and using the system complex MTF calculation method to transform original frame images into simulation images is proposed. Additional, the 3D scene generation and driving technology are used to simulate the optical characteristics of space targets in different positions and attitudes during the process of frame image generation. In this approach, imaging factors include space environment, detection system and operation state are taken into consideration, and the target optical characteristics are reproduced realistically, the static or dynamic simulation of detection equipment, simulation verification of target recognition and tracking technology are supported. Simulation results show that this method can reflect characteristics of orientation, attitude and material, signal-to-noise ratio, dynamic range, detection angle, illumination angle and other state on target imaging. Which can satisfy the requirements of ground simulation and provide reference for the research of space target imaging technology.
System design and description of infrared simulator system based on the multidimensional flight table

Chong Huang,Haiqing Chen,Jun Li,Zhengang Yang,Shuang Zhao

DOI: https://doi.org/10.1117/12.822963

2009-01-01

Abstract:This paper deals with the simulation for the army aviation and missile command at the thermal infrared range scale from 2.0 to 4.9μm. The infrared simulator system based on the multidimensional flight table(ISSBMFT) is the significant part of hardware - in - the - loop (HWIL) simulation system for controlling and guiding weapon systems with infrared seekers. It emphasizes on the infrared scene of HWIL simulation experimentation for controlling and guiding weapon and provides a realistic environment of combat with target/jamming which owns the specific properties of radiant spectrum, entrance angle and target's relative distance variation. Optical system is the basis of the characteristics of the simulator. In the system, three-beam structure is put forward which will make the optical path equal. Through settling attenuators, filters, and polaroids in the beams, which modulates the transmittance, the energy proportion is simulated, so as wave energy and the entrance angle. So we can simulate one target and two different forms of jamming through various distance and conformations. Radiant system and controlling system is the guarantee of the simulation. Calculation of energy and the method of controlling is depicted in the article. © 2009 Copyright SPIE - The International Society for Optical Engineering.
Design of Optical Imaging Lens for Intelligent Transportation Monitoring System

Kun WANG,Feng LIN

DOI: https://doi.org/10.3969/j.issn.1003-501X.2016.05.011

2016-01-01

Abstract:A wide waveband, large aperture and target optical imaging lens is designed by using Zemax software, which is applied to recognize license plate in intelligent transportation monitoring system. By using the infrared corresponding technology, the lens can still obtain clear imaging in the dark or night. The near infrared central wavelength is 850 nm. The Zemax multi-configuration design method is used to make visible light and near-infrared light confocal. According to the achromatic theory, appropriate material is chosen to eliminate chromatism and the maximum focal shift is 44μm. After analyzing the lens application parameters, the F number is set to 1.2 and half field of view is 13°. In addition, the lens goes with Sony ICX841 CCD image sensor and the target surface is one inch. And the pixels size is 3.7μm×3.7μm. Furthermore, MTF of all fields are more than 0.3 at the spatial frequency of 135 lp/mm.
Study of IR Imaging Target Simulator Based on Zoom System

王治乐,张伟

DOI: https://doi.org/10.3321/j.issn:1002-1582.2004.04.016

2004-01-01

Optical Technique

Abstract:With the development of infrared counteraction technology, infrared imaging guidance has become the stream of photoelectric precision guidance technology. The situation of the hardware in the loop (HWIL) simulation for infrared imaging guidance weapon system is introduced. As for the HWIL simulation systems that are designed by the principle of one seeker to be simulated with one simulator, the new simulation scheme based on five-axis turntable is proposed. The HWIL simulation systems with zoom projection optical system can be used for the seekers that have different optical parameters, so the ratio of effect to cost is improved. Long wave zoom optical system that is diffraction limited is designed. The zoom ratio is 2.3, and the diameter of spot dispersion is no more than 50μm.
Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

Wei Hou,Jun Zhu,Tong Yang,Guofan Jin

DOI: https://doi.org/10.1088/2040-8978/17/5/055603

IF: 2.1

2015-01-01

Journal of Optics

Abstract:In this paper, a construction method through forward and reverse ray tracing for a design of ultra-wide linear field-of-view (FOV) off-axis freeform systems is proposed. The freeform initial system is numerically constructed by a point-by-point calculation. This method begins with a spherical system solved by the paraxial optical theory. In this method, the primary mirror is calculated through the reverse ray tracing; hence, the size and position of the aperture stop is not affected by the changes of mirrors. The fields in the reverse system are selected to cause certain beam overlaps on the primary mirror between adjacent fields. These overlaps offer a more uniform distribution of data points, improving the calculation of this mirror. As an example, an off-axis freeform system with an ultra-wide linear field-of-view of 70 degrees is designed by this method. The effective focal length of the system is 75 mm, and the F-number is 5.8. The diffraction-limited performance of this freeform system in the visible band and the near infrared and near ultraviolet bands validate the construction method presented in this paper.
Small Target Track Simulation System Designed for Dynamic Infrared Scene Simulation

CHEN Liang,QU Hui-ming,GU Guo-hua,WANG Wen-juan,CHEN Qian

DOI: https://doi.org/10.3969/j.issn.1001-5078.2011.10.018

2011-01-01

Abstract:The traditional indoor test of the infrared search and track system usually uses a test device with several collimators,which are fixed at different azimuth and pitching angles.The test device is not suitable for short distance indoor experiments because of its low accuracy,huge size and uneasiness to move.The proposed small target track simulation system drives the small target disk by a precise stepping motor.The blackbody radiation sources provide target temperature.PC connects the stepping motor through RS-232 serial interface,the software interface written with Visual Basic sets the stepping motor′s running speed,direction and the operating angle value.PC shows the object′s coordinates track and then turns them into azimuth and pitching angles through the measuring angle algorithm.Comparing the azimuth and pitching angles measured by the infrared search and track system with the theoretical value then the tested system′s precision is gained.The design and implementation of the small target track simulation system are discussed in detail.Analysis for the experiment results is also presented.
Design of Zoom Collimator for Television Image Target Simulator

Yawei ZHENG,Jiaobo GAO,Jun WANG,Junna LI,Yu HU,Kefeng SUN,Zedong GAO,Qing CHEN

DOI: https://doi.org/10.3969/j.issn.1003-501X.2015.06.013

2015-01-01

Abstract:Television image target simulator based on the Digital Micromirror Device (DMD) is required to test and evaluate the imaging system of a varying field of view. The design of the zoom collimator for projection is introduced. The zoom system uses a reimaging configuration and switches the lenses to zoom. The aspheric surfaces are used in the optics to improve the image quality and simplify the optics configuration. The light source reflected to the DMD by the Total Internal Reflection prisms (TIR). The optics operates over the near infrared waveband. The long entrance pupil relief of the zoom system provides the sufficient space to place the simulator and the seeker while matching the pupil of the zoom optics and the seeker optics. The optical system zooms at the constant relative aperture. The performance of the optics meets the requirement of the simulator.
Modeling and Simulation of the Optical Properties of Low-Speed Target in Near Space

Xiaoping Du,Hang Chen,Zhengjun Liu,Xiangzheng Cheng

DOI: https://doi.org/10.4028/www.scientific.net/amm.479-480.844

2014-01-01

Abstract:A novel near space target optical properties modeling method based on the reverse Monte Carlo optical tracking is proposed. Both the environment characteristics in near space and the light transmission characteristics in different detection platform mode are considered and analysis in detail. The invalid light can be eliminated adaptively in this model. According to the phase relationship of target-observing systems-the sun, the optical properties of the target can be obtained. Some numerical simulations are made to test the accuracy and capability of the proposed modeling method.
Research on optical simulation of dim target based on passive detection link analysis.

Gaofei Sun,Jierui Zhang,Xianzhu Liu,Yongxiang Guo,Yongqiang Li,Chengliang Guo,Xinglin Zheng,Lei Zhang

DOI: https://doi.org/10.1364/oe.519076

IF: 3.8

2024-03-12

Optics Express

Abstract:In order to meet the ground calibration requirements of optical detection equipment to identify optical characteristics of dim targets, an optical simulation method of dim targets based on passive detection link analysis and bidirectional scattering distribution function model is proposed. The off-axis collimation system for long focal length, the simulated energy transmission model of dim targets and the simplified model of bidirectional scattering distribution function are established. An internal stray light suppression baffle was designed to effectively suppress secondary scattering, and an optical simulation system for dim targets was built. The experimental results show that the system can simulate +7 Mv∼+20 Mv, and the simulation accuracy is better than 0.07 Mv. At the same time, the detection ability of the camera is tested by using the +15 Mv point simulated by the system. The signal-to-noise of the star point target reaches 6.7, which meets the requirements of detection rate and false alarm rate, and realizes the ground test of the camera's detection ability of the dim target.

Medicine,Physics,Engineering
Large Field and High Precision Optical System for Star Tracker

Shuang Wang,Yunhai Geng

DOI: https://doi.org/10.1109/icinfa.2014.6932704

2014-01-01

Abstract:In order to address the existing star tracker's problem of large size and on-orbit gluing, a new telemetric optical system is designed in this paper. And the optical system has a large field of view, a high precision and a small size. Firstly, the optical system's engineering requirements are described and its design specifications are calculated. Based on the calculated results, the initial structure and materials of this optical system are determined. Secondly, the optimization design of structure is conducted with the design principles of optical system, and the imaging performance of this optical system is evaluated by analyzing spot diagram, modulation transfer function, encircled energy and ray aberration curves. Finally, the optical system which has six lenses is optimized to have a field of view 44.7°× 44.7° and a total length 36.9mm. Its distortion accounts for 0.51% of pixel size, and its displacement of centroid from chief ray is equal to 7.89% of pixel size. The simulation results evince that the optical system has a large field of view, a high precision, a small size and less lenses. And the on-orbit gluing problem is eliminated by using this optical system. Moreover, the optical system's simple structure can also benefit its manufacturing and assembly process.
Design and Evaluation of Optical See-Through Head-Mounted Display With Wide FOV Based on Dihedral Corner Reflector Array

Cheng-Mu Tsai,Jun-You Li,Pin Han,Chih-Ta Yen

DOI: https://doi.org/10.1109/access.2021.3107476

IF: 3.9

2021-01-01

IEEE Access

Abstract:Existing optical see-through (OST) head-mounted displays (HMDs) generally utilize plane mirrors with partial transmission to merge the virtual and real-world scenes, which inducing the vignetting effect to result in small field of view (FOV). Accordingly, this paper proposes an OST-HMD system in which a rotationally-symmetric eyepiece with a wide FOV of ±30 degrees is coupled with a dihedral corner reflector array (DCRA) to achieve a sufficient relief distance to project all of the exit rays of the eyepiece into the pupil. The feasibility of the proposed system is evaluated by means of numerical simulations based on optical models of the HMD lens, DCRA and human eye. The simulation results show that the eye can receive the display information in the wide FOV with a sufficient relief distance through this kind of the OST-HMD development.

computer science, information systems,telecommunications,engineering, electrical & electronic
Optical design of a variable view imaging system with the combination of a telecentric scanner and double wedge prisms

Xiaodong Tao,Hyungsuck Cho,Farrokh Janabi-Sharifi

DOI: https://doi.org/10.1364/AO.49.000239

2010-01-10

Abstract:Recent developments in micro-electro-mechanical systems and biotechnology have presented an emerging need for observation of dynamic targets in three-dimensional space. Unfortunately, conventional microscopes with fixed optical parameters have difficulty supplying sufficient vision information because of occlusion, small field of view, and low depth resolution. This paper introduces the design of a variable view imaging system that can supply a flexible view with a relatively large zenith angle and simple kinematics. Because of several performance factors, a multiobjective optimization process is applied to achieve an appropriate design. A prototype system is developed and used to verify the proposed design.
Design and analysis of optical system of semi-active laser seeker

Xiaoqin Pu,Yawen Du,Quanlin Dong

DOI: https://doi.org/10.1088/1742-6596/1650/2/022059

2020-10-01

Journal of Physics: Conference Series

Abstract:Abstract The laser seeker is an important part of navigation guided weapons. The working principle of the laser seeker was expounded, and the optical system of the seeker was designed according to the system index requirements. Its optical system is mainly composed of a receiving optical lens combination and a four-quadrant detector. According to the system performance and technical indicators such as the detection distance of the seeker, the receiving clear aperture, and distortion, the laser imaging spot diameter and the center position range were simulated. The optical system model was established by using CODE-V software. And the spot quality was optimized and evaluated through distortion, trace map, and radial envelope energy curve. Finally, an optical system that satisfies the requirements is designed, and the spot imaging quality is great, and the angular tracking accuracy reaches 0.10° / s.
Multitarget tracking system based on an infrared fish-eye lens.

Gang Li,Li Li,Hongbin Shen,Yongqiang He,Jingxia Huang,Shaojuan Mao,Yuanbo Wang

DOI: https://doi.org/10.1364/AO.52.007919

IF: 1.9

2013-01-01

Applied Optics

Abstract:A multitarget tracking system based on an infrared (IR) fish-eye lens is built to satisfy urgent requirements of large-field IR, multitarget, real-time reconnaissance and tracking. Utilizing an IR fish-eye lens and a 512 x 512 pixel PtSi detector, the system can detect threatening targets at the whole space domain and the whole time domain. The hardware of the system based on a dual-digital signal processor is designed to implement data processing for multitarget tracking algorithms, which include a track initiation algorithm and a modified generalized probability data association algorithm. We also carried out a tracking experiment for two aerial maneuvering targets. Comparing the theoretical and experimental tracks, the availability of the system and the real-time capability of multitarget tracking are validated. (C) 2013 Optical Society of America

Design of a dynamic target simulator optical system with a large FOV and long exit pupil distance

Design of detection optical system with large relative aperture

A Large Field of View Optical System Design for Space Target Detection

Optical design of a visible/short-wave infrared common-aperture optical system with a long focal length and a wide field-of-view

Design for scheme of infrared dual-band target simulator and projection optical system

Simulation Technology of Dynamic Infrared Triangle Target with Decoy

Development of Visible-Light Optical Simulator Based on Liquid Crystal on Silicon Technology

Space-Based optical imaging dynamic simulation for spatial target

System design and description of infrared simulator system based on the multidimensional flight table

Design of Optical Imaging Lens for Intelligent Transportation Monitoring System

Study of IR Imaging Target Simulator Based on Zoom System

Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

Small Target Track Simulation System Designed for Dynamic Infrared Scene Simulation

Design of Zoom Collimator for Television Image Target Simulator

Modeling and Simulation of the Optical Properties of Low-Speed Target in Near Space

Research on optical simulation of dim target based on passive detection link analysis.

Large Field and High Precision Optical System for Star Tracker

Design and Evaluation of Optical See-Through Head-Mounted Display With Wide FOV Based on Dihedral Corner Reflector Array

Optical design of a variable view imaging system with the combination of a telecentric scanner and double wedge prisms

Design and analysis of optical system of semi-active laser seeker

Multitarget tracking system based on an infrared fish-eye lens.