Abstract:Tailored optimization of perovskite solar cells (PSCs) is a persistent objective to achieve the ultimate commercialization purpose, in which the electron/hole transport layer with thickness on the nanometer scale is generally required to maximize the charge collection and minimize the series resistance. Therefore, precise control on the fabrication technology of the charge transport layer is important. Herein, one-dimensional (1D) rutile TiO2 nanorod arrays with a thickness of 1.8 μm have been fabricated and employed as a potential electron extraction layer for high-efficiency all-inorganic CsPbBr3 PSCs for the first time. Arising from the sufficient carrier mobility, excellent conductivity, and superior charge extraction ability by means of regulating the donor concentration with nitrogen atoms, a champion efficiency of 8.50% has been achieved with excellent long-term stability after 50 days storage in air conditions, which is comparable to that of the 200 nm-thick TiO2 layer tailored device. The primary results demonstrate that the TiO2 layer with micrometer scale thickness is also feasible to effectively collect the photogenerated carriers and realize considerable solar-to-electric conversion ability, providing multifarious technologies to fabricate the electron extraction layer.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00688?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00688</a>.ETL film resistance; grain size distributions, half-peak widths of CsPbBr3 films; detailed photovoltaic parameters of solar cells; TRPL spectra; absorption spectra of CsPbBr3 films; XRD patterns of TiO2 films; hysteresis, steady power output, statistical PCEs, and open-circuit voltage decay curves of PSCs; light stability; and cross-sectional SEM images and J–V curves of PSCs tailored by ultra-thick TiO2 nanoparticles fabricated by the pulling technology (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00688/suppl_file/am1c00688_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Improvement of the Performance of Carbon Based All-Inorganic Perovskite Solar Cells by Using Ammonium Acetate Modified Rutile TiO 2 Nanorods Array as the Electron Transport Layer

Low‐Temperature in Situ Amino Functionalization of TiO2 Nanoparticles Sharpens Electron Management Achieving over 21% Efficient Planar Perovskite Solar Cells

Applications of Ba doped rutile TiO2 nanorod arrays in carbon-based all-inorganic perovskite solar cells

Interface Modification by Ammonium Sulfamate for High‐Efficiency and Stable Perovskite Solar Cells

High-Efficiency All-Inorganic Perovskite Solar Cells Tailored by Scalable Rutile TiO 2 Nanorod Arrays with Excellent Stability

Enhancing performance and stability of carbon-based perovskite solar cells by surface modification using 2-(trifluoromethylthio)aniline

Improving the Electron Transport Performance of TiO2 Film by Regulating TiCl4 Post‐Treatment for High‐Efficiency Carbon‐Based Perovskite Solar Cells

ModifyingMesoporous TiO2 by Ammonium Sulfonate Boosts Performanceof Perovskite Solar Cells

Modifying Mesoporous TiO2 by Ammonium Sulfonate Boosts Performance of Perovskite Solar Cells.

TiO2/SnO2 Nanocomposites As Electron Transporting Layer for Efficiency Enhancement in Planar CH3NH3PbI3-Based Perovskite Solar Cells

TiO2 modification with multi-acid treatment for efficient interfacial perovskite-TiO2 electron transport

Efficient and Stable Carbon‐Based CsPbIBr 2 Perovskite Solar Cells by 4‐Aminomethyltetrahydropyran Acetate Modification

A novel dual function acetic acid vapor-assisted thermal annealing process for high-performance TiO2 nanorods-based perovskite solar cells

In Situ Surface Fluorination of TiO 2 Nanocrystals Reinforces Interface Binding of Perovskite Layer for Highly Efficient Solar Cells with Dramatically Enhanced Ultraviolet‐Light Stability

Efficient Perovskite Solar Cells Depending on TiO2 Nanorod Arrays.

In Situ Surface Fluorination of TiO2 Nanocrystals Reinforces Interface Binding of Perovskite Layer for Highly Efficient Solar Cells with Dramatically Enhanced Ultraviolet‐Light Stability

Nitrogen-Doped Titanium Dioxide as a Hole Transport Layer for High-Efficiency Formamidinium Perovskite Solar Cells

Interfacial Post-Treatment for Enhancing the Performance of Printable Carbon-Based Perovskite Solar Cells

High-Efficiency Perovskite Solar Cells Treated by Rutile TiO 2 Nanoparticles (<4 nm) from Ti 3 C 2 MXene Oxidation

Charge transfer enhancement of TiO2/perovskite interface in perovskite solar cells

Constructing amorphous titanium nitride/titanium oxides hybrid electron transporting layer for achieving efficient and stable perovskite solar cells