Abstract:Red mud (RM) cementitious materials were prepared with the thermally, thermoalkali- or thermocalcium-activated RM, steel slag (SS), and other additives. The effects of different thermal RM activation methods on the cementitious material hydration mechanisms, mechanical properties, and environmental risks were discussed and analyzed. The results showed that the hydration products of different thermally activated RM samples were similar with the main products being C-S–H, tobermorite, and Ca(OH) 2 . Ca(OH) 2 was mainly present in thermally activated RM samples, and the tobermorite was mainly produced by samples prepared with thermoalkali- and the thermocalcium-activated RM. The mechanical properties of the samples prepared by thermally and thermocalcium-activated RM had early-strength properties, while the thermoalkali-activated RM samples were similar to the late-strength type of cement properties. The average flexural strength of thermally and the thermocalcium-activated RM samples at 14 days were 3.75 MPa and 3.87 MPa respectively, whereas, the 1000 °C thermoalkali-activated RM samples only at 28 days was 3.26 MPa; the above data could reach the single flexural strength (3.0 MPa) of the first-grade pavement blocks of the building materials industry standard of the People's Republic of China-concrete pavement blocks (JC/T446-2000). The optimal preactivated temperature for different thermally activated RM was different; the optimal preactivated temperature for both thermally and thermocalcium-activated RM was 900 °C, and the flexural strength was 4.46 MPa and 4.35 MPa, respectively. However, the optimal preactivated temperature of thermoalkali activated RM at 1000 °C. The 900 °C thermally activated RM samples had better solidified effects for heavy metal elements and alkali substances. 600~800°C thermoalkali activated RM samples had better solidified effects for heavy metal elements. Different temperatures of thermocalcium-activated RM samples showed different solidified effects on different heavy metal elements, which may be due to the influence of thermocalcium activation temperature on the structural changes of the hydration products of the cementitious samples. In this study, three thermal RM activation methods were proposed, and the co-hydration mechanism and environmental risk study of different thermally activated RM and SS were further elucidated. This not only provides an effective method for the pretreatment and safe utilization of RM, but also facilitates the synergistic resource treatment of solid waste and further promotes the research process of replacing part of traditional cement with solid waste.

Thermochemical heat storage and optical properties of red mud/Mn co-doped high alumina cement-stabilized carbide slag in CaO/CaCO3 cycles

Self-compensation and attenuation mechanisms of carbide slag in multicycle thermochemical heat storage

Improved properties of the Co/Al-doped carbide slag pellet as a potential high-temperature thermal battery by tunable coating strategy

Evaluation of Thermodynamic and Kinetic Properties of Carbide Slag for Fluidized Thermochemical Heat Storage

Acceleration mechanisms of Fe and Mn doping on CO 2 separation of CaCO 3 in calcium looping thermochemical heat storage

CaO/CaCO3 thermochemical energy storage performance of high-alumina granule stabilized papermaking soda residue

Red Mud-Based Perovskite Oxygen Carrier Preparation for Chemical Looping Gasification of Municipal Sludge.

Numerical Simulations of the Impact of CaO/Al2O3 on the Structure and Crystallization Behavior of Red Mud

Fabrication and properties of high-thermal-storage RTO ceramics using bauxite tailings and red mud

Energy-storage materials with stable structure by carbide slag modification by acid impregnation and manganese doping

Simultaneous CO2 capture and thermochemical heat storage by modified carbide slag in coupled calcium looping and CaO/Ca(OH)2 cycles

Study on hydration mechanism and environmental safety of thermal activated red mud-based cementitious materials

Enhanced Performance of High Temperature Aluminate Cementitious Materials Incorporated with Cu Powders for Thermal Energy Storage

Material properties and environmental implications of red mud solidified with blast-furnace slag, silica fume, and sodium hydroxide

Modulating red mud for the fabrication of cementitious material by analyzing the thermal evolution of hydrogarnets

Effects of thermal treatments on the characterisation and utilisation of red mud with sawdust additive

Efficient direct solar-driven thermochemical energy storage of (AlMgFeMn)O CaCO3 pellets in a fluidized bed reactor

Preparation and thermal shock resistance of anorthite solar thermal energy storage ceramics from magnesium slag

The Use of Slag and Red Mud for the Synthesis of a Slag-Based Cementitious Material

Evaluation of Thermochemical Energy Storage Performance of Fe-/Mn-Doped, Zr-Stabilized, CaO-Based Composites under Different Thermal Energy Storage Modes

Experimental Investigation on the CaO/CaCO3 Thermochemical Energy Storage with SiO2 Doping