Abstract:The application of Li-S batteries is hampered by some unresolved issues, including the severe polysulfides shuttle effects and sluggish reaction kinetics. Hence, we designed and prepared tin oxide hydroxide quantum dots (TOH) anchored on a honeycomb porous carbon (HPC) matrix as multifunctional sulfur hosts, and deeply studied the enhancement of TOH on the reaction kinetics of Li-S battery referred to as the apparent activation energy, Li+ ion diffusion coefficient, and reaction barrier. It is proved by density functional theory that the hosts have a higher binding energy to polysulfides than the simplex carbon matrix. Meanwhile, the catalytic TOH can decrease the surface active energy of the redox reaction and accelerate the conversion of sulfur-containing species. Consequently, by means of the synergistic effects of physical capture and chemical adsorption together with catalytic conversion, the comprehensive performances of Li-S batteries are distinctly promoted. In particular, a Li-S battery using as a host delivers a good reversible specific capacity of 1342.95 mAh g–1 at 0.1 C. Moreover, with the current increased to 1 C, it shows a relatively satisfactory specific capacity of 918.05 mAh g–1. After 400 cycles, a competitive specific capacity of 688.54 mAh g–1 can still be maintained with a very low fading rate of 0.06% per cycle. Most importantly, when the sulfur areal loading reaches as high as 4.25 mg cm–2 and electrolyte/sulfur ratio is controlled to be as low as 7 μL mg–1, and the Li-S battery using HPC @TOH as a host can still cycle steadily more than 50 cycles at 0.2 C. Therefore, this work provides an effective manner to boost the comprehensive performance of Li-S batteries by virtue of optimizing and designing the host material with synergistic effects of physical capture, chemical adsorption, and catalytic conversion.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00513?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00513</a>.More experimental details; calculation methods; data processing methods; supplemental HRTEM images; SEM images; the corresponding electrochemical performance of the materials (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00513/suppl_file/ae1c00513_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Tin dioxide coated rice husk silica as lead-acid battery positive additive for enhancing the performance under power-intensive applications

Anodic co-electrodeposition of hierarchical porous nano-SiO2+PbO2 composite for enhanced performance of advanced lead-carbon batteries

Reduced Graphene Oxide Coated with Amorphous Lead As Positive Additive for Enhanced Performance of Lead–carbon Batteries

Hydro-thermal preparation of PbCO3/N-rGO nano-composites as positive additives to improve the performance of lead-acid batteries

Enhanced cycle performance and lifetime estimation of lead-acid batteries

Influence of Hydrated PbO2 Content on the Cycling Performance of Lead-Acid Batteries

Bifunctional Additive: Lead Dioxide Nanoparticle-Doped Graphene Oxide Composites for the Preparation and Performance Study of Positive Electrodes in Lead-Carbon Batteries

Silica-modified SnO2-graphene “slime” for Self-Enhanced Li-Ion Battery Anode

N-doped reduced graphene oxide loading nano lead oxide as negative additive for enhanced properties of lead-carbon batteries

A Catalyst SnO2 Improves the Performance of All-Solid-State Batteries with LiNi0.5Mn1.5o4@SnO2 Cathodes, Pmma-Pvdf@ Li1.3ai0.3ti1.7(Po4)3 Composite Solid Electrolyte and Lithium Metal Anodes

Using silkworm excrement and spent lead paste to prepare additives for improving the cycle life of lead-acid batteries

Effect of Polyaniline-Modified Lignosulfonate Added to the Negative Active Material on the Performance of Lead-Acid Battery

Toward stable lithium-ion batteries: Accelerating the transfer and alloying reactions of Sn-based anodes via coordination atom regulation and carbon hybridization

Enhancing Reaction Kinetics of Sulfur-Containing Species in Li-S Batteries by Quantum Dot-Level Tin Oxide Hydroxide Catalysts

Enhanced Electrochemical Performance Promoted by Tin in Silica Anode Materials for Stable and High-Capacity Lithium-Ion Batteries

Achieving High Performances of Lead-Carbon Battery with MnO2 Positive Additive

A Layered-Carbon/pbso4 Composite As a New Additive for Negative Active Material of Lead-Acid Batteries

Lithiated Hybrid Polymer/Inorganic PAA/MnO 2 Protection Layer for High-Performance Tin Oxide Alloy Anode

In-situ carbon encapsulated Pb/PbO nanoparticles derived from spent lead paste for lead-carbon battery

PbO nanoparticles anchored on reduced graphene oxide for enhanced cycle life of lead-carbon battery

Achieving high performances of lead-carbon battery with MnO 2 positive additive