Abstract:Carbon fiber reinforced hydroxyapatite (CF/HA) composites have been considered as a promising candidate for load-bearing bone replacement. However, high-temperature sintering decomposes HA in CF/HA composites, thereby causing oxidation damage in carbon fibers and decreasing the mechanical properties of the composites. In this study, CF/HA composites with excellent mechanical properties and biological activities were fabricated by spark plasma sintering (SPS). The mechanical properties and microstructures of the composites under different sintering temperatures and fiber contents were systematically investigated. Oxidative damage in CF and interfacial problem between fibers and the matrices in the composites were prevented in contrast to that in CF/HA composites prepared through pressureless or hot-pressing sintering. The reinforcing effect of CF was greatly enhanced owing to the absence of oxidative damage. FTIR and XRD results indicates that the HA phases in the composites did not decompose. HA particles size prepared by SPS was smaller than the one prepared by the traditional sintering method. The addition of CF with excellent electrical and thermal conductivities reduced thermal and electrical gradients in the composites during SPS. Accordingly, CF/HA composites with a refined microstructures and improved mechanical properties were obtained. The hardness and bending strength of 0.5 wt% CF-reinforced HA composites (0.5 C F/HA) were 574.0 H V and 110.4 MPa, respectively. The fracture toughness and brittleness index of 0.5 C F/HA were 2.41 MPa m1/2 and 2.59 μm−1/2, respectively. Importantly, the fracture toughness and bending strength of 0.5 C F/HA were can match the properties of compact bones. The in vitro behaviour of the CF/HA composites for cell morphology and proliferation were evaluated using MC3T3-E1. MC3T3-E1 cultured on the composites fabricated SPS showed significantly higher attachment and proliferation rates than those cultured on composites prepared through pressureless sintering. The CF/HA prepared by SPS showed potential as load-bearing bone substitutes owing to their excellent properties.

Boosting biotribological and biological properties of carbon fiber composites by grafting SiC nanowires and hydroxyapatite for hip joint application

Elevating mechanical and biotribological properties of carbon fiber composites by constructing graphene-silicon nitride nanowires interlocking interfacial enhancement

Simultaneous optimization of mechanical and biotribological properties of carbon fibers reinforced hydroxyapatite-polymer composites by constructing networked Si 3 N 4 nanowires

Synchronously promoted mechanical and biotribological properties of carbon fiber composites by constructing Si3N4 nanowires@pyrolytic carbon intertwined network

Balanced Mechanical and Biotribological Properties of Polymer Composites Reinforced by a 3D Interlocked Si3N4 Nanowire Membrane

Carbon fiber reinforced hydroxyapatite composites with excellent mechanical properties and biological activities prepared by spark plasma sintering

An overview of graphene-based hydroxyapatite composites for orthopedic applications

Design and fabrication of carbon fibers with needle-like nano-HA coating to reinforce granular nano-HA composites

Preparation of silicon coated-carbon fiber reinforced HA bio-ceramics for application of load-bearing bone

Incorporating silica‐coated graphene in bioceramic nanocomposites to simultaneously enhance mechanical and biological performance

Hydroxyapatite Bioceramics Reinforced with Silica-Coated Graphene

Carbon Nanotubes/hydroxyapatite Nanocomposites Fabricated by Spark Plasma Sintering for Bonegraft Applications

Si3N4 nanowires@pyrolytic carbon nanolayers coupled with hydroxyapatite nanosheets as reinforcement for carbon matrix composites with boosting mechanical and friction properties

Improving the mechanical, degradation properties and biocompatibility of nano-hydroxyapatite/chitosan composite scaffold by the introduction of carboxylated bamboo fiber

Incorporating mesoporous SiO 2 -HA particles into chitosan/hydroxyapatite scaffolds: A comprehensive evaluation of bioactivity and biocompatibility

Fabrication of Ceramic Hip Implant Composites: Influence of Silicon Nitride on Physical, Mechanical and Wear Properties

Study on the corrosion resistance of SiC particle-reinforced hydroxyapatite‐silver gradient bioactive ceramic coatings prepared by laser cladding

Friction and Wear Behaviors of Reduced Graphene Oxide- and Carbon Nanotube-Reinforced Hydroxyapatite Bioceramics

Mechanical, Structural, and Biological Properties of Chitosan/Hydroxyapatite/Silica Composites for Bone Tissue Engineering

A Biological Study of Composites Based on the Blends of Nanohydroxyapatite, Silk Fibroin and Chitosan