Abstract:Catalytic combustion has been widely applied to remove the trace combustible pollutants. However, the earth-abundant and high-performance nanocatalysts are still the main research focus on promoting catalytic efficiency. Herein, the Cu and Mn mixed oxides supported on TiO2 nanoparticles with various Cu and Mn molar contents synthesized via the flame spray pyrolysis (FSP) technique are utilized in the catalytic oxidation of lean CO and CH4. Initially, the Cu–Mn/TiO2 nanocatalysts are composed of spherical structures with a diameter of about 20 nm, whose specific surface area is between 60 and 90 m2/g. The Cu element is more evenly distributed on the TiO2 surface than the Mn element, owing to the distinctly different ion radii. Both the copper and manganese cations could incorporate into the TiO2 lattice, which generates oxygen vacancies and enhances the diffusion of oxygen ions, causing the transformation of the antanse to rutile phase. When the molar content of the Cu–Mn increases to less than 30 mol %, the temperature of its reduction peak keeps decreasing due to the hydrogen spillover effect. Moreover, the catalytic performances of the Cu–Mn/TiO2 with 12 mol % loading (12CMT) are all optimal during the low-temperature and the high-temperature stages, which are superior to the FSP-made copper manganese or copper titanium oxides. This is attributed to the small crystal particles, highly dispersed active components of CuOx and MnOx, and the higher ratios of Cu1+/Cu and Mn4+–Oads Lewis acid–base pairs. In addition, the strong interaction between Cu–Mn components and rutile phase support can tremendously promote the activity of catalytic combustion. Under the simulated flue gas, the catalytic properties of 12CMT decreases in comparison with those of CO and CH4 mixed gas due to the introduction of CO2. Ultimately, the Cu–Mn/TiO2 samples exhibit the outstanding water resistance, thanks to the hydrophobization of the catalyst surface.This article has not yet been cited by other publications.

Flame synthesized nanoscale catalyst (CuCeWTi) with excellent Hg0 oxidation activity and hydrothermal resistance

Flame In Situ Synthesis of Metal-Anchored CuO Nanowires for CO Catalytic Oxidation and Kinetic Analysis

Boosting catalytic activity of Cu-Ce solid solution catalysts by flame spray pyrolysis with high Cu+ concentration and oxygen vacancies

Flame Synthesis of Novel Ternary Nanocatalysts Pd/CeO2TiO2 with Promotional Low-Temperature Catalytic Oxidation Properties

Copper-ceria catalysts with improved water and sulfur resistance: Computational design and structural optimization

Flame Spray Pyrolysis Synthesized CuO–CeO2 Composite for Catalytic Combustion of C3H6

Catalytic Combustion of VOCs on Pt/CuMnCe and Pt/CeY Honeycomb Monolithic Catalysts

Studies on Flame-synthesized Low-cost Cu-based Catalysts and the Catalytic Properties

Flame‐Synthesized Copper Dimers: Flame‐Synthesized Ceria‐Supported Copper Dimers for Preferential Oxidation of CO (adv. Funct. Mater. 3/2009)

Promoting SO2 Resistance of a CeO2(5)-WO3(9)/TiO2 Catalyst for Hg0 Oxidation Via Adjusting the Basicity and Acidity Sites Using a CuO Doping Method

Combustion Synthesis of Non-Precious CuO-CeO2 Nanocrystalline Catalysts with Enhanced Catalytic Activity for Methane Oxidation

An ultrastable heterostructured oxide catalyst based on high-entropy materials: A new strategy toward catalyst stabilization via synergistic interfacial interaction

CeO2 nanoparticles modified by CuO nanoparticles for low-temperature CO oxidation with high catalytic activity

Facile synthesis of well-dispersed CeO2–CuOx composite hollow spheres with superior catalytic activity for CO oxidation

Facile preparation of 3D ordered mesoporous CuOx-CeO2 with notably enhanced efficiency for the low temperature oxidation of heteroatom-containing volatile organic compounds

Novel Fe-Ce-O mixed metal oxides catalyst prepared by hydrothermal method for Hg0 oxidation in the presence of NH3

Synthesis of Pt/TixCe(1-x)O2 Nanoparticles by Flame Spray Pyrolysis and Their Catalytic Activities for CO Oxidation

Enhancement in the Hg0 oxidation efficiency and sulfur resistance of CuCl2-modified MnOx-CeOx nanorod catalysts

Improvement in the Hg0 removal performance of CeO2 by modifying with CuO

One-Step Synthesis of Nanostructured Cu–Mn/TiO 2 via Flame Spray Pyrolysis: Application to Catalytic Combustion of CO and CH 4

Flame-made High-Capacity and High Efficient Nanomaterial CuOx-CeOx-WO3/TiO2 for Mercury Adsorption