Abstract:This study details a novel approach to improving the performance and scalability of quantum dot light‐emitting diodes (QLEDs) through the modification of the hole‐injecting PEDOT:PSS layer using methanol (MeOH) and polyethylene glycol (PEG). Small‐area QLEDs fabricated with this modified layer achieved performance metrics comparable to devices by spin‐coating methods. Large‐area QLEDs exhibited uniform emission and high efficiencies, underscoring the potential for scalable, high‐performance QLED production using the blade‐coating technique. The development of scalable and cost‐effective solution processes for large‐area quantum light‐emitting diodes (QLEDs) remains a pressing challenge. In this work, the blade‐coating process is explored for fabricating bottom‐emitting QLEDs using a poly(3,4‐ ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) layer modified with methanol (MeOH) and polyethylene glycol (PEG). By incorporating MeOH into the PEDOT:PSS solution, a significant reduction in surface tension is achieved, resulting in thinner and more uniform films. The addition of PEG further enhanced the film quality by suppressing PEDOT aggregation and improving phase separation, which is confirmed via atomic force microscopy (AFM). These modifications not only enhanced the conductivity of the PEDOT:PSS film due to the conformation changes, but also improved energy level alignment, leading to improved hole‐injecting properties and reduced driving voltages in QLED devices. Small‐area QLEDs with the optimized PEDOT:PSS/MeOH/PEG layer demonstrated peak current efficiencies (CE) and external quantum efficiencies (EQE) comparable to those of spin‐coated devices. The best performance is observed at a PEG concentration of 0.1 mg mL−1, yielding a CE of 33.1 cd A−1 and an EQE of 26.0%. Additionally, large‐area QLEDs (25 × 25 mm) fabricated with this approach showed uniform emission and high efficiencies, underscoring the potential of the blade‐coating method for scalable production of high‐performance QLEDs.

Morphological and Interfacial Engineering with a Surfactant Additive Toward High‐Performance Blade‐Coated Quantum Dot Light‐Emitting Diodes

Efficient larger size white quantum dots light emitting diodes using blade coating at ambient conditions

Engineering Architecture of Quantum Dot-Based Light-Emitting Diode for High Device Performance with Double-Sided Emission Fabricated by Nonvacuum Technique

Optimizing QLED Performance and Stability via the Surface Modification of PEDOT:PSS Experimental Insights and DFT Calculations

Aggregation Control, Surface Passivation, and Optimization of Device Structure toward Near‐Infrared Perovskite Quantum‐Dot Light‐Emitting Diodes with an EQE up to 15.4% (Adv. Mater. 18/2022)

High-Performance, Solution-Processed, and Insulating-Layer-Free Light-Emitting Diodes Based on Colloidal Quantum Dots.

Large-area and efficient perovskite light-emitting diodes via low-temperature blade-coating

Enhanced Performance of Quantum Dot-Based Light-Emitting Diodes with Gold Nanoparticle-Doped Hole Injection Layer

Highly Efficient All-Solution-Processed Quantum Dot Light-Emitting Diodes Using MoOx Nanoparticle Hole Injection Layer

Enhanced Performance of Inverted Perovskite Quantum Dot Light-Emitting Diode Using Electron Suppression Layer and Surface Morphology Control

23% power conversion efficiency light-emitting diodes using monolayer quantum dots

Developing flexible QLEDs using metal oxide and polymer combination

Boosting Cu─In─Zn─S‐based Quantum‐Dot Light‐Emitting Diodes Enabled by Engineering Cu─NiOx/PEDOT:PSS Bilayered Hole‐Injection Layer

Boosting Efficiency and Stability of Green InP Quantum Dot Light-Emitting Diodes by Interface Dipole Modulation

High-performance top-emitting quantum dot light-emitting diodes by balancing electrical conductance and light outcoupling

Use of Hybrid PEDOT:PSS/Metal Sulfide Quantum Dots for a Hole Injection Layer in Highly Efficient Green Phosphorescent Organic Light-Emitting Diodes

Utilizing VO 2 as a Hole Injection Layer for Efficient Charge Injection in Quantum Dot Light-Emitting Diodes Enables High Device Performance

Improving the Device Stability by Controlling the Morphology of Quantum Dot Emissive Layer Via a Coating Process in Blue QLEDs

Systematic strategy for high-performance small molecular hybrid white OLED via blade coating at ambient condition

High-performance, high-resolution quantum dot light-emitting devices through photolithographic patterning

Ultralow Roll‐Off Quantum Dot Light‐Emitting Diodes Using Engineered Carrier Injection Layer