Abstract:A low-noise Brillouin random fiber laser (BRFL) with stabilized lasing output and narrow linewidth is proposed and demonstrated experimentally. Stimulated Brillouin scattering and Rayleigh scattering are exploited to work as the gain and random distributed feedback mechanisms, respectively. A simple unpumped Erbium-doped fiber (EDF) loop structure which consists of a section of EDF and an optical coupler is introduced into the BRFL cavity, forming a saturable absorption ring (SAR). When light with proper intensity is incident into the SAR, a dynamic fiber grating (DFG) can be built up to work as a narrow-bandwidth filter with the ability of auto-tracking the center frequency. The SAR can effectively filter out dense random longitudinal modes and suppress multi-mode resonances and frequency jitters by restricting the mode-competition-induced mode hopping within a limited frequency range of ∼ 1 MHz and auto-tracking the center frequency of light in the cavity, simultaneously. Thus, the output of BRFL with SAR is much more stabilized than existing free-running BRFLs. In the experiment, a stable lasing output with an ultra-narrow linewidth (less than2kHz) is obtained from the proposed BRFL. The measured relative intensity noise and frequency noise demonstrate that the noise level of the proposed laser is significantly lower than that of the free-running BRFLs. This proposed technique not only provides a solution to the dilemma of previously reported BRFLs with severe lasing instabilities, but also makes a step towards the development of practical and reliable BRFLs. This high-quality laser source with advantages of high stability, low cost, low threshold power, high coherence, narrow linewidth, and low noise can find useful applications in coherent optical detection, high-resolution spectrometers, microwave photonics, and optical sensing fields.

Highly stable Brillouin laser with controllable tuning based on fiber ring resonator

Stabilized Narrow-Linewidth Brillouin Random Fiber Laser With a Double-Coupler Fiber Ring Resonator

Stabilized Brillouin laser with sub-Hz fundamental linewidth aided by frequency shifted optical injection locking

Forest Stakeholder Participation in Improving Game Habitat in Swedish Forests

Single-frequency Brillouin lasing based on a birefringent fiber Fabry–Pérot cavity

High-gain lithium niobate brillouin laser with tunable phonon frequency of 1âˆ1⁄431 GHz

Fabrication and performance research of high-stability Brillouin ring laser

A narrow-linewidth high-power fused silica Brillouin laser

Two-Frequency Brillouin Fiber Laser Based on Bragg Grating Fabry-Perot Cavity

Optical Vortex Brillouin Laser

Single-longitudinal-mode narrow linewidth broadband tunable Brillouin random laser including dispersion compensation fibers

Widely Tunable Multi-Wavelength Fiber Laser Based on Cascaded Stimulated Brillouin Scattering in A Compact Linear Cavity

Kilohertz-Linewidth Brillouin Photonic Crystal Fiber Laser With Non-Resonance Pumping Configuration

Low-noise Brillouin random fiber laser with Auto-tracking dynamic fiber grating based on a saturable absorption ring

Enhancement of Brillouin Nonlinearities with a Coupled Resonator Optical Waveguide.

Research of tunable multi-wavelength laser based on amplification effect of stimulated Brillouin scattering

The blood groups of the shona of southern rhodesia

Stimulated Brillouin Laser and Frequency Comb Generation in High-Q Microbubble Resonators.

Enhancing frequency stability and mode control in a Brillouin random fiber laser with a strongly scattering disordered grating

Ultra-narrow Linewidth Laser Based on Stimulated Brillouin Scattering

Stabilizing Brillouin fiber laser for applications in distributed BOTDA sensing