Abstract:Field penetration and ac loss of high-temperature superconductor (HTS) windings wound by parallel-connected (PC) tapes are simulated and calculated. The simulation is given to a winding with six tapes, which are connected to produce either n = 1, 2, 3, or 6 PC current turns. The PC turns are basically organized as two main types according to whether the turn end is soldered or not. The soldering state is controlled by shunt resistances between HTS tapes. Therefore, six independent PC structures are used for simulation. In addition to the HTS tapes, normal conductors, representing the possible reinforcement layers or stabilizer layers, are also built in the finite-element analysis (FEA) model. The simulation is carried out using the FEA software ANSYS, which is combined with the self-developed resistivity-adaption algorithm, a code that can cope with arbitrary FEA software to simulate field penetration into HTS. More importantly, we used the circuit-field analysis, so that we can adjust n values and the shunt resistance independently while we are simulating the field penetration process. AC loss contributed from different parts of the winding is separately studied as Q(HTS), which is hysteresis loss generated in HTS; Q(nor), which is eddy current loss generated in normal conductors; and Q(cc), which is coupling loss generated in shunt resistances. The current profiles and Q(HTS) in each tape of the winding are very sensitive to the specific n value. However, the total Q(HTS) for different PC structures does not significantly change. Even under overestimation, Q(nor) can only be comparable with Q(HTS) when the frequency exceeds 1000 Hz. Q(cc) is prominent at low transport currents but is naturally restrained at high transport currents.

AC Loss Characteristics of HTS Field Winding for Synchronous Motor According to Stator Configuration

Simplified Analytical Model and Investigation of Open-Circuit AC Winding Loss of Permanent-Magnet Machines.

Analytical Model of Eddy Current Loss in Windings of Permanent-Magnet Machines Accounting for Load

Harmonic Analysis of Airgap Magnetic Fields in Doubly-Fed Flux Reversal Permanent Magnet Machines.

Transient Analysis Of Synchronous Generator With Stator Winding Faults Based On Starting Process

Design and Comparison of Segmented Armature Windings for Superconducting Wind Turbine Generators with Multiple Converters

Numerical Study On Ac Loss Characteristics Of Rebco Armature Windings In A 15-Kw Class Fully Hts Generator

Investigation of AC Copper Loss Considering Effect of Field and Armature Excitation on IPMSM With Hairpin Winding

Analysis of fields in an air-cored superconducting synchronous motor with an HTS racetrack field winding

Loss Study of Dual Stator Low Speed High Torque Synchronous Motor with Hybrid Rotor

AC Loss Analysis and Modular Cryostat Design of a 10-MW High-Temperature Superconducting Double Stator Flux Modulation Machine

Magnetic Field Characteristics and Stator Core Losses of High-Speed Permanent Magnet Synchronous Motors

Influence of Coil Position on AC Losses of Stator Superconducting Windings of a Synchronous Machine for a 10 MW Wind Turbine

Comprehensive Analysis of the AC Copper Loss for High Speed PM Machine With Form-Wound Windings

Improved calculation of core losses of high-speed motors with two different permanent magnets considering higher order current harmonics

Optimization of HTS Transformer Parameters and Analysis of AC Losses Under Harmonic Conditions

A Fast Numerical Modeling Approach Based on Boundary Field Method for Calculating AC Losses in Superconducting Motors

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

An Investigation on AC Loss Reduction for Permanent-Magnet Superconducting Electrical Machine

Effects of Stator Winding Configurations on Steady-state Currents Characteristics of Synchronous Generator With Inter-turn Short Circuits of Field Windings

Simulation of Current Profile and AC Loss of HTS Winding Wound by Parallel-Connected Tapes