Abstract:Acrylonitrile-modified aliphatic amine adducts are often used as curing agents for room-temperature epoxy formulations (coatings, adhesives, sealants, castings, etc.), yet the curing reaction and properties of resultant epoxy systems still remain less fundamentally understood. Herein we systematically investigate our newly-developed acrylonitrile-modified multifunctional polyamine curing agent for bisphenol A epoxy resin (DGEBA): an aciylonitrile-capped poly(propyleneimine) dendrimer (PAN4). The impact of the molecular structure of PAN4 and a controlled poly(propyleneimine) dendrimer (1.0GPPI) on the curing reactivity, reaction mechanisms, thermal stability, viscoelastic response and mechanical properties of the epoxy systems are highlighted. Differential scanning calorimetry (DSC) confirms DGEBA/PAN4 shows markedly lower reactivity and reaction exotherm than DGEBA/1.0GPPI, and the model-free isoconversional kinetic analysis reveals that DGEBA/PAN4 has the generally lower reaction activation energy. To be quantitative, the progress of the isothermal cure is predicted from the dynamic cure by using the Vyazovkin equation. The isothermal kinetic prediction shows that DGEBA/PAN4 requires about 10 times longer time to achieve the same conversion than DGEBA/1.0GPPI, which agrees with the experimentally observed much longer gel time of DGEBA/PAN4. Subsequently, dynamic mechanical analysis shows that PAN4 results in the cured epoxy network with the lower beta- and glass-relaxation temperatures, crosslink density, relaxation activation energy, enthalpy, entropy, but the higher damping near room temperature than 1.0GPPI. Finally, thermogravimetric analysis (TGA) demonstrates cured DGEBA/PAN4 is thermally stable up to 200 degrees C, and mechanical property tests substantiate that PAN4 endows the cured epoxy with much higher impact and adhesion strengths than 1.0GPPI. Our data can provide a deeper insight into acrylonitrile-modified aliphatic amine curing agents from the two good model compounds (PAN4 and 1.0GPPI). (C) 2012 Elsevier B.V. All rights reserved.

Effect of curing reaction types on the structures and properties of acetylene-containing thermosets: towards optimization of curing procedure

Effect of Acetylacetone Metal Salts on Curing Mechanism and Thermal Stability of Polybenzoxazine

Molecular Dynamics Simulations of Mechanical Properties of Epoxy-Amine: Cross-linker Type and Degree of Conversion Effects

Cure Kinetics of an Epoxy Resin Containing Naphthyl/dicyclopentadiene Moieties and Bis‐phenoxy (3‐hydroxy) Phosphine Oxide System and Properties of Its Cured Polymer

Acrylonitrile-Capped Poly(Propyleneimine) Dendrimer Curing Agent for Epoxy Resins: Model-Free Isoconversional Curing Kinetics, Thermal Decomposition and Mechanical Properties

The Curing Behavior and Properties of Diglycidyl Ether of 4,4′-Bis(4-hydroxybenzoyloxy)-3,3′,5,5′-tetramethylbiphenyl and Its Composites with Multi-Wall Carbon Nanotubes

Studies on Cure Kinetics of Diglycidyl Ether of 4,4′-Bisphenol/4,4′-diaminobiphenyl Using the Advanced Isoconversional Method

Thermal curing mechanism of acetylene-terminated polyimides: A combination of density functional theory computation and microkinetic analysis

Thermal curing mechanisms and cross-linking network structure of a novel silicon-containing arylacetylene resin with 2,7-diethynylnaphthalene unit

Modeling of curing and post-curing kinetics for a thermoset adhesive

Theoretical Study on Thermal Curing Mechanism of Arylethynyl-Containing Resins

Synthesis and thermal cure of diphenyl ethers terminated with acetylene and phenylacetylene

Investigation of Curing Characterization of Acetylene-Terminated Polyisoimide Oligomer

Effect of Curing Agents on Electrical Properties of Low-Temperature Curing Conductive Coatings and Thermodynamic Analysis

Understanding the Structure-Property Relationship of Anhydride-Cured Epoxidized Vegetable Oils: Modeling and Molecular Dynamics Simulation

Isothermal kinetics and thermodynamics studies of curing reaction of epoxy-aromatic diamine reinforced with epoxy functional MWCNT

Curing and Molecular Dynamics Simulation of MXene/Phenolic Epoxy Composites with Different Amine Curing Agent Systems

Exploring the Impact of Molecular Structure on Curing Kinetics: A Comparative Study of Diglycidyl Ether of Bisphenol A and F Epoxy Resins

A theoretical insight into the curing mechanism of phthalonitrile resins promoted by aromatic amines

Effect of curing agents n‐octylamine and m‐xylene diamine on the mechanical and memory properties of E51 epoxy resin

A Novel Acetylene-Functional/Silicon-Containing Benzoxazine Resin: Preparation, Curing Kinetics and Thermal Properties