Recent developments in current collectors for lithium metal anodes

Qitao Shi,Chen Lu,Yutong Cao,Yufeng Hao,Alicja Bachmatiuk,Mark H. Rümmeli

DOI: https://doi.org/10.1039/d3qm00029j

IF: 8.6834

2023-01-01

Materials Chemistry Frontiers

Abstract:Lithium-ion batteries have been widely used in recent decades.

materials science, multidisciplinary,chemistry

What problem does this paper attempt to address?

Research Progress in Cathode and Anode Materials of Li-ion Battery

Qinggang He

2003-01-01

Abstract:Recent studies on anode and cathode materials for lithium ion battery were reviewed. Cathode materials such as LiCoO 2, LiNiO 2 and LiMnO 4 as well as carbon and non-carbon anode materials were introduced respectively. The prospect of these materials was also revealed.
Advancements in Current Collectors for Composite Lithium Metal Anodes

Shujing Chen,Chen Pan,Qianlong Wang,Jing‐Li Luo,Xian‐Zhu Fu

DOI: https://doi.org/10.1002/adfm.202409812

IF: 19

2024-09-01

Advanced Functional Materials

Abstract:Current collectors are an indispensable component of electrochemical energy storage devices because they play an important role in determining the electrochemical properties and safety of batteries. The recent advances in the current collectors for composite LMA are timely summarized to facilitate designers to suppress Li dendrite growth and improve the safety of Li metal batteries. Lithium (Li) metal batteries have attracted great attention as next‐generation high‐energy‐density storage systems due to the high theoretical energy density and low redox potential of Li metal. However, the safety concerns and poor cycle life are hindering the commercialization of Li metal batteries. Combination of Li metal and current collectors to regulate Li plating/stripping behaviors is an effective strategy to address these issues. In this review, the recent advances in the current collectors for composite Li metal anodes are summarized, including construction interfacial protective layers on current collectors, fabrication and utilization of 3D current collectors, and improving the surface lithiophilicity for current collectors. Finally, perspectives of the current limitations and the future research directions are also presented.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Research Progress on Copper-Based Current Collector for Lithium Metal Batteries

Yongchao Liu,Dian Gao,Hongfa Xiang,Xuyong Feng,Yan Yu

DOI: https://doi.org/10.1021/acs.energyfuels.1c02008

2021-08-03

Abstract:Lithium metal batteries (LMBs) using lithium metal as the anode show great potential in improving energy density and power density than conventional lithium-ion batteries (LIBs). In addition to the common Li-containing cathode materials in LIBs that can be used in LMBs, some Li-free materials (S, O2, etc.) have also been developed and applied to cathodes in LMBs. However, the lithium metal anode with highly chemically activity still faces many challenges. For example, growing lithium dendrites, producing "dead lithium", and causing a series of safety hazards, etc. In addition, in order to use a small amount (or zero excess) of lithium metal to increase the energy density of the battery and meet the mechanical strength of lithium metal anode, using a metal current collector is very important for lithium metal anode. In this Review, we first will discuss the role of cathode and anode current collector in lithium metal. Then we will analyze the influence of anode current collector on lithium metal anode, and highlight the recent progress on copper-based current collector modification strategies. Finally, we will discuss new insights and future directions associated with the copper-based current collector.This article has not yet been cited by other publications.

energy & fuels,engineering, chemical
Advanced 3D Current Collectors for Lithium-Based Batteries

Song Jin,Yu Jiang,Hengxing Ji,Yan Yu

DOI: https://doi.org/10.1002/adma.201802014

IF: 29.4

2018-01-01

Advanced Materials

Abstract:Li-based batteries are a hot research topic because they are the most popular energy storage system for high energy-density devices. As an important component of the battery, the current collectors in both cathode and anode should be well designed. Herein, the design of 3D current collectors for Li-based batteries is considered, including 3D metal-based and carbon-based current collectors. The progress in nanotechnology provides appropriate 3D current collectors characterized by highly efficient morphologies and architectures. In particular, 3D current collectors with different morphology are classified. Critical factors of current collectors that affect the electrochemical performance of Li-based batteries are comprehensively debated. Finally, conclusion and perspectives of the future research in this field are discussed.
Structural Design of 3D Current Collectors for Lithium Metal Anodes: A Review

Guo‐Duo Yang,Ye Liu,Xin Ji,Su‐Min Zhou,Zhuo Wang,Hai‐Zhu Sun,Guo-Duo Yang,Su-Min Zhou,Hai-Zhu Sun

DOI: https://doi.org/10.1002/chem.202304152

2024-02-05

Chemistry - A European Journal

Abstract:Due to the ultrahigh theoretical specific capacity (3860 mAh g‐1) and low redox potential (‐3.04 V vs. standard hydrogen electrode), Lithium (Li) metal anode (LMA) received increasing attentions. However, notorious dendrite and volume expansion during the cycling process seriously hinder the development of high energy density Li metal batteries. Constructing three‐dimensional (3D) current collectors for Li can fundamentally solve the intrinsic drawback of hostless for Li. Therefore, this review systematically introduces the design and synthesis engineering and the current development status of different 3D collectors in recent years (the current collectors are divided into two major parts: metal‐based current collectors and carbon‐based current collectors). In the end, some perspectives of the future promotion for LMA application are also presented.

chemistry, multidisciplinary
Advanced Current Collector Materials for High‐Performance Lithium Metal Anodes

Dongdong Li,Henghui Hu,Bin Chen,Wen‐Yong Lai

DOI: https://doi.org/10.1002/smll.202200010

IF: 13.3

2022-04-20

Small

Abstract:This review summarizes the advanced current collector materials for constructing high‐performance lithium metal anodes including free‐standing metal nanowires, carbon nanofibers, carbon nanotubes, graphene, biomass‐derived porous carbons, and metal–organic frameworks. Superior battery properties based on these materials are introduced with combining specific structural designs. This review provides references for boosting high‐ranking anodes in the field of battery systems in general.Lithium metal, as the "Holy Grail" of lithium battery anodes, is promising to be used in the next‐generation of high‐energy‐density storage devices. However, serious safety risk and poor cycle performance are inevitable when bare lithium foil is used as the anode material, due to the uncontrolled growth of lithium dendrites, unstable solid electrolyte interface, and infinite volume expansion of lithium during cycling, which largely hinder the further commercial application of lithium metal batteries (LMBs). The utilization of up‐to‐date current collectors with specific composition and structure is believed to be effective to overcome these shortcomings. However, a systematic evaluation of the merit of different current collector materials for realizing high‐performance lithium metal anodes is still lacking. This review summarizes the fashionable advanced current collector materials for long‐life LMBs in recent years. The superiorities and related electrochemical performances by using these current collector materials are discussed in detail. It is expected that this review may promote the rational choice of appreciatory current collector materials with unique structure designs to extend the cycle life of lithium metal anodes for achieving the next‐generation of high‐energy‐density LMBs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Copper Current Collector: The Cornerstones of Practical Lithium Metal and Anode-Free Batteries

Jinyang Zhou,Jian Qin,Hui Zhan

DOI: https://doi.org/10.1002/cphc.202400007

IF: 3.52

2024-04-16

ChemPhysChem

Abstract:Comparing with the commercial Li-ion batteries, Li metal secondary batteries (LMB) exhibit unparalleled energy density. However, many issues have hindered the practical application. As an element in lithium metal and anode-free batteries, the role of current collector is critical. Comparing with the cathode current collector, more requirements have been imposed on anode current collector as the anode side is usually the starting point of thermal runaway and many other risks, additionally, the anode in Li metal battery very likely determines the cycling life of full cell. In the review, we first give a systematic introduction of copper current collector and the related issues and challenges, and then we summarize the main approaches that have been mentioned in the research, including Cu current collector with 3D architecture, lithophilic modification of the current collector, artificial SEI layer construction on Cu current collector and carbon or polymer decoration of Cu current collector. Finally, we give a prospective comment of the future development in this field.
A review on structuralized current collectors for high-performance lithium-ion battery anodes

Yang Yang,Wei Yuan,Xiaoqing Zhang,Yuzhi Ke,Zhiqiang Qiu,Jian Luo,Yong Tang,Chun Wang,Yuhang Yuan,Yao Huang

DOI: https://doi.org/10.1016/j.apenergy.2020.115464

IF: 11.2

2020-10-01

Applied Energy

Abstract:<p>As environmentally friendly and high-energy density rechargeable energy storage devices, lithium-ion batteries (LIBs) have thriving prospects in the field of energy. The current collector, which serves as an important component of LIBs, significantly influences the electrochemical performance of the battery. Numerous efforts have been spent on the design and fabrication of high-performance negative current collectors in the field of LIBs to achieve excellent battery performances. These high-performance current collectors are mostly structuralized to achieve special functions. Hence, different types of structuralized current collectors used for LIB anodes are comprehensively discussed and summarized in this paper. The structuralized current collectors used in LIB anodes are classified into planar-plate-based special-surface current collectors and the 3D framework-based porous current collectors. Both types of the structuralized current collectors are further divided into the single-component and multicomponent current collectors. More subsections are provided and focus on providing description of the developing strategies, fabrication methods, electrochemical behaviors, in-depth reasons for high performances, and advantages and challenges for real applications of the structuralized current collectors in detail. Subsequently, the challenges and future research directions of structuralized anode current collectors are reasonably clarified. Based on an objective summary of the high-performance negative current collectors, this review provides an enlightening guide for the future development of current collectors and LIBs. The fundamental conclusions can also be extended to other energy storage devices.</p>

energy & fuels,engineering, chemical
Advances in anode current collectors with lithiophilic gradient for lithium metal battery

Chenglin Gao,Jianli Kang,Yimin Zhang,Chunnian He,Chunsheng Shi,Biao Chen,Liying Ma,Enzuo Liu,Junwei Sha,Zhou fengxin,Naiqin Zhao

DOI: https://doi.org/10.1039/d4cc02324b

IF: 4.9

2024-07-20

Chemical Communications

Abstract:Serious safety risk is inevitable for the practical application of lithium metal batteries (LMBs) due to the uncontrolled growth of lithium dendrites. To inhibit the formation of lithium dendrites, many researchers have focused on constructing three-dimensional porous current collectors with high specific surface area. Nevertheless, the homogeneous structure of the porous collectors does not effectively guide the deposition of lithium metal to the bottom, leading to a phenomenon known as "top-growth." Recently, the construction of 3D porous current collectors with lithiophilic gradient has been widely reported and regarded as an effective approach to inhibiting lithium "top-growth." and thus improving battery safety. In this review, we summarized the latest research progress of such anode current collector design strategies, including surface modification of different base materials, design of gradient structure, and field factors, especially emphasizing their lithium-affinity mechanism as well as the advantages and disadvantages of different collector designs. Finally, we provide a perspective on the future research directions and applications of gradient affinity current collectors.

chemistry, multidisciplinary
Recent Development in Lithium Metal Anodes of Liquid-State Rechargeable Batteries

S.F. Liu,X.L. Wang,D. Xie,X.H. Xia,C.D. Gu,J.B. Wu,J.P. Tu

DOI: https://doi.org/10.1016/j.jallcom.2017.09.204

IF: 6.2

2018-01-01

Journal of Alloys and Compounds

Abstract:Lithium metal has always been considered as a “Holy Grail” of anode materials for high-energy-density batteries owing to its extremely high theoretical gravimetric capacity of 3860 mAh g−1 and the lowest electrochemical potential of −3.04 V. Unfortunately, huge challenges including unlimited dendrite growth and complex interfacial reaction accompanied with relatively low Coulombic efficiency have extremely restricted its practical applications for decades. In this review, we discuss recently exciting achievements in modifying Li metal anodes, particularly regarding porous structure design, surface modification, heterogeneous seed strategy, potential substitutes including Li powder, and pre-lithiated composite. Although each improvement method has its own advantage, we believe appropriate combination of them will yield more promising results. Finally, we discuss core issues and potential opportunities of Li metal anode, expecting to shed new light on future research in this field.
Advanced Current Collectors for Alkali Metal Anodes

Jianyu Chen,Xin Xu,Qian He,Yanwen Ma

DOI: https://doi.org/10.1007/s40242-020-0098-y

IF: 3.1

2020-01-01

Chemical Research in Chinese Universities

Abstract:High-energy-density batteries are in urgent need to solve the ever-increasing energy storage demand for portable electronic devices, electric vehicles, and renewable solar and wind energy systems. Alkali metals, typically lithium(Li), sodium(Na) and potassium(K), are considered as the promising anode materials owing to their low electrochemical potential, low density, and high theoretical gravimetric capacities. However, the problem of dendrite growth of alkali metals during their plating/stripping process will lead to low Coulombic efficiencies, a short lifespan and huge volume expansion, eventually hindering their practical commercialization. To resolve this issue, a very effective approach is engineering the anodes on structured current collectors. This review summarizes the development of the alkali metal batteries and discusses the recent advances in rational design of anode current collectors. First, the challenges and strategies of suppressing alkali-metal dendrite growth are presented. Then the special attention is paid to the novel current collector design for dendrite-free alkali metal anodes. Finally, we give conclusions and perspective on the current challenges and future research directions toward advanced anode current collectors for alkali metal batteries.
Application and research of current collector for lithium-sulfur battery

Wenhao Yang,Rongwei Huang,Zhicong Ni,Hongyu Cheng,Siyuan Zhou,Yanjie Wang,Xue Li,Yiyong Zhang,Yingjie Zhang

DOI: https://doi.org/10.1007/s11581-022-04461-2

IF: 2.961

2022-01-24

Ionics

Abstract:With the increasing demand for high-performance batteries, lithium-sulfur battery has become a candidate for a new generation of high-performance batteries because of its high theoretical capacity (1675 mAh g−1) and energy density (2600 Wh kg−1). However, due to the rapid decline of capacity and poor cycle and rate performance, the battery is far from ideal in practical commercial application. In recent years, remarkable results have been achieved in alleviating these problems through the research and development of battery devices, including cathode, anode, binder, diaphragm, electrolyte, and current collector. Judging from the articles published in recent years, there are many researches on current collector of lithium-sulfur battery, but there are few reviews. Therefore, in this paper, the latest progress of current collector in lithium-sulfur battery is systematically reviewed, including basic requirements of current collector for lithium-sulfur battery, carbon-based current collector, metal-based current collector, compound current collector. Finally, the future prospect of current collector in lithium-sulfur battery is discussed.

chemistry, physical,physics, condensed matter,electrochemistry
Fabrication and Application of Porous Current Collector for Lithium Ion Batteries

Zheng LUO,Jiege LIANG,Bin YUAN

2018-01-01

Abstract:Metal-based anodes are the ideal anode materials for the next generation lithium ion batteries because of their ultra-high theoretical capacity.However,metal-based anodes suffer from huge volume expansion during cycling,which would lead to the pulverization and peeling of the electrodes.Adopting porous current collector is thought to be an effective way to accommodate the volume expansion of metal anode materials because it can greatly improve the cycling performance and energy density of lithium ion batteries by making full use of the pores and the high specific surface area.In this paper,the preparation of micro-porous,nano-po-rous or bimodal porous current collectors and its applications in lithium ion batteries are summarized.
Lithium Metal Anode: Past, Present, and Future

Wen‐Ze Huang,Pan Xu,Xue‐Yan Huang,Chen‐Zi Zhao,Xiaofei Bie,Hao Zhang,Aibing Chen,Elena Kuzmina,Elena Karaseva,Vladimir Kolosnitsyn,Ximin Zhai,Tao Jiang,Li‐Zhen Fan,Deping Wang,Qiang Zhang

DOI: https://doi.org/10.1002/metm.6

2023-01-01

Abstract:AbstractOver the past three decades, lithium‐based batteries have greatly influenced our daily lives. However, their limited energy density poses challenges in meeting growing demand. To increase energy density, lithium metal anode is considered critical. This review systematically examines the history of lithium metal anode development, highlights notable advances in fundamental understandings, materials design, and characterization techniques. Forthcoming opportunities are discussed to promote the practical applications of lithium metal anodes.
Recent Advances in Research on Anodes for Safe and Efficient Lithium–metal Batteries

Jifang Zhang,Yipeng Su,Yuegang Zhang

DOI: https://doi.org/10.1039/d0nr03833d

IF: 6.7

2020-01-01

Nanoscale

Abstract:The revival of lithium metal anodes (LMAs) makes it a potent influence on the battery research community in the recent years after the popularity of Li-ion batteries with graphite anodes. The main reason is due to the over ten-fold increase in the capacity of LMAs when compared with that obtained when using graphite, as well as the low redox potential of Li/Li+. However, the full potential of LMAs is heavily inhibited by several factors, such as dendrite growth, pulverization, side reactions, and volume changes. These adversities lower the cell's Coulombic efficiency dramatically if operated without massively excessive Li usage. In this review, we first introduce some of the most significant progresses made in the understandings of the charging/discharging processes at the anode. The importance of combining advanced characterization techniques with classical methods is highlighted. In particular, we aim to explore the hidden links between those studies for obtaining deeper insights. Two main categories of solutions to address common problems, namely, lithium-electrolyte interfacial engineering and three-dimensional hosting of Li, are subsequently illustrated, where each subsection takes a different methodological perspective to demonstrate the relevant state-of-the-art studies. Some interesting approaches to stop dendrites and a brief note on the practical aspects of lithium-metal batteries are provided, too. This review concludes with our essential discoveries from the current literature and valuable suggestions for future LMA research.
Advanced 3D Current Collectors for Dendrite-free Lithium Metal Anode

Li Tong,Gu Sichen,Lin Qiaowei,Han Junwei,Zhou Guangmin,Li Baohua,Kang Feiyu,Lyu Wei

DOI: https://doi.org/10.7503/cjcu20200678

2021-01-01

Abstract:Nowadays, with the rapid development of electrochemical energy storage market, the present commercial lithium ion batteries cannot meet the growing demand for energy storage devices with higher energy density. Metallic lithium is strongly regarded as the most promising anode candidate for next-generation highenergy-density batteries, due to its superior theoretical capacity and low electrochemical potential. However, there are still several determent issues to be addressed during charging and discharging, including huge volume change,lithium dendrite growth and unstable interface, which seriously hinder its practical application in secondary batteries. Three-dimensional(3D)porous matrixes are considered as ideal current collectors to realize a uniform Li nucleation and dendrite-free Li plating as well as to overcome volume expansion simultaneously. 3D current collectors possess spacial framework,large surface area,abundant pores and high mechanical properties, which enable a lower local current density,uniform electric field distribution and reduced concentration gradient for lithium anode during Li plating/stripping. Although many research papers related to 3D current collectors have been published recently, few comprehensive and systemic evaluation was revealed on the currently various 3D current collector systems. This review focuses on the research progress referring to structure design and practical application of 3D current collectors in lithium anode. Firstly,an analysis about the principle and limitation of lithium dendrite suppression by 3D current collector is provided. Secondly,we pay close attention to strategies for controllable construction, surface modification and functionality of a 3D structure and resulting improvement of Li deposition. A comparison among various 3D hosts based on different materials is summarized, in terms of advantages and shortages. Finally,perspectives of the future research based on the practical application in this field are discussed.
Novel Current Collector for High Energy Density Lithium-Metal Batteries

Mintao Wan,Haowen Liu,Nae-Lih Wu,Stefano Passerini,Dominic Bresser,Nae-Lih (Nick) Wu

DOI: https://doi.org/10.1149/ma2023-024642mtgabs

2023-12-22

ECS Meeting Abstracts

Abstract:The energy density of lithium-metal batteries (LMBs) relies to a substantial fraction on the thickness of the lithium-metal anode. 1,2 Additionally, the commonly used copper current collector adds a significant mass to the electrode weight (e.g., 77% when considering a 50 μm thick lithium and 10 μm thick copper), but the thinner the lithium foil, the more important becomes the current collector to provide suitable mechanical properties and ensure a good electronic contact across the whole negative electrode. Herein, we report the design of a novel current collector (patent application pending) that enables a substantial reduction in mass, while providing high electronic conductivity and suitable mechanical properties. Moreover, LMBs with a thin lithium foil and a Ni-rich NMC cathode comprising such new current collector reveal a superior performance compared to those containing a standard copper foil. References 1 Liu, J. et al. Pathways for practical high-energy long-cycling lithium metal batteries. Nat. Energy 4 , 180-186, (2019). 2 Niu, C. et al. Balancing interfacial reactions to achieve long cycle life in high-energy lithium metal batteries. Nat. Energy , 6 , 723–732, (2021).
Study of Current Collectors for Li-ion Batteries

NI Jiang-Feng,ZHOU Heng-Hui,CHEN Ji-Tao,ZHANG Xin-Xiang

DOI: https://doi.org/10.3969/j.issn.1001-1579.2005.02.021

2005-01-01

Abstract:The electrochemical characters of Cu and Al as Li-ion battery current collectors were studied. Their charge-discharge performance and polarization curves of the Cu and Al current collectors were studied by constant current test and linear sweep voltammetry. The results indicated when Cu and Al were used as anode and cathode current collectors respectively, they both (exhibited) the properties of low lithium intercalating capacity, high electrochemical stability and decreasing the electrode polarization.
A Corrosion-Resistant Current Collector for Lithium Metal Anodes

Xinyue Zhang,Aoxuan Wang,Ruijing Lv,Jiayan Luo

DOI: https://doi.org/10.1016/j.ensm.2018.09.017

IF: 20.4

2019-01-01

Energy Storage Materials

Abstract:Due to its high theoretical specific capacity and negative electrochemical potential, Li is considered to be the ultimate choice for the battery anode. Unfortunately, poor Coulombic efficiency and uncontrolled dendrite growth prevent it from practical application. Electrolyte additives can effectively stabilize the solid electrolyte interphase (SEI) while utilizing various nanostructured forms of current collectors can decrease the current density and alleviate the volume fluctuation. Combining these two strategies could potentially lead to high performance Li metal anodes (LMAs). However, we found that Cu, the widely used anode current collector for lithium metal batteries, suffers corrosion in polysulfides containing electrolyte, which are proved to effectively protect the surface of Li anode in the study of Li-S batteries. Such corrosion could collapse the structure of LMAs. To mitigate the incompatibility of electrolyte additives and current collectors, we propose here a lightweight 3D Ti current collector that is corrosion-resistant in electrolyte with polysulfide additive. Outstanding Coulombic efficiency over 99% was achieved under high plating/stripping capacity of 5 mAh cm(-2) and no dendrite was observed. This work not only demonstrates an exceptional lightweight 3D current collector but also highlights the importance of the corrosion-resistance capability of the current collectors for LMAs.
Optimizing Current Collector Interfaces for Efficient “Anode‐Free” Lithium Metal Batteries

Palanivel Molaiyan,Mozaffar Abdollahifar,Buket Boz,Alexander Beutl,Martin Krammer,Ningxin Zhang,Artur Tron,Martina Romio,Marco Ricci,Rainer Adelung,Arno Kwade,Ulla Lassi,Andrea Paolella

DOI: https://doi.org/10.1002/adfm.202311301

IF: 19

2023-10-27

Advanced Functional Materials

Abstract:Abstract Current lithium (Li)‐metal anodes are not sustainable for the mass production of future energy storage devices because they are inherently unsafe, expensive, and environmentally unfriendly. The anode‐free concept, in which a current collector (CC) is directly used as the host to plate Li‐metal, by using only the Li content coming from the positive electrode, could unlock the development of highly energy‐dense and low‐cost rechargeable batteries. Unfortunately, dead Li‐metal forms during cycling, leading to a progressive and fast capacity loss. Therefore, the optimization of the CC/electrolyte interface and modifications of CC designs are key to producing highly efficient anode‐free batteries with liquid and solid‐state electrolytes. Lithiophilicity and electronic conductivity must be tuned to optimize the plating process of Li‐metal. This review summarizes the recent progress and key findings in the CC design (e.g. 3D structures) and its interaction with electrolytes.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

Recent developments in current collectors for lithium metal anodes

Research Progress in Cathode and Anode Materials of Li-ion Battery

Advancements in Current Collectors for Composite Lithium Metal Anodes

Research Progress on Copper-Based Current Collector for Lithium Metal Batteries

Advanced 3D Current Collectors for Lithium-Based Batteries

Structural Design of 3D Current Collectors for Lithium Metal Anodes: A Review

Advanced Current Collector Materials for High‐Performance Lithium Metal Anodes

Copper Current Collector: The Cornerstones of Practical Lithium Metal and Anode-Free Batteries

A review on structuralized current collectors for high-performance lithium-ion battery anodes

Advances in anode current collectors with lithiophilic gradient for lithium metal battery

Recent Development in Lithium Metal Anodes of Liquid-State Rechargeable Batteries

Advanced Current Collectors for Alkali Metal Anodes

Application and research of current collector for lithium-sulfur battery

Fabrication and Application of Porous Current Collector for Lithium Ion Batteries

Lithium Metal Anode: Past, Present, and Future

Recent Advances in Research on Anodes for Safe and Efficient Lithium–metal Batteries

Advanced 3D Current Collectors for Dendrite-free Lithium Metal Anode

Novel Current Collector for High Energy Density Lithium-Metal Batteries

Study of Current Collectors for Li-ion Batteries

A Corrosion-Resistant Current Collector for Lithium Metal Anodes

Optimizing Current Collector Interfaces for Efficient “Anode‐Free” Lithium Metal Batteries