Abstract:Interface engineering has been recognized as a very effective method to simultaneously improve both efficiency and stability in perovskite solar cells (PSCs). In this work, we report using an excellent small molecular material tetraphenyldibenzoperiflanthene (DBP) to modify the perovskite/Spiro-OMeTAD interface to achieve significantly improved solar cell performance. It is found that the ultrathin DBP interlayer accelerates hole transfer across the FAxMA1–xPbInBr3–n/Spiro-OMeTAD interface and effectively reduces the nonradiative recombination. The Kelvin probe force microscopy and energy band analyses reveal that the DBP modification helps build better matched energy level alignment and smaller energy loss for more fluent hole transport. Consequently, the DBP-treated PSCs achieve an enhanced open-circuit voltage as high as 1.184 V and fill factor as high as 78.2% as well as the negligible hysteresis. The champion PSC made with DBP gives a PCE of 21.49%, significantly increased compared to 19.68% from the reference cell without the modification. Moreover, DBP also serves as a water-resistant protection for improved moisture stability. The PCE of the DBP-treated cells without encapsulation remains more than 84% of its initial efficiency, which is significantly higher than that of the reference PSCs (65%) after 20 days of storage under an air environment with 50–65% humidity. This study provides an effective interface modification material to address notorious stability problems in Spiro-OMeTAD-based PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12544?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12544</a>.SEM images of the perovskite film treated by different concentrations of DBP; UV–vis spectra of the pristine and DBP-treated perovskite films; XRD patterns of the pristine and DBP-treated perovskite films; time-resolved PL spectra of different kinds of the perovskite films; and further information on device performance, J–V hysteresis, and stability (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12544/suppl_file/am0c12544_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Interface induced in-situ vertical phase separation from MAPbI3:Spiro-OMeTAD precursors for perovskite solar cells

Ion-Migration Inhibitor for Spiro-OMeTAD/Perovskite Contact Toward Stable Perovskite Solar Cells

In Situ Interface Engineering with a Spiro‐OMeTAD/CoO Hierarchical Structure via One‐Step Spin‐Coating for Efficient and Stable Perovskite Solar Cells

Simultaneous Interface Amelioration and Energy Level Modulation Using In Situ Polymerized Molecules for Efficient and Stable Perovskite Solar Cells

In Situ Combined‐Hole Transport Layer for Highly Efficient Perovskite Solar Cells

Interface optimization and growth control for high efficiency wide bandgap perovskite solar cells

Poly(3‐hexylthiophene)/perovskite Heterointerface by Spinodal Decomposition Enabling Efficient and Stable Perovskite Solar Cells

2D PEA 2 PbI 4 –3D MAPbI 3 Composite Perovskite Interfacial Layer for Highly Efficient and Stable Mixed-Ion Perovskite Solar Cells

Interface and Grain Boundary Passivation by PEA-SCN Double Ions via One-Step Crystal Engineering for All Air-Processed, Stable Perovskite Solar Cells

Intermediate phase engineering towards efficient and stable perovskite solar cells: Principles and strategies

Pressure-Assisted Space-Confinement Strategy to Eliminate PbI 2 in Perovskite Layers toward Improved Operational Stability

Sequential Molecule‐Doped Hole Conductor to Achieve >23% Perovskite Solar Cells with 3000‐hour Operational Stability

Synchronous Elimination of Excess Photoinstable PbI2 and Interfacial Band Mismatch for Efficient and Stable Perovskite Solar Cells

Water-Soluble Polymeric Interfacial Material for Planar Perovskite Solar Cells.

Interface Modification for Efficient and Stable Inverted Inorganic Perovskite Solar Cells

Additive engineering on spiro-OMeTAD hole transport material for CsPbI3 all-inorganic perovskite solar cells with improved performance and stability

Mechanochemical synthesis of pure phase mixed-cation/anion (FAPbI<sub>3</sub>)<sub><i>x</i></sub>(MAPbBr<sub>3</sub>)<sub>1-<i>x</i ></sub> hybrid perovskite materials: compositional engineering and photovoltaic performance

Vertical Phase Separated Cesium Fluoride Doping Organic Electron Transport Layer: A Facile and Efficient “bridge” Linked Heterojunction for Perovskite Solar Cells

Molecularly Tailored Perovskite/Poly(3-hexylthiophene) Interfaces for High-performance Solar Cells

In Situ Polymerizing Internal Encapsulation Strategy Enables Stable Perovskite Solar Cells toward Lead Leakage Suppression

Interface Modification of a Perovskite/Hole Transport Layer with Tetraphenyldibenzoperiflanthene for Highly Efficient and Stable Solar Cells