Blocking sets in PG(2, qn) from cones of PG(2n, q)

F. Mazzocca,O. Polverino

DOI: https://doi.org/10.1007/S10801-006-9102-Y

2006-08-01

Abstract:

What problem does this paper attempt to address?

Tailoring of arteriovenous graft-to-vein anastomosis angle to attenuate pathological flow fields

Dillon Williams,Eric C Leuthardt,Guy M Genin,Mohamed Zayed

DOI: https://doi.org/10.1038/s41598-021-90813-3

2021-06-09

Abstract:Arteriovenous grafts are routinely placed to facilitate hemodialysis in patients with end stage renal disease. These grafts are conduits between higher pressure arteries and lower pressure veins. The connection on the vein end of the graft, known as the graft-to-vein anastomosis, fails frequently and chronically due to high rates of stenosis and thrombosis. These failures are widely believed to be associated with pathologically high and low flow shear strain rates at the graft-to-vein anastomosis. We hypothesized that consistent with pipe flow dynamics and prior work exploring vein-to-artery anastomosis angles in arteriovenous fistulas, altering the graft-to-vein anastomosis angle can reduce the incidence of pathological shear rate fields. We tested this via computational fluid dynamic simulations of idealized arteriovenous grafts, using the Bird-Carreau constitutive law for blood. We observed that low graft-to-vein anastomosis angles ([Formula: see text]) led to increased incidence of pathologically low shear rates, and that high graft-to-vein anastomosis angles ([Formula: see text]) led to increased incidence of pathologically high shear rates. Optimizations predicted that an intermediate ([Formula: see text]) graft-to-anastomosis angle was optimal. Our study demonstrates that graft-to-vein anastomosis angles can significantly impact pathological flow fields, and can be optimized to substantially improve arteriovenous graft patency rates.
Transitional Flow in the Venous Side of Patient-Specific Arteriovenous Fistulae for Hemodialysis

Michela Bozzetto,Bogdan Ene-Iordache,Andrea Remuzzi

DOI: https://doi.org/10.1007/s10439-015-1525-y

IF: 3.8

2015-12-23

Annals of Biomedical Engineering

Abstract:Arteriovenous fistula (AVF) is the first choice for providing vascular access for hemodialysis patients, but maintaining its patency is challenging. AVF failure is primarily due to development of neointimal hyperplasia (NH) and subsequent stenosis. Using idealized models of AVF we previously suggested that reciprocating hemodynamic wall shear is implicated in vessel stenosis. The aim of the present study was to investigate local hemodynamics in patient-specific side-to-end AVF. We reconstructed realistic geometrical models of four AVFs from magnetic resonance images acquired in a previous clinical study. High-resolution computational fluid dynamics simulations using patient-specific blood rheology and flow boundary conditions were performed. We then characterized the flow field and categorized disturbed flow areas by means of established hemodynamic wall parameters. In all AVF, either in upper or lower arm location, we consistently observed transitional laminar to turbulent-like flow developing in the juxta-anastomotic vein and damping towards the venous outflow, but not in the proximal artery. High-frequency fluctuations of the velocity vectors in these areas result in eddies that induce similar oscillations of wall shear stress vector. This condition may importantly impair the physiological response of endothelial cells to blood flow and be responsible for NH formation in newly created AVF.

engineering, biomedical
Complex formation of sericoside with hydrophilic cyclodextrins: improvement of solubility and skin penetration in topical emulsion based formulations.

T. Rode,M. Frauen,Bernd W. Müller,H. Düsing,U. Schönrock,Claudia Mundt,Horst Wenck

DOI: https://doi.org/10.1016/S0939-6411(02)00194-7

IF: 5.589

2003-03-01

European Journal of Pharmaceutics and Biopharmaceutics

Abstract:
The Outcome of the Proximal Radial Artery Arteriovenous Fistula.

Cong,Hua Jiang,Jun Cheng,Ling Fei Zhao,Kai Xiang Sheng,Jiang Hua Chen

DOI: https://doi.org/10.1016/j.jvs.2014.08.112

IF: 4.86

2015-01-01

Journal of Vascular Surgery

Abstract:Background: Guidelines recommend placing native arteriovenous fistulas (AVFs) as far distally in the upper extremity as possible. If there are adequate veins and adequate arteries, a wrist fistula, which offers notably lower risks than grafts and catheters, would be the first choice for long-term hemodialysis. With increasing failure and difficulty to create wrist fistulas, we reviewed outcomes of the proximal radial AVF (PRAAVF) and demonstrate that it is an effective technique. Methods: A systemic literature research was conducted in PubMed and related bibliographies. The focus of data extraction was primary failure, primary patency rates, and secondary patency rates after 1 and 2 years. Estimates were pooled with the random effects model, and meta-regression and sensitivity analysis were performed to explore heterogeneity. Results: According to selection criteria formulated a priori, 10 articles (n [ 1310) were included and finally analyzed after screening 1687 articles. The pooled primary failure was 12.3% (95% confidence interval [ CI], 7.6%-17.0%; chi(2) = 70.8, I-2 = 87.3%), the primary patency, including primary failure, was 73.6% (95% CI, 52.4%-94.9%; chi(2) = 71.3, I-2 = 97.2%) at 1 year and 70.5% (95% CI, 50.6%-90.5%; chi(2) = 58.8, I-2 = 96.6%) at 2 years. Secondary patency was 80.0% (95% CI, 72.8%-87.2%; chi(2) = 24.42, I-2 = 75.4%) at 1 year and 73.7% (95% CI, 65.2%-82.2%; chi(2) = 28.51, I-2 = 79.0%) at 2 years. Individual variate meta-regression analysis found the definition of primary failure was a significant source of heterogeneity (P = .009). Steal syndromes developed in four of 832 (0.5%) of the PRAAVFs, and venous hypertension developed in four of 284 (1.4%). Conclusions: The PRAAVF presented low to moderate primary failure and high primary and secondary patency rates with acceptable complications. Consideration of the specific fistula is required when creating a vascular access, especially when a wrist fistula has failed or is predicted to be unsuccessful.
Functional analysis of arteriovenous fistulae in non-contrast magnetic resonance images

José A. Rosado-Toro,Rohit C. Philip,Samuel Thomas Dunn,Diego Celdran-Bonafonte,Yong He,Scott A Berceli,Prabir Roy-Chaudhury,Eleonora Tubaldi,Samuel Thomas Dunn,Diego Celdran-Bonafonte,Yong He,Scott A Berceli,Prabir Roy-Chaudhury,Eleonora Tubaldi

DOI: https://doi.org/10.1016/j.cmpb.2022.106938

IF: 6.1

2022-07-01

Computer Methods and Programs in Biomedicine

Abstract:Background and ObjectiveArteriovenous fistulae (AVF) are the preferred mode of hemodialysis vascular access and their successful maturation is critical to reduce patient morbidity, mortality, cost, and improve quality of life. Peri-anastomotic venous segment stenosis is the primary cause of AVF maturation failure. The objective is to develop a software protocol for the functional analysis of arteriovenous fistula.MethodWe have developed a standard protocol for the anatomical analysis of the AVF to better understand the mechanisms involved in AVF stenosis and to identify future imaging biomarkers for AVF success or failure using non-contrast magnetic resonance imaging (MRI). The 3D model of the AVF is created using a polar dynamic programming technique. Analysis has been performed on six Yorkshire cross domestic swine, but techniques can be applied into clinical settings.ResultsDifferences in AVF angles and vein curvature are associated with significant variability of venous cross-sectional area. This suggests that the pattern of stenosis is likely to be dependent upon hemodynamic profiles which are largely determined by AVF anatomical features and could play an important role in AVF maturation.ConclusionsThis protocol enables us to visualize and study the hemodynamic profiles indirectly allowing early stratification of patients into high and low risk groups for AVF maturation failure. High risk patients could then be targeted with an enhanced process of care or future maturation enhancing therapies resulting in a much-needed precision-medicine approach to dialysis vascular access.

engineering, biomedical,computer science, interdisciplinary applications,medical informatics, theory & methods
High fidelity blood flow in a patient-specific arteriovenous fistula

J. W. S. McCullough,P. V. Coveney

DOI: https://doi.org/10.1038/s41598-021-01435-8

IF: 4.6

2021-11-16

Scientific Reports

Abstract:Abstract An arteriovenous fistula, created by artificially connecting segments of a patient’s vasculature, is the preferred way to gain access to the bloodstream for kidney dialysis. The increasing power and availability of supercomputing infrastructure means that it is becoming more realistic to use simulations to help identify the best type and location of a fistula for a specific patient. We describe a 3D fistula model that uses the lattice Boltzmann method to simultaneously resolve blood flow in patient-specific arteries and veins. The simulations conducted here, comprising vasculatures of the whole forearm, demonstrate qualified validation against clinical data. Ongoing research to further encompass complex biophysics on realistic time scales will permit the use of human-scale physiological models for basic and clinical medicine.

multidisciplinary sciences
The Anastomotic Angle of Hemodialysis Arteriovenous Fistula Is Associated With Flow Disturbance at the Venous Stenosis Location on Angiography

Chih-Yu Yang,Ming-Chia Li,Chien-Wen Lan,Wang-Jiun Lee,Chen-Ju Lee,Cheng-Hsueh Wu,Jing-Min Tang,Yang-Yao Niu,Yao-Ping Lin,Yan-Ting Shiu,Alfred K. Cheung,Yan-Hwa Wu Lee,Oscar Kuang-Sheng Lee,Shu Chien,Der-Cherng Tarng

DOI: https://doi.org/10.3389/fbioe.2020.00846

IF: 5.7

2020-07-23

Frontiers in Bioengineering and Biotechnology

Abstract:The juxta-anastomotic stenosis of an arteriovenous fistula (AVF) is a significant clinical problem in hemodialysis patients with no effective treatment. Previous studies of AV anastomotic angles on hemodynamics and vascular wall injury were based on computational fluid dynamics (CFD) simulations using standardized AVF geometry, not the real-world patient images. The present study is the first CFD study to use angiographic images with patient-specific outcome information, i.e., the exact location of the AVF stenotic lesion. We conducted the CFD analysis utilizing patient-specific AVF geometric models to investigate hemodynamic parameters at different locations of an AVF, and the association between hemodynamic parameters and the anastomotic angle, particularly at the stenotic location. We analyzed 27 patients who used radio-cephalic AVF for hemodialysis and received an angiographic examination for juxta-anastomotic stenosis. The three-dimensional geometrical model of each patient's AVF was built using the angiographic images, in which the shape and the anastomotic angle of the AVF were depicted. CFD simulations of AVF hemodynamics were conducted to obtain blood flow parameters at different locations of an AVF. We found that at the location of the stenotic lesion, the AV angle was significantly correlated with access flow disturbance (r = 0.739; p < 0.001) and flow velocity (r = 0.563; p = 0.002). Furthermore, the receiver operating characteristic (ROC) curve analysis revealed that the AV angle determines the lesion's flow disturbance with a high area under the curve value of 0.878. The ROC analysis also identified a cut-off value of the AV angle as 46.5°, above or below which the access flow disturbance was significantly different. By applying CFD analysis to real-world patient images, the present study provides evidence that an anastomotic angle wider than 46.5° might lead to disturbed flow generation, demonstrating a reference angle to adopt during the anastomosis surgery.

multidisciplinary sciences
Tomographic PIV analysis of physiological flow conditions in a patient-specific arteriovenous fistula

Sanjiv Gunasekera,Olivia Ng,Shannon Thomas,Ramon Varcoe,Charitha de Silva,Tracie Barber

DOI: https://doi.org/10.1007/s00348-020-03085-4

IF: 2.797

2020-11-18

Experiments in Fluids

Abstract:The arteriovenous fistula (AVF), which is a vasculature created for end-stage renal disease patients who require haemodialysis, is susceptible to many vascular diseases. It is well known that disturbed hemodynamics is a factor in the initiation of vascular disease; however, only a limited number of experimental studies have been conducted to assess the flow behaviour within the AVF. The current study is an investigation of the complex three-dimensional flow within a physiological AVF geometry, using tomographic particle image velocimetry. To this end, a benchtop model of a patient-specific geometry was created by casting silicone around a soluble 3D print of the vessels. The patient-specific boundary conditions were reproduced by driving a refractive-index matched working fluid from a pulsatile pump, which was connected to the model via a tubing network inclusive of valves and compliance chambers. The seeded working fluid was illuminated with a 1 kHz double-pulsed laser, and four high-speed cameras placed at optimised locations were used to capture the particle images, with the volume reconstructions refined by a 3D internal mask created using morphological operations. The velocity magnitude contour plots of the resulting vector field revealed two zones of low velocity in the anastomosis, while locations of high turbulent kinetic energy are observed in the anastomosis and venous regions. These results suggested that the collision of the two opposing inlet flows and the curvature at the anastomosis cause disturbance in the flow that is carried downstream.

engineering, mechanical,mechanics
Patient-specific hemodynamic markers co-localise with regions of neointimal hyperplasia in an arteriovenous graft

Federica Ninno,Catriona Stokes,Edouard Aboian,Alan Dardik,David Strosberg,Stavroula Balabani,Vanessa Diaz

DOI: https://doi.org/10.1101/2024.12.05.24318387

2024-12-08

Abstract:Purpose. Most computational fluid dynamics (CFD) studies on arteriovenous grafts (AVGs) adopt idealised geometries and simplified boundary conditions (BCs), potentially resulting in misleading conclusions when attempting to predict neointimal hyperplasia (NIH) development. Moreover, they often analyse a limited range of hemodynamic indices, lack validation, and fail to link the graft-altered hemodynamics with follow-up data. This study develops a novel patient-specific CFD workflow for AVGs using pathophysiological BCs. It validates the CFD results with patient medical data and assesses the co-localisation between CFD results and NIH regions at follow-up. Methods. Contrast-enhanced computed tomography angiography images were used to segment the patient-specific AVG geometry. A uniform Doppler ultrasound (DUS)-derived velocity profile was imposed at the inlet, and three-element Windkessel models were applied at the arterial outlets of the domain. Transient, rigid-wall simulations were performed using the k-omega SST turbulence model. The CFD-derived flow waveform was compared with the DUS image of the patient to ensure validation. Turbulent kinetic energy (TKE), helicity and near-wall hemodynamic descriptors were calculated and linked with regions presenting NIH from a 4-month follow-up fistulogram. Results. In the analysed patient, areas presenting high TKE and balanced helical flow structures at baseline exhibit NIH growth at follow-up. Transverse wall shear stress index is a stronger predictor of NIH than other commonly analysed near-wall hemodynamic indices, since luminal areas subjected to high values greatly co-localise with observed areas of remodelling. Conclusion. This patient-specific computational workflow for AVGs could be applied to a larger cohort to unravel the link between altered hemodynamics and NIH progression in vascular access.
The management of high flow arteriovenous fistula and possible solutions

Fabrizio Cristiano,Massimo Lodi

DOI: https://doi.org/10.1177/11297298241287946

2024-10-25

The Journal of Vascular Access

Abstract:The Journal of Vascular Access, Ahead of Print. Background:The development of a high flow rate arteriovenous fistula (AVF) can expose the patient to development of heart failure due to increased cardiac preload and pulmonary hypertension.Objectives:AVF flow measurement (Qa) is considered a screening tool for AVF surveillance, aiming to evaluate the access dysfunction and prevent complications, like a non-maturation, suspected stenosis, high-flow AVF, and distal ischemia. In the upper arm AVF, a high Qa may develops, which can expose the patient to the risk of high-output heart failure and ischemia. Although, the exact threshold to define high-flow access is not universally accepted, AVF with a Qa of 1–1.5 L/min or cardio-pulmonary recirculation (Qa/CO) >20% are considered at risk.Subjects:In our work we describe the treatment performed in three patients with high flow AVF treated with DRIL technique with interposition of a Prosthetic Patch, revascularization procedures such as distal inflow revision or RUDI and with innovative technique a "tench snout," removal the previous anastomosis and reconstruction of the integrity of the radial artery at the terminal in pre and post anastomosis. A PTFE prosthetic segment measuring 5 cm in length and 5 mm in diameter was interposed, terminally anastomosed with the efferent cephalic vein and terminally lateral with the radial artery, reducing the anastomosis to approximately 4 mm.Results:All treated patients showed a clear improvement in the clinical picture in particularly heart failure. The calculation of the post-intervention flow rate approximately 1500 mL/min.Conclusion:The patient on hemodialysis with arteriovenous fistula must be constantly monitored with clinical examination, monitoring during the hemodialysis session and color Doppler ultrasound of the AVF with calculation of the flow rate. The surgical technique used for flow reduction is chosen on the surgical experience of each operator with the main objective of preserving the autologous AVF.

peripheral vascular disease
Tailoring Left Ventricular Assist Device Cannula Implantation Using Coupled Multi-Scale Multi-Objective Optimization

Abubakar Dankano,Ray Prather,Blake Lozinski,Eduardo Divo,Alain Kassab,William DeCampli

DOI: https://doi.org/10.1016/j.medengphy.2024.104124

IF: 2.356

2024-02-18

Medical Engineering & Physics

Abstract:Background : The frequent occurrence of thromboembolic cerebral events continues to limit the widespread implementation of Ventricular Assist Devices (VAD) despite continued advancements in VAD design and anti-coagulation treatments. Recent studies point to the optimal positioning of the outflow graft (OG) as a potential mitigator of post implantation thromboembolism. Objective : This study aims to examine the tailoring of the OG implantation orientation with the goal of minimizing the number of thrombi reaching the cerebral vessels by means of a formal shape optimization scheme incorporated into a multi-scale hemodynamics analysis. Methods : A 3-D patient-specific computational fluid dynamics model is loosely coupled in a two-way manner to a 0-D lumped parameter model of the peripheral circulation. A Lagrangian particle-tracking scheme models and tracks thrombi as non-interacting solid spheres. The loose coupling between CFD and LPM is integrated into a geometric shape optimization scheme which aims to optimize an objective function that targets a drop in cerebral embolization, and an overall reduction in particle residence times. Results : The results elucidate the importance of OG anastomosis orientation and placement particularly in the case that studied particle release from the OG, as a fivefold decrease in cerebral embolization was observed between the optimal and non-optimal implantations. Another case considered particle release from the ventricle and aortic root walls, in which optimal implantation was achieved with a shallow insertion angle. Particle release from all three origins was investigated in the third case, demonstrating that the optimal configurations were generally characterized by VAD flow directed along the central lumen of the aortic arch. Because optimal configurations depended on the anatomic origin of the thrombus, it is important to determine, in clinical studies, the most likely sites of thrombus formation in VAD patients.

engineering, biomedical
Differential hemodynamics between arteriovenous fistulas with or without intervention before successful use

Hannah Northrup,Yong He,Ha Le,Scott A. Berceli,Alfred K. Cheung,Yan-Ting Shiu

DOI: https://doi.org/10.3389/fcvm.2022.1001267

IF: 3.6

2022-11-03

Frontiers in Cardiovascular Medicine

Abstract:A significant number of arteriovenous fistulas (AVFs) fail to maturate for dialysis. Although interventions promote maturation, functional primary patency loss is higher for AVFs with interventions (assisted maturation) than AVFs without interventions (un-assisted maturation). Although blood flow-associated hemodynamics have long been proposed to affect AVF remodeling, the optimal hemodynamic parameters for un-assisted maturation are unclear. Additionally, AVF maturation progress is generally not investigated until 6 weeks after AVF creation, and the examination is focused on the AVF’s venous limb. In this exploratory study, patients ( n = 6) underwent magnetic resonance imaging (MRI) at 1 day, 6 weeks, and 6 months after AVF creation surgery. Before successful use for hemodialysis, three AVFs required intervention and three did not. MRI of the AVFs were used to calculate lumen cross-sectional area (CSA) and perform computational fluid dynamics (CFD) to analyze hemodynamics, including velocity, wall shear stress (WSS), and vorticity. For the venous limb, the no-intervention group and intervention group had similar pre-surgery vein diameter and 1-day post-surgery venous CSA. However, the no-intervention group had statistically larger 1-day venous velocity (0.97 ± 0.67 m/s; mean ± SD), WSS (333 ± 336 dyne/cm 2 ) and vorticity (1709 ± 1290 1/s) than the intervention group (velocity = 0.23 ± 0.10 m/s; WSS = 49 ± 40 dyne/cm 2 ; vorticity = 493.1 ± 227 1/s) ( P < 0.05). At 6 months, the no-intervention group had statistically larger venous CSA (43.5 ± 27.4 mm 2 ) than the intervention group (15.1 ± 6.2 mm 2 ) ( P < 0.05). Regarding the arterial limb, no-intervention AVF arteries also had statistically larger 1-day velocity (1.17 ± 1.0 m/s), WSS (340 ± 423 dyne/cm 2 ), vorticity (1787 ± 1694 1/s), and 6-month CSA (22.6 ± 22.7 mm 2 ) than the intervention group (velocity = 0.64 ± 0.36 m/s; WSS = 104 ± 116 dyne/cm 2 , P < 0.05; vorticity = 867 ± 4551/s; CSA = 10.7 ± 6.0 mm 2 , P < 0.05). Larger venous velocity, WSS, and vorticity immediately after AVF creation surgery may be important for later lumen enlargement and AVF maturation, with the potential to be used as a tool to help diagnose poor AVF maturation earlier. However, future studies using a larger cohort are needed to validate this finding and determine cut off values, if any.

cardiac & cardiovascular systems
The importance of the quality of indoor air.

L. Hinkle,S. Murray

1981-12-01

Abstract:T his paper considers one question: To what extent do particles and gases that occur in the air inside buildings now adversely affect the health of people in the United States? The discussion will be confined to dwellings and other buildings in which the air is intended to be free from potentially damaging substances. Air within buildings in which people customarily carry out industrial or commercial processes that may be expected to generate hazardous airborne substances, and the air enclosed within vehicles will not be considered.
Effect of blood viscosity on the hemodynamics of arteriovenous fistulae based on numerical investigation

Ning ZhaoTian ZhangTianyu ZhangBaohui WangWeina MuFan Wanga School of Quality and Technical Supervision,Hebei University,Baoding,Chinab Baoding No.1 Central Hospital,Baoding,China

DOI: https://doi.org/10.1080/10255842.2024.2333926

IF: 1.6

2024-04-03

Computer Methods in Biomechanics & Biomedical Engineering

Abstract:Arteriovenous fistula (AVF) is the most commonly used vascular access for hemodialysis in patients with end-stage renal disease. Vascular diseases such as atherosclerosis and thrombosis, triggered by altered hemodynamic conditions, are the main causes of access failure. Changes in blood viscosity accelerate access dysfunction by affecting local velocities and wall shear stress (WSS) distribution in the circulation. Numerical simulation was employed to analyze and compare the hemodynamic behavior of AVF under different blood viscosities (0.001–0.012 Pa∙s). An idealized three-dimensional model with end-to-side anastomosis was established. Transient simulations were conducted using pulsatile inlet velocity and outflow as boundary conditions. The simulation results reveal the blood flow state of AVF under different viscosity physiological conditions and derive the rule of change. When blood viscosity increases, the local velocity in the disturbed region slows down and the stagnation time becomes longer, resulting in increased deposition of substances. As blood viscosity increases, the level of shear stress on the entire wall of the fistula increases accordingly. WSS values at high viscosities above 0.007 Pa∙s showed significantly larger low-shear regions near the anastomosis and increased chances of inducing atheromatous plaques. This research has revealed the correlation between blood dynamic viscosity and the hemodynamic behavior of AVF. Elevated whole blood viscosity increases the incidence of access obstruction and vascular disease leading to fistula failure. The study provides a basis for optimizing the distribution of hemodynamic parameters in the fistula for hemodialysis patients.

engineering, biomedical,computer science, interdisciplinary applications
Enhancing the implantation of mechanical circulatory support devices using computational simulations

Gabriela Lopez-Santana,Alessandro De Rosis,Stuart Grant,Rajamiyer Venkateswaran,Amir Keshmiri

DOI: https://doi.org/10.3389/fbioe.2024.1279268

IF: 5.7

2024-04-26

Frontiers in Bioengineering and Biotechnology

Abstract:Introduction: Patients with end-stage heart failure (HF) may need mechanical circulatory support such as a left ventricular assist device (LVAD). However, there are a range of complications associated with LVAD including aortic regurgitation (AR) and thrombus formation. This study assesses whether the risk of developing aortic conditions can be minimised by optimising LVAD implantation technique. Methods: In this work, we evaluate the aortic flow patterns produced under different geometrical parameters for the anastomosis of the outflow graft (OG) to the aorta using computational fluid dynamics (CFD). A three-dimensional aortic model is created and the HeartMate III OG positioning is simulated by modifying (i) the distance from the anatomic ventriculo-arterial junction (AVJ) to the OG, (ii) the cardinal position around the aorta, and (iii) the angle between the aorta and the OG. The continuous LVAD flow and the remnant native cardiac cycle are used as inlet boundaries and the three-element Windkessel model is applied at the pressure outlets. Results: The analysis quantifies the impact of OG positioning on different haemodynamic parameters, including velocity, wall shear stress (WSS), pressure, vorticity and turbulent kinetic energy (TKE). We find that WSS on the aortic root (AoR) is around two times lower when the OG is attached to the coronal side of the aorta using an angle of 45° ± 10° at a distance of 55 mm. Discussion: The results show that the OG placement may significantly influence the haemodynamic patterns, demonstrating the potential application of CFD for optimising OG positioning to minimise the risk of cardiovascular complications after LVAD implantation.

multidisciplinary sciences
Obstructive hydrocephalus due to CNS toxocariasis

J. Choi,J. Cho,Jae-Hyeok Lee,Sang Weon Lee,H. Kim,Kwang-Dong Choi

DOI: https://doi.org/10.1016/j.jns.2013.03.009

2013-06-15

Journal of Neurological Sciences

Abstract:
Arteriovenous fistula cannulation in hemodialysis: A vascular access clinical practice guidelines narrative review

Rui Pinto,Clemente Sousa,Anabela Salgueiro,Isabel Fernandes

DOI: https://doi.org/10.1177/11297298211006972

Abstract:The cannulation of an arteriovenous fistula (AVF) by the hemodialysis (HD) nurse is challenging. Despite it being the focus of extensive research, it is still one of the majors causes of damage making it prone to failure. A considerable number of Clinical Practice Guidelines (CPGs) for the management of vascular access (VA) have been published worldwide over the past two decades. This review aimed to assess all information available in the selected CPG regarding AVF cannulation for HD providing a comprehensive analysis in order to interpret possible future cannulation approaches. A total of seven CPGs were described in a coding table separated in seven subthemes: Initiation of cannulation, preparation, technique, needle selection, surveillance, pain, and education. Our analysis outlines current CPGs for HD VA cannulation with lack of good evidence support for the majority of the recommendations, showing that, there is an urgent need for international collaboration and coordination to ensure relevant and high-quality evidence. Future CPGs must consider recommendations with better grading of evidence aiming patient-centered care and nurse decision models that can potentially represent better AVF cannulation outcomes.
Fluid–structure interaction in a follow-up study of arterio-venous fistula maturation

Daniel Jodko,Tracie Barber

DOI: https://doi.org/10.1038/s41598-024-80916-y

IF: 4.6

2024-11-30

Scientific Reports

Abstract:Arteriovenous fistula (AVF) is the preferred vascular access for hemodialysed patients. AVF is created surgically using the patient's artery and vein. Once the connection (anastomosis) is made, the maturation process begins. Studies have shown that most AVFs do not survive beyond one year. This study presents fluid–structure interaction (FSI) modelling of non-Newtonian blood flow through an end-to-side radio-cephalic AVF, investigated weekly during a 15-week follow-up period and 1.5 years postoperatively using ultrasound methods. The aim was to collect qualitative and quantitative data regarding changes in hemodynamics and alterations in the walls of AVF vasculature. Different material properties were assigned to the artery, suture zone (anastomosis), and vein, while the stiffening of the venous arm over time was also modelled. The proposed FSI methodology can be implemented in future follow-up studies involving groups of patients. The main findings revealed: a) counter-rotating vortices in the anastomosis cross-section affecting local pressure conditions; b) different temporal progression of vorticity, shear strain rate, and turbulent kinetic energy and similarity of the temporal progression of WSS obtained under the assumptions of the rigid-walled and FSI; c) a negligible low-WSS zone in the presented thrombosis-free AVF; d) migration of the zone of maximal temporal wall deformation over time.

multidisciplinary sciences
Analyses of hemodialysis arteriovenous fistula geometric configuration and its associations with maturation and reintervention

Yong He,Hannah Northrup,Prabir Roy-Chaudhury,Alfred K Cheung,Scott A Berceli,Yan-Ting Shiu,Alfred K. Cheung,Scott A. Berceli

DOI: https://doi.org/10.1016/j.jvs.2020.09.033

IF: 4.86

2021-05-01

Journal of Vascular Surgery

Abstract:An arteriovenous fistula (AVF) is the preferred vascular access for chronic hemodialysis, yet the rates of AVF maturation failure and reintervention remain high. We investigated the AVF geometric parameters and their associations with AVF physiologic maturation and reintervention in a prospective multi-center study.From 2011 to 2016, patients undergoing a vein end-to-artery side upper-extremity AVF creation surgery were recruited. Contrast-free dark-blood and phase-contrast magnetic resonance imaging (MRI) scans were performed using 3.0T scanners to obtain AVF lumen geometry and flow rates, respectively, at postoperative Day 1, Week 6, and Month 6. Arterial-venous anastomosis angle, nonplanarity, and tortuosity of the fistula were calculated based on lumen centerlines. AVFs were considered physiologically matured if, based on the Week 6 MRI data, the flow rate was at least 500 mL/min, and the minimum vein lumen diameter was at least 5 mm. Associations of these geometric parameters with AVF maturation and reintervention due to peri-anastomotic and mid-vein stenosis within one year were assessed.There were 111 patients with usable Day 1 scan, with the majority being upper-arm AVFs (n = 73). Compared to forearm AVFs, upper-arm AVFs had greater anastomosis angles (P < .001), larger deviations from a plane (nonplanarity, P = .002), and more prominent tortuosity (P = .038) at Day 1. These parameters significantly increased between Day 1 and Week 6 in upper-arm AVFs; in contrast, significant changes in these parameters in forearm AVFs were not observed. The rate of maturation was 54% and 86% for forearm and upper-arm AVFs, respectively, with none of the geometric parameters at Day 1 being associated with maturation for AVFs in either location. The rate of reintervention was 24% and 30% for forearm and upper-arm AVFs, respectively, with a larger nonplanarity angle at Day 1 being associated with less reintervention (30° ± 15° vs. 21° ± 10°, P = .034) in upper-arm AVFs only. This relationship was unchanged after adjusting for age, sex, race, dialysis status, or diabetes.Upper-arm fistulas have a larger anastomosis angle, are more nonplanar, and have more tortuous veins than forearm fistulas. For upper-arm fistulas, a larger nonplanarity angle is associated with a lower rate of reintervention within one year. Once confirmed, vascular surgeons may consider increasing the nonplanarity angle by incorporating a tension-free gentle curvature in the proximal segment of the mobilized vein to reduce reinterventions when creating an upper-arm fistula.

surgery,peripheral vascular disease
Design and Simulation of Patient-Specific Tissue-Engineered Bifurcated Right Ventricle-Pulmonary Artery Grafts using Computational Fluid Dynamics

Seda Aslan,Yue-Hin Loke,Paige Mass,Kevin Nelson,Enoch Yeung,Jed Johnson,Justin Opfermann,Hiroshi Matsushita,Takahiro Inoue,Henry Halperin,Laura Olivieri,Narutoshi Hibino,Axel Krieger

DOI: https://doi.org/10.1109/bibe.2019.00188

2019-10-01

Abstract:Patient-specific biodegradable grafts target to enhance surgical repairs of complex congenital heart defects (CHD). This study reports the design, simulation, and creation of bifurcated right ventricle-pulmonary artery (RVPA) conduit grafts for patients with CHD. The original right ventricle outflow tract and RVPA conduit-anatomies of two patients (n=2) who previously underwent Rastelli type surgical repair for their CHD were created using medical image segmentation software based on magnetic resonance imaging data. The pulsatile RVPA flow was simulated utilizing computational fluid dynamics (CFD) to calculate important hemodynamic parameters. The re-designed RVPA geometries for the patients were created by varying the radius and angle of the pulmonary artery bifurcation. The wall shear stress and power loss results of the re-designed RVPA models were compared to identify the best performing graft. The hemodynamic results demonstrated that the designed optimized grafts outperformed the original grafts. To test the feasibility of designed grafts in vivo, the bifurcated RVPA conduit of a pig was manufactured using a 3D printed mandrel and electrospinning technique before the implantation. The implanted graft allowed new tissue formation within weeks. The results of our study and simulations provide an insight into the creation of optimal performing tissue-engineered bifurcated grafts for the patients with CHD in the surgical planning process. Integration of flow simulations to support design and electrospinning technique to manufacture patient-specific biodegradable grafts has the potential to improve surgical outcomes in CHD.

Blocking sets in PG(2, qn) from cones of PG(2n, q)

Tailoring of arteriovenous graft-to-vein anastomosis angle to attenuate pathological flow fields

Transitional Flow in the Venous Side of Patient-Specific Arteriovenous Fistulae for Hemodialysis

Complex formation of sericoside with hydrophilic cyclodextrins: improvement of solubility and skin penetration in topical emulsion based formulations.

The Outcome of the Proximal Radial Artery Arteriovenous Fistula.

Functional analysis of arteriovenous fistulae in non-contrast magnetic resonance images

High fidelity blood flow in a patient-specific arteriovenous fistula

The Anastomotic Angle of Hemodialysis Arteriovenous Fistula Is Associated With Flow Disturbance at the Venous Stenosis Location on Angiography

Tomographic PIV analysis of physiological flow conditions in a patient-specific arteriovenous fistula

Patient-specific hemodynamic markers co-localise with regions of neointimal hyperplasia in an arteriovenous graft

The management of high flow arteriovenous fistula and possible solutions

Tailoring Left Ventricular Assist Device Cannula Implantation Using Coupled Multi-Scale Multi-Objective Optimization

Differential hemodynamics between arteriovenous fistulas with or without intervention before successful use

The importance of the quality of indoor air.

Effect of blood viscosity on the hemodynamics of arteriovenous fistulae based on numerical investigation

Enhancing the implantation of mechanical circulatory support devices using computational simulations

Obstructive hydrocephalus due to CNS toxocariasis

Arteriovenous fistula cannulation in hemodialysis: A vascular access clinical practice guidelines narrative review

Fluid–structure interaction in a follow-up study of arterio-venous fistula maturation

Analyses of hemodialysis arteriovenous fistula geometric configuration and its associations with maturation and reintervention

Design and Simulation of Patient-Specific Tissue-Engineered Bifurcated Right Ventricle-Pulmonary Artery Grafts using Computational Fluid Dynamics