Abstract:During recent years, there has been an increasing demand for the development of rapid biosensing technologies that could be performed outside the laboratory, for example on farms, near rivers, in food collection stations and store houses or in food production plants. Therefore, cost-effective and automatic detection methods are promising for onsite residual analysis in food and environmental monitoring. In this work, we propose an automatic, rapid, highly sensitive and reusable planar waveguide evanescent wave immunosensor (PWEI) for onsite determination of sulfadimidine (SM2) in water and dairy products. The PWEI is based on an indirect inhibition immunoassay that takes place at an optical transducer chip chemically modified with an analyte derivative. Fluorescence produced by labeled antibodies bound to the transducer is excited by the evanescent wave formed on the transducer surface and detected by photodiodes through a lock-in amplifier, which is inversely correlated with the analyte concentration. Each test cycle is completed automatically in 15 min. The optical transducer chip of the PWEI modified with the analyte derivative is robust and features high reusability, which allows for regeneration over 300 times without sensitivity loss. Under the optimized conditions, the dose-response curve established for SM2 shows a low detection limit of 0.06 mu g L-1. The 50% inhibition concentration is 1.39 +/- 0.08 mu g L-1 with a linear working range from 0.19 mu g L-1 to 10.10 mg L-1. The cross-reactivity towards organic compounds structurally similar to SM2 is negligible. The recoveries of SM2 in a variety of dairy products and natural water range from 80% to 107%. The PWEI features portable dimensions of 42 cm x 50 cm x 24 cm (length x width x height) and shows great prospects for the onsite measurement of SM2, when used in combination with the appropriate pretreatment.

Preparation of a V-COF@SWCNTs-COOH/SPCE supported molecularly imprinted electrochemical sensor for real-time detection of trace sulfadimidine

Synthesis of Surface Molecular Imprinting Polymer on SiO 2 -Coated CdTe Quantum Dots As Sensor for Selective Detection of Sulfadimidine

Simple preparation of fluorescence probe based on CdTe quantum dots combined with MIP for selective detection of sulfadimidine

Metallic Transition Metal Dichalcogenide Nanosheets As an Effective and Biocompatible Transducer for Electrochemical Detection of Pesticide.

Dual biomass-derived porous carbon heterogeneous functionalized mesoporous CuCo2O4 nanocomposite combined with molecularly imprinted polymers as an electrochemical sensing platform for hypersensitive and selective determination of dimetridazole contaminants

Ultrasensitive Detection of Diclofenac in Water Samples by a Novel Surface-Enhanced Raman Scattering (Sers)-Based Immunochromatographic Assay Using AgMBA@SiO2-Ab As Immunoprobe

Highly sensitive detection of sulfadimidine in water and dairy products by means of an evanescent wave optical biosensor

Ultrasensitive Detection of Diclofenac Based on Electrochemiluminescent Immunosensor with Multiple Signal Amplification Strategy of Palladium Attached Graphene Oxide As Bioprobes and Ceria Doped Zinc Oxide As Substrates

Highly sensitive electrochemical sensor based on pyrrolidinium ionic liquid modified ordered mesoporous carbon paste electrode for determination of carbendazim

A novel photoresponsive molecularly imprinted polymers based on etched silicon core with enabling enhanced selectivity and sensitivity for the detection of sulfamethazine

Synthesis and characterization of an innovative molecular imprinted polymers based on CdTe QDs fluorescence sensing for selective detection of sulfadimidine

New two-dimensional nanocomposites combined with target-induced strategy in an electrochemical aptasensor for sensitive determination of sulfadimethoxine

A Novel Colorimetric and Fluorescent Dual-Mode 3D Paper-Based Microfluidic Aptasensor for the Point-of-care Detection of Sulfadimethoxine

A robust electrochemical sensing platform using carbon paste electrode modified with molecularly imprinted microsphere and its application on methyl parathion detection

Molecularly imprinted ratiometric electrochemical sensor based on carbon nanotubes/cuprous oxide nanoparticles/titanium carbide MXene composite for diethylstilbestrol detection

A novel electrochemical sensor for rapid detection of sulfathiazole by integrating [(4,4'-bipy/P2Mo17Co)n] modified electrode

Application of Multiwalled Carbon Nanotubes/Ionic Liquid Modified Electrode for Amperometric Determination of Sulfadiazine

A disposable homemade screen printed electrode for famotidine analysis using computer-designed molecularly imprinted polymer based on MWCNT-Fe3O4 nanocomposite in simulated real samples

Ultrasensitive determination of sulfathiazole using a molecularly imprinted electrochemical sensor with CuS microflowers as an electron transfer probe and Au@COF for signal amplification

Ratiometric Fluorescence Nanosensors Based on Core- Shell Structured Carbon/ CdTe Quantum Dots and Surface Molecularly Imprinted Polymers for the Detection of Sulfadiazine

Gold Nanoparticle-Embedded Thiol-Functionalized Ti3C2Tx MXene for Sensitive Electrochemical Sensing of Ciprofloxacin