Abstract:In this study, the first nanomaterial-supported molecularly imprinted polymer (MIP)-based electrochemical approach was proposed to achieve the successful detection of cefdinir (CFD). Here, p-amino benzoic acid (p-ABA) was used as the monomer and the photopolymerization method was chosen to form MIP on a glassy carbon electrode (GCE). ZnO nanoparticles (ZnO NPs) were added to the MIP sensor to increase sensitivity and create high porosity. Through the use of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), characterization investigations confirmed the alterations at each stage of the MIP production process. Electrochemical (cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS)) and scanning electron microscopy (SEM) methods were used for study the characterization studies of the MIP-based nanocomposite sensor. The measurement of MIP parameters, such as the addition of nanoparticles, the removal procedure, the rebinding period, the monomer ratio, etc., was done using the differential pulse voltammetry (DPV). The findings showed that when ZnO NPs were added, the signal was three times higher than when MIPs were used alone. Under the optimized conditions, CFD/4-ABA@ZnONPs/MIP/GCE showed a linear response in the concentration range between 7.5 pM and 100 pM with LOD and LOQ values of 2.06 pM and 6.86 pM, respectively. Anions, cations, and substances including uric acid, ascorbic acid, paracetamol, and dopamine were all used in the selectivity test. In addition, the imprinting factor (IF) study was carried out using compounds such as cefuroxime, cefazolin, cefixime, ceftazidime, and ceftriaxone, which have structural similarities with CFD, as well as impurities such as thiazolylacetyl glycine oxime (IMP-A), thiazolylacetyl glycine oxime acetal (IMP-B), and cefdinir lactone (IMP-E). The results showed that the proposed sensor was selective for CFD, as evidenced by the relative IF values of these impurities. The recovery studies of CFD were successfully applied to tablet dosage form samples, and the developed sensor demonstrated significant sensitivity and selectivity for rapid detection of CFD in tablet dosage form.

A disposable homemade screen printed electrode for famotidine analysis using computer-designed molecularly imprinted polymer based on MWCNT-Fe3O4 nanocomposite in simulated real samples

Preparation of a V-COF@SWCNTs-COOH/SPCE supported molecularly imprinted electrochemical sensor for real-time detection of trace sulfadimidine

Electrochemical Sensing of Favipiravir with an Innovative Water-Dispersible Molecularly Imprinted Polymer Based on the Bimetallic Metal-Organic Framework: Comparison of Morphological Effects

Ultratrace Detection of Histamine Using a Molecularly-Imprinted Polymer-Based Voltammetric Sensor

A novel screen-printed potentiometric electrode with carbon nanotubes/polyaniline transducer and molecularly imprinted polymer for the determination of nalbuphine in pharmaceuticals and biological fluids

A “Single-Use” Ceramic-Based Electrochemical Sensor Chip Using Molecularly Imprinted Carbon Paste Electrode

Development of a New Electrochemical Sensor Based on Molecularly Imprinted Biopolymer for Determination of 4,4′-Methylene Diphenyl Diamine

Amplified Electrochemical Sensor Employing CuO/SWCNTs and 1-Butyl-3-methylimidazolium Hexafluorophosphate for Selective Analysis of Sulfisoxazole in the Presence of Folic Acid.

Developing an exclusive sensor based on molecularly imprinted polymer/Multi-walled carbon nanotubes/Fe3O4@Au nanocomposite for the selective determination of an anti-cancer drug imatinib

Voltammetric Analysis of Mycophenolate Mofetil in Pharmaceutical Samples Via Electrochemical Nanostructure Based Sensor Modified with Ionic Liquid and MgO/SWCNTs

Low Cost, Easy to Prepare and Disposable Electrochemical Molecularly Imprinted Sensor for Diclofenac Detection

Nanomaterial-assisted molecularly imprinted polymer strategies for highly sensitive and selective determination of cefdinir and its validation using computational approach

A polydopamine imprinted array on a binder-free carbon cloth assembled by gold carbon quantum dots as a portable flexible 3D nano-electrochemical sensor for selective trace monitoring of orlistat (xenical)

Bioenzyme-induced molecularly imprinted polymers using optimal design of computational chemistry for enhanced specific electrochemical sensing of protocatechuic acid in medicines

Lab-made screen-printed electrode with conductive ink based on carbon nanomaterials for simultaneous electrochemical analysis of bisphenol A, catechol, and 4-nitrophenol

Rational construction of micro-plate-like iron oxide/aluminium oxide-fabricated screen-printed carbon electrode for the electrochemical detection of the antiandrogen drug

Molecularly imprinted electrochemical sensor based on carbon nanofibers for Amiodarone determination

Fabrication of an Electrochemical Sensor Based on Molecular Imprinting Technology for Detecting Elemene

Fabrication of an Electrocatalyst Based on Rare Earth Manganites Incorporated with Carbon Nanofiber Hybrids: An Efficient Electrochemical Biosensor for the Detection of Anti-Inflammatory Drug Mefenamic Acid

Molecularly Imprinted Sensor Based on 1T/2H MoS2 and MWCNTs for Voltammetric Detection of Acetaminophen

Screen-printed disposable electrodes using graphite-polyurethane composites modified with magnetite and chitosan-coated magnetite nanoparticles for voltammetric epinephrine sensing: a comparative study