Retraction: Sequestration of chromium(vi) and nickel(ii) heavy metals from unhygienic water via sustainable and innovative magnetic nanotechnology

Noor Zulfiqar,Monireh Shariatipour,Fawad Inam

DOI: https://doi.org/10.1039/d4na90109f

2024-10-15

Abstract:[This retracts the article DOI: 10.1039/D3NA00923H.].

What problem does this paper attempt to address?

Removal of Hexavalent Chromium from Wastewater by Cu/Fe Bimetallic Nanoparticles

Jien Ye,Yi Wang,Qiao Xu,Hanxin Wu,Jianhao Tong,Jiyan Shi

DOI: https://doi.org/10.1038/s41598-021-90414-0

IF: 4.6

2021-01-01

Scientific Reports

Abstract:Passivation of nanoscale zerovalent iron hinders its efficiency in water treatment, and loading another catalytic metal has been found to improve the efficiency significantly. In this study, Cu/Fe bimetallic nanoparticles were prepared by liquid-phase chemical reduction for removal of hexavalent chromium (Cr(VI)) from wastewater. Synthesized bimetallic nanoparticles were characterized by transmission electron microscopy, Brunauer-Emmet-Teller isotherm, and X-ray diffraction. The results showed that Cu loading can significantly enhance the removal efficiency of Cr(VI) by 29.3% to 84.0%, and the optimal Cu loading rate was 3% (wt%). The removal efficiency decreased with increasing initial pH and Cr(VI) concentration. The removal of Cr(VI) was better fitted by pseudo-second-order model than pseudo-first-order model. Thermodynamic analysis revealed that the Cr(VI) removal was spontaneous and endothermic, and the increase of reaction temperature facilitated the process. X-ray photoelectron spectroscopy (XPS) analysis indicated that Cr(VI) was completely reduced to Cr(III) and precipitated on the particle surface as hydroxylated Cr(OH)3 and CrxFe1-x(OH)3 coprecipitation. Our work could be beneficial for the application of iron-based nanomaterials in remediation of wastewater.
Enhancing chromium removal and recovery from industrial wastewater using sustainable and efficient nanomaterial: A review

Muhammad Atif Irshad,Sana Sattar,Rab Nawaz,Sami A Al-Hussain,Muhammad Rizwan,Attaullah Bukhari,Muhammad Waseem,Ali Irfan,Aqil Inam,Magdi E A Zaki

DOI: https://doi.org/10.1016/j.ecoenv.2023.115231

2023-09-15

Abstract:Water contamination can be detrimental to the human health due to higher concentration of carcinogenic heavy metals such as chromium (Cr) in the wastewater. Many traditional methods are being employed in wastewater treatment plants for Cr removal to control the environmental impacts. Such methods include ion exchange, coagulation, membrane filtration, and chemical precipitation and microbial degradation. Recent advances in materials science and green chemistry have led to the development of nanomaterial that possess high specific surface areas and multiple functions, making them suitable for removing metals such as Cr from wastewater. Literature shows that the most efficient, effective, clean, and long-lasting approach for removing heavy metals from wastewater involves adsorbing heavy metals onto the surface of nanomaterial. This review assesses the removal methods of Cr from wastewater, advantages and disadvantages of using nanomaterial to remove Cr from wastewater and potential negative impacts on human health. The latest trends and developments in Cr removal strategies using nanomaterial adsorption are also explored in the present review.
Retracted: Role of Nanoparticles in Environmental Remediation: An Insight into Heavy Metal Pollution from Dentistry

Bioinorganic Chemistry and Applications

DOI: https://doi.org/10.1155/2024/9897286

2024-01-27

Bioinorganic Chemistry and Applications

Abstract:This article has been retracted by Hindawi following an investigation undertaken by the publisher [1]. This investigation has uncovered evidence of one or more of the following indicators of systematic manipulation of the publication process: (1) Discrepancies in scope (2) Discrepancies in the description of the research reported (3) Discrepancies between the availability of data and the research described (4) Inappropriate citations (5) Incoherent, meaningless and/or irrelevant content included in the article (6) Manipulated or compromised peer review

chemistry, inorganic & nuclear,biochemistry & molecular biology, organic
Retraction: Synthesis, characterization and cytotoxicity evaluation of a novel magnetic nanocomposite with iron oxide deposited on cellulose nanofibers with nickel (Fe3O4@NFC@ONSM-Ni)

Pouya Ghamari kargar,Maryam Noorian,Elham Chamani,Ghodsieh Bagherzade,Zahra Kiani

DOI: https://doi.org/10.1039/d3ra90131a

IF: 4.036

2024-01-09

RSC Advances

Abstract:Retraction of 'Synthesis, characterization and cytotoxicity evaluation of a novel magnetic nanocomposite with iron oxide deposited on cellulose nanofibers with nickel (Fe 3 O 4 @NFC@ONSM-Ni)' by Pouya Ghamari kargar et al. , RSC Adv. , 2021, 11 , 17413–17430, https://doi.org/10.1039/D1RA01256H.

chemistry, multidisciplinary
Design, Synthesis, and Evaluation of Novel Magnetic Nanoparticles Combined with Thiophene Derivatives for the Removal of Cr(VI) from an Aqueous Solution

Seham S. Alterary,Monirah A. Al-Alshaikh,Athar M. Elhadi,Wenjie Cao

DOI: https://doi.org/10.1021/acsomega.3c07517

IF: 4.1

2024-02-26

ACS Omega

Abstract:Most heavy metals are harmful to human health and the environment, even at extremely low concentrations. In natural waters, they are usually found only in trace amounts. Researchers are paying great attention to nanotechnology and nanomaterials as viable solutions to the problem of water pollution. This research focuses on the synthesis of organic thiophene derivatives that can be used as grafted ligands on the surface of silica-coated iron oxide nanoparticles to remove Cr(VI) chromium ions from...

chemistry, multidisciplinary
Retracted: Heavy Metal Removal from Aqueous Effluents by TiO2 and ZnO Nanomaterials

Adsorption Science and Technology

DOI: https://doi.org/10.1155/2023/9854382

2023-11-30

Adsorption Science & Technology

Abstract:This article has been retracted by Hindawi, as publisher, following an investigation undertaken by the publisher [1]. This investigation has uncovered evidence of systematic manipulation of the publication and peer-review process. We cannot, therefore, vouch for the reliability or integrity of this article.

engineering, chemical,chemistry, applied, physical
Research highlights: engineering nanomaterial-based technologies for environmental applications

Stacey M Louie,John M Pettibone

DOI: https://doi.org/10.1039/c6en90001a

2016-02-01

Abstract:Nanomaterials are currently of interest for water treatment and remediation applications because they can exhibit high adsorption capacities and high reactivity to degrade or transform contaminants. Research is ongoing to further increase the adsorption capacity of the nanomaterials and to engineer nanomaterial-based treatment systems for contaminant removal. Here, we highlight three articles that advance this field by devising and testing approaches to improve the design of nanomaterials as well as their implementation in water treatment applications. One study demonstrates a method for non-covalent surface functionalization to produce silica and magnetite nanoparticles exhibiting thiol ligands for heavy metal removal. In another study, the surface coating chemistry of manganese oxide nanoparticles is optimized to enhance their uranyl sorption capacity. Finally, we highlight research that evaluates the overall implementation of magnetite nanoparticles for removal of hexavalent chromium (Cr(vi)) from water, including the production of the nanoparticles, their efficiency in removing (Cr(vi)) in a reactor, and the recovery of the used NPs in a magnetic separation system.
Retraction: Magnetic polydopamine decorated with Mg–Al LDH nanoflakes as a novel bio-based adsorbent for simultaneous removal of potentially toxic metals and anionic dyes

Jie Li,Qiaohui Fan,Yijin Wu,Xiangxue Wang,Changlun Chen,Zhiyong Tang,Xiangke Wang

DOI: https://doi.org/10.1039/d2ta90293a

IF: 11.9

2022-12-13

Journal of Materials Chemistry A

Abstract:Retraction of 'Magnetic polydopamine decorated with Mg–Al LDH nanoflakes as a novel bio-based adsorbent for simultaneous removal of potentially toxic metals and anionic dyes' by Jie Li et al. , J. Mater. Chem. A , 2016, 4 , 1737–1746, https://doi.org/10.1039/C5TA09132B.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Implementing magnetically-active Sn-based nanocomposites in hexavalent chromium removal from drinking water

Theopoula Asimakidou,Kyriaki Kalaitzidou,Fani Pinakidou,Ting Zhou,Pilar Rivera-Gil,Lluis Balcells,Manassis Mitrakas,Antonios Makridis,Maria Katsikini,George Vourlias,Konstantinos Chrissafis,Konstantinos Simeonidis

DOI: https://doi.org/10.1016/j.chemosphere.2024.142529

IF: 8.8

Chemosphere

Abstract:A novel nanocomposite consisting of Fe3O4-loaded tin oxyhydroxy-chloride is demonstrated as an efficient adsorbent for the removal of hexavalent chromium in compliance to the new drinking water regulation. This study introduces a continuous-flow production of the nanocomposite through the separate synthesis of (i) 40 nm Fe3O4 nanoparticles and (ii) multilayered spherical arrangements of a tin hydroxy-chloride identified as abhurite, before the application of a wet-blending process. The homogeneous distribution of Fe3O4 nanoparticles on the abhurite's morphology, features nanocomposite with magnetic response whereas the 10 % loaded nanocomposite preserves a Cr(VI) uptake capacity of 7.2 mg/g for residual concentrations below 25 μg/L. Kinetic and thermodynamic examination of the uptake evolution indicates a relative rapid Cr(VI) capture dominated by interparticle diffusion and a spontaneous endothermic process mediated by reduction to Cr(III). The efficiency of the optimized nanocomposite was validated in a pilot unit operating in a sequence of a stirring reactor and a rotary magnetic separator showing an alternative and competitive application path than typical fixed-bed filtration, which is supported by the absence of any acute cellular toxicity according to human kidney cell viability tests.
Enhanced Removal of Nanoplastics from Freshwater Using In-Situ Synthesized and Anchored Nano-Fe3o4 Via Two-Step Ferrous Oxidation

Jiarong Li,Yan Zhang,Cuiyun Zeng,Qiang Xiong,Hua Zhang,Qiaohui Guo,Lu Wang,Jun Ma,Shuiliang Chen

DOI: https://doi.org/10.1016/j.cej.2024.156205

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Magnetic separation is a promising strategy for removing nanoplastics (NPs) from water; however, it often requires complex processeses, such as synthesizing nano-Fe3O4 magnets and attaching them to specific carriers. This study presents an innovative and efficient strategy to in-situ synthesize and anchor nano-Fe3O4 onto polystyrene (PS) NPs through a two-step oxidation of ferrous ions, which significantly enhances NPs removal via magnetic separation. The two-step process involves initial alkalization of a ferrous aqueous solution under anoxic conditions, followed by oxidation in air. In the presence of PS spheres, nano-Fe3O4 forms in-situ on the PS surfaces, promoting sedimentation under a magnetic field. Results demonstrate that two-step ferrous oxidation achieves superior removal rates, with 99.32 % for 500 nm PS spheres (PS-500) and 93.16 % for 100 nm PS spheres (PS-100) using a low Fe2+ dosage of 0.1 mM. In contrast, the conventional one-step method, which simultaneously alkalizes and oxidizes ferrous sulfate in aerobic conditions, fails to form nano-Fe3O4 and results in low removal rates of only 56.49 % for PS-500 and 8.89 % for PS-100, respectively. Furthermore, the turbidity and residual Fe can be reduced to below 1 NTU and 0.1 mg/L by using two-step process, respectively, meeting drinking water safety and hygiene standards. This approach not only simplifies the magnetic nanomaterial preparation process but also substantially improves the NP removal efficiency, offering a promising solution for enhanced water treatment technologies and safer drinking water.
Green synthesis and characterization of silver and copper nanoparticles and their use as an effective adsorbent for chromium removal and recovery from wastewater

Muhammad Atif Irshad,Sana Sattar,Arwa Abdulkreem Al-Huqail,Suliman M S Alghanem,Rab Nawaz,Noor Ul Ain,Khalid Mahmud Hussaini,Amany H A Abeed

DOI: https://doi.org/10.1007/s11356-023-30141-3

Abstract:Chromium (Cr) is one of the hazardous heavy metals that is naturally carcinogenic and causes various health problems. Metallic nanoparticles such as silver and copper nanoparticles (Ag NPs and Cu NPs) have gained great attention because of their unique chemical, physical, and biological attributes, serving diverse and significant role in various useful and sustainable applications. In the present study, both of these NPs were synthesized by green method in which Azadirachta indica plant extract was used. These nanoparticles were characterized by using advanced instrumental techniques such as Fourier transmission infrared (FTIR), X-ray diffraction (XRD), scanning electron microscope attached with energy-dispersive spectroscopy (SEM-EDS), and elemental mapping. These environmentally friendly nanoparticles were utilized for the batch removal of Cr from the wastewater. For analysis of adsorption behaviour, a range of kinetic isotherm models (Freundlich, Temkin, Dubinin, and Langmuir) and kinetic models (pseudo-first-order and pseudo-second-order) were used for the Cu-NPs and Ag-NPs. Cu NPs exhibited the highest Cr removal efficiency (96%) within a contact time of 10-15 min, closely followed by Ag NPs which achieved a removal efficiency of 94% under the similar conditions. These optimal outcomes were observed at a sorbent dose of 0.5 g/L for Ag NPs and 0.7 g/L for Cu NPs. After effectively capturing Cr using these nanoparticles, the sorbates were examined through SEM-EDX analysis to observe how much Cr metal was attached to the nanoparticles, potentially for future use. The analysis found that Ag-NPs captured 18% of Cr, while Cu-NPs captured 12% from the aqueous solution. More precise experimental conditions are needed for higher Cr removal from wastewater and determination of the best conditions for industrial-level Cr reuse. Although nanomaterial exhibit high efficiency and selectivity for Cr removal and recovery from wastewater, more research is necessary to optimize their synthesis and performance for industrial-scale applications and develop efficient methods for Cr removal and recovery.
Synthesis and characterization of nanostructured Fe3O4 micron-spheres and their application in removing toxic Cr ions from polluted water

Gang Liu,Quan Deng,Huimin Wang,Shenghong Kang,Yong Yang,Dickon H L Ng,Weiping Cai,Guozhong Wang

DOI: https://doi.org/10.1002/chem.201200864

2012-10-15

Chemistry

Abstract:We present a simple and effective method for the synthesis of nanostructured Fe(3)O(4) micron-spheres (NFMSs) by annealing hydrothermally formed FeCO(3) spheres in argon. The phase structure, particle size, and magnetic properties of the product have been characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and by means of a superconducting quantum interference device (SQUID). The results have shown that the as-obtained NFMSs have a diameter of about 5 μm and are composed of nanometer-sized porous lamellae. The NFMSs have a large specific surface area (135.9 m(2) g(-1)), reductive Fe(2+) incorporated into their structure, and intense magnetic properties. These properties suggest that NFMSs have potential application in removing toxic Cr(6+) ions from polluted water. At 25°C, each gram of NFMSs product can remove 43.48 mg of Cr(6+) ions, as compared to just 10.2 mg for nanometer-sized Fe(3)O(4) and 1.89 mg for micron-sized Fe(3)O(4). The enhanced removal performance can be ascribed to the structural features. Moreover, the Cr(6+) ion removal capacity of the NFMSs can reach up to 71.2 mg g(-1) at 50°C. The influencing parameters in the removal of Cr(6+) ions, such as contact time, pH, and temperature, have been evaluated. The Cr(6+)-removal mechanism has been investigated. We have found that the NFMSs product not only serves as an effective adsorbent to remove toxic Cr(6+) ions from polluted water, but also as an effective reductant in reducing the adsorbed toxic Cr(6+) ions to much less toxic Cr(3+) through the Fe(2+) incorporated into its structure.
Nano-revolution in heavy metal removal: engineered nanomaterials for cleaner water

Arun Karnwal,Tabarak Malik

DOI: https://doi.org/10.3389/fenvs.2024.1393694

IF: 5.411

2024-05-06

Frontiers in Environmental Science

Abstract:Engineered nanomaterials have emerged as a promising technology for water treatment, particularly for removing heavy metals. Their unique physicochemical properties enable them to adsorb large quantities of metals even at low concentrations. This review explores the efficacy of various nanomaterials, including zeolites, polymers, chitosan, metal oxides, and metals, in removing heavy metals from water under different conditions. Functionalization of nanomaterials is a strategy to enhance their separation, stability, and adsorption capacity. Experimental parameters such as pH, adsorbent dosage, temperature, contact time, and ionic strength significantly influence the adsorption process. In comparison, engineered nanomaterials show promise for heavy metal remediation, but several challenges exist, including aggregation, stability, mechanical strength, long-term performance, and scalability. Furthermore, the potential environmental and health impacts of nanomaterials require careful consideration. Future research should focus on addressing these challenges and developing sustainable nanomaterial-based remediation strategies. This will involve interdisciplinary collaboration, adherence to green chemistry principles, and comprehensive risk assessments to ensure the safe and effective deployment of nanomaterials in heavy metal remediation at both lab and large-scale levels.

environmental sciences
Retraction: Superior adsorption capacity of hierarchical iron oxide@magnesium silicate magnetic nanorods for fast removal of organic pollutants from aqueous solution

Shouwei Zhang,Wenqing Xu,Meiyi Zeng,Jie Li,Jiaxing Li,Jinzhang Xu,Xiangke Wang

DOI: https://doi.org/10.1039/d1ta90196f

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:Retraction of ‘Superior adsorption capacity of hierarchical iron oxide@magnesium silicate magnetic nanorods for fast removal of organic pollutants from aqueous solution’ by Shouwei Zhang et al. , J. Mater. Chem. A , 2013, 1 , 11691–11697, DOI: 10.1039/C3TA12767B.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Sequestration of zirconium and hafnium content using magnetic cellulose/chitosan nanocomposites from waste effluents

Amal E. Mubark

DOI: https://doi.org/10.1016/j.jwpe.2023.104759

IF: 7

2024-01-10

Journal of Water Process Engineering

Abstract:New Magnetic nanocomposites containing biological polymer (i.e. chitosan and cellulose) as reinforcers were synthesized. Successful fabrication of the magnetic cellulose-chitosan (MCCh) nanocomposites with norvaline (MCCh-N) and 8-hydroxyquinoline (MCCh-8H), respectively were achieved and investigated as a zirconium and hafnium ions adsorbent in aquatic media. The felicitous synthesis was confirmed using FTIR, TGA , TEM, DLS, XRD, SEM-EDX, and BET analyses. The nanocomposites (MCCh-N and MCCh-8H) performance was evaluated under different conditions of adsorbent dose (0.01–0.1 g), Zr(IV) and Hf(IV) initial concentration (100–500 mg/L), pH (1.0–2.5), temperature (~25–55 °C), and time (~10–120 min). The adsorption process of both metal ions on the prepared nanocomposites was modeled using Langmuir, Freundlich, Temkin, and D-R models. The elimination of Zr(IV) and Hf(IV) by MCCh-N and MCCh-8H followed a pseudo-second-order kinetic model (R 2 = 0.998, 0.997 and 0.998, 0.999), respectively. Furthermore, kinetic, thermodynamic, and reusability studies were conducted to evaluate the behavior and adsorption mechanism of Zr(IV) and Hf(IV) on the surface of MCCh-N and MCCh-8H nanocomposite. All in all, the high removal capturing and recovering zirconium and hafnium ions from laboratory wastewater and waste solution resulting from the leaching process of the Abu Rusheid concentrate sample make MCCh-N and MCCh-8H potential adsorbents for in situ treatment of zirconium and hafnium ions-containing aqueous solutions.

engineering, chemical, environmental,water resources
Assessing Physicochemical Technologies for Removing Hexavalent Chromium from Contaminated Waters—an Overview and Future Research Directions

Nilisha Itankar,Yogesh Patil

DOI: https://doi.org/10.1007/s11270-022-05745-z

2022-08-18

Abstract:Heavy metal contamination of groundwater is one of the most recent and serious environmental issues. Chromium (VI), also called hexavalent chromium, is one such metal. It poses a critical threat to the environment because of its high toxicity and carcinogenic nature. Chromium compounds are extensively used in industries like metallurgies, tanneries, refectories, electroplating, and steel, which in turn releases chromium (VI) containing effluent into the environment. Being a heavy metal, it is non-biodegradable and thus remains persistent in the ecosystem, contaminating water and soil. Before discharge of chromium (VI)–containing effluent, bringing it to a permissible level as per statutory norms requires a remediation process. The World Health Organization recommended a level of 0.1 mg/L of chromium in water for human consumption. Numerous approaches can be used to address these issues. Among the different approaches available, the traditional method involves chemical precipitation, filtration, solvent extraction, electrocoagulation, catalytic reduction, membrane filtration, biological treatment, and ion exchange. The later advancements incorporate the use of nanotechnology and photo-catalytic reduction. Conventional methods are, however, associated with certain drawbacks such as high sludge formation, which requires licence disposal, high chemical/energy requirements, and low removal efficiency. In the recent past, newer, innovative, and more economical technologies like photocatalysis and nanotechnology have been investigated and found to be more efficient even at low metal ion concentrations. The major purpose of this article is to provide up-to-date information on extensively used techniques, with an emphasis on the significant issues that are experienced while removing hexavalent chromium from water.
A new nano-sorbent for fast and efficient removal of heavy metals from aqueous solutions based on modification of magnetic mesoporous silica nanospheres

Hossein Vojoudi,Alireza Badiei,Shahriyar Bahar,Ghodsi Mohammadi Ziarani,Farnoush Faridbod,Mohammad Reza Ganjali

DOI: https://doi.org/10.1016/j.jmmm.2017.05.065

IF: 3.097

2017-11-01

Journal of Magnetism and Magnetic Materials

Abstract:In the present study, a new and efficient nanosorbent for the fast removal of heavy metal ions was prepared. The proposed nanosorbent was fabricated using Fe3O4 magnetic core shelled by mesoporous silica, and cetyltrimethylammonium bromide (CTAB) as surfactant template through a sol-gel process. The magnetic nanomaterial was further modified with bis(3-triethoxysilylpropyl)tetrasulfide (MSCMNPs-S4). The final nanosphers were characterized by FT-IR, XRD, TGA, BET, SEM, TEM, DLS, VSM, EDX, and UV–Vis. The potential of the resultant mesoporous magnetite nanomaterials was investigated as a convenient and effective adsorbent for the removal of toxic heavy metal ions from aqueous solutions in a batch system. The effect of essential parameters on the removal efficiency including initial pH of sample solution, adsorbent amount, metal ion concentration, contact time and type and quantity of the eluent on the adsorption characteristics of the MSCMNPs-S4 were studied. Under the optimized conditions, the proposed nanosorbent exhibited high adsorption capacity of 303.03, 256.41 and 270.27mgg−1 and maximum removal percentages of 98.8%, 96.4%, 95.7% for Hg(II), Pd(II) and Pb(II) ions, respectively. The mechanism of the adsorbtion was found to be in good agreement with the Langmuir isotherm model. Furthermore, the reusability investigation indicated that the MSCMNPs-S4 could be used frequently at least for five cycles without any significant loss in its performance.

materials science, multidisciplinary,physics, condensed matter
Fast removal of heavy metals from water and soil samples using magnetic Fe3O4 nanoparticles

Anita Singh,Sudesh Chaudhary,Brijnandan S Dehiya

DOI: https://doi.org/10.1007/s11356-020-10737-9

Abstract:Heavy metal discharge from anthropogenic sources on open soil surfaces and in natural water bodies poses serious environmental and health concerns. In addition to the contamination reduction of metals at the source, post-discharge removal of metals using nanoparticles is one of the remediation technologies being explored nowadays due to its cost-effectiveness, being environment-friendly, and easy application as a technique. In this work, magnetic iron oxide (Fe3O4) nanoparticles were synthesized chemically and then used for the removal of heavy metals (Cd, Cr, Cu, Fe, Ni, Pb, and Zn) from water and soil samples. The heavy metal removal efficiency of these iron oxide nanoparticles for different metals in water was best observed at a pH of 4.5 and varied between 63.5 and 98.3%. However, the removal efficiency of these nanoparticles from the soil sample was only measured at a pH of 0.7, and heavy metal removal efficiency varied between 69.6 and 99.6%. In both soil and water samples, the most efficient remediation time was less than 20 min, after which desorption and even dissolution of the nanoparticles can occur at a highly acidic pH. Among all selected metals for removal, lead showed the best adsorption and hence removal efficiency. The nanoparticles were characterized using the TEM, XRD, and FTIR techniques. The adsorption efficiency of various metals was estimated by using atomic absorption spectroscopy. The results suggest that the removal efficiency and stability of adsorbed products can further be improved by adjusting the pH higher towards 7 and also perhaps by modifying the nanoparticles with functional groups. The primary advantage of the magnetic un-coated nanoparticles is easy and efficient removal of the nanoparticles from the treated solutions by using an ordinary magnet.
Decontamination of ubiquitous harmful microbial lineages in water using an innovative Zn2Ti0.8Fe0.2O4 nanostructure: dielectric and terahertz properties

Amany Mohamed El Nahrawy,Ali Belal Abou Hammad,Ahmed Mohamed Bakr,Bahaa Ahmed Hemdan,Ahmed Ramzy Wassel

DOI: https://doi.org/10.1016/j.heliyon.2019.e02501

IF: 3.776

2019-09-24

Heliyon

Abstract:Many ubiquitous dangerous microbial lines could originate in different sources of polluted water and be distributed to tap water, which could cause multiple types of illnesses to humans and livestock. Despite enormous attempts to guarantee safety of potable water, these species are still regarded to be threated prevalent health issues and concerns. However, these species need a powerful disinfectant to be removed from contaminated water for receiving clean and healthy water. This study was therefore conducted to produce magnificent magnetic iron titanate zinc nano-particles (Zn2Ti0.8Fe0.2O4 MNPs) as a sophisticated approach for drinking water (DW) and wastewater purification. The identification of crystalline phase, dielectric and terahertz spectroscopy of iron zinc titanate nanostructure prepared via acidic sol-gel process and calcined at 800 °C. Results show that the formation of cubic structure for Zn2TiO4 phase, and the dielectric constant (ε') decreased with the higher frequency, tan (δ) has higher values at lower frequency and the conductivity increases relatively with frequency that attributes to the high resistive grain boundaries. Absorption coefficient, refractive index and dielectric properties of iron zinc titanate nano-particles was estimated via time domain-terahertz spectrometer and adjusted via the applied electric field. In particular, the Gram-negative bacteria were more prone than other microbes tested to the Magnetic Nano-Particles (MNPs). Results also was ascertained that the minimum inhibitory concentration (MIC) was 25 ppm at 30 min for E. coli and Salmonella enterica, 45 min for Listeria monocyteogens, Staphylococcus aureus, and Candida albicans and 60 min for Aspergillus niger with a noticeable bactericidal impact. Results exhibit that the MNPs explored are non-toxic and protected for individuals and the environment. MNPs can, therefore, be proposed as an expedient and impressive nano-scale applicant for inactivation during the drinking water and wastewater conservation of the prevailing dangerous microbes.

Retraction: Sequestration of chromium(vi) and nickel(ii) heavy metals from unhygienic water via sustainable and innovative magnetic nanotechnology

Removal of Hexavalent Chromium from Wastewater by Cu/Fe Bimetallic Nanoparticles

Enhancing chromium removal and recovery from industrial wastewater using sustainable and efficient nanomaterial: A review

Retracted: Role of Nanoparticles in Environmental Remediation: An Insight into Heavy Metal Pollution from Dentistry

Retraction: Synthesis, characterization and cytotoxicity evaluation of a novel magnetic nanocomposite with iron oxide deposited on cellulose nanofibers with nickel (Fe3O4@NFC@ONSM-Ni)

Design, Synthesis, and Evaluation of Novel Magnetic Nanoparticles Combined with Thiophene Derivatives for the Removal of Cr(VI) from an Aqueous Solution

Retracted: Heavy Metal Removal from Aqueous Effluents by TiO2 and ZnO Nanomaterials

Research highlights: engineering nanomaterial-based technologies for environmental applications

Retraction: Magnetic polydopamine decorated with Mg–Al LDH nanoflakes as a novel bio-based adsorbent for simultaneous removal of potentially toxic metals and anionic dyes

Implementing magnetically-active Sn-based nanocomposites in hexavalent chromium removal from drinking water

Enhanced Removal of Nanoplastics from Freshwater Using In-Situ Synthesized and Anchored Nano-Fe3o4 Via Two-Step Ferrous Oxidation

Green synthesis and characterization of silver and copper nanoparticles and their use as an effective adsorbent for chromium removal and recovery from wastewater

Synthesis and characterization of nanostructured Fe3O4 micron-spheres and their application in removing toxic Cr ions from polluted water

Nano-revolution in heavy metal removal: engineered nanomaterials for cleaner water

Retraction: Superior adsorption capacity of hierarchical iron oxide@magnesium silicate magnetic nanorods for fast removal of organic pollutants from aqueous solution

Sequestration of zirconium and hafnium content using magnetic cellulose/chitosan nanocomposites from waste effluents

Assessing Physicochemical Technologies for Removing Hexavalent Chromium from Contaminated Waters—an Overview and Future Research Directions

A new nano-sorbent for fast and efficient removal of heavy metals from aqueous solutions based on modification of magnetic mesoporous silica nanospheres

Fast removal of heavy metals from water and soil samples using magnetic Fe3O4 nanoparticles

Decontamination of ubiquitous harmful microbial lineages in water using an innovative Zn2Ti0.8Fe0.2O4 nanostructure: dielectric and terahertz properties