Abstract:Scaffolds for bone tissue engineering require considerable mechanical strength to repair damaged bone defects. In this study, we designed and developed mechanically competent composite shape memory triphasic bone scaffolds using fused filament fabrication (FFF) three dimensional (3D) printing. Wollastonite particles (WP) were incorporated into the poly lactic acid (PLA)/polycaprolactone (PCL) matrix as a reinforcing agent (up to 40 wt%) to harness osteoconductive and load-bearing properties from the 3D printed scaffolds. PCL as a minor phase (20 wt%) was added to enhance the toughening effect and induce the shape memory effect in the triphasic composite scaffolds. The 3D-printed composite scaffolds were studied for morphological, thermal, and mechanical properties, in vitro degradation, biocompatibility, and shape memory behaviour. The composite scaffold had interconnected pores of 550 μm, porosity of more than 50%, and appreciable compressive strength (∼50 MPa), which was over 90% greater than that of the pristine PLA scaffolds. The flexural strength was improved by 140% for 40 wt% of WP loading. The inclusion of WP did not affect the thermal property of the scaffolds; however, the inclusion of PCL reduced the thermal stability. An accelerated in vitro degradation was observed for WP incorporated composite scaffolds compared to pristine PLA scaffolds. The inclusion of WP improved the hydrophilic property of the scaffolds, and the result was significant for 40 wt% WP incorporated composite scaffolds having a water contact angle of 49.61°. The triphasic scaffold exhibited excellent shape recovery properties with a shape recovery ratio of ∼84%. These scaffolds were studied for their protein adsorption, cell proliferation, and bone mineralization potential. The incorporation of WP reduced the protein adsorption capacity of the composite scaffolds. The scaffold did not leach any toxic substance and demonstrated good cell viability, indicating its biocompatibility and growth-promoting behavior. The osteogenic potential of the WP incorporated scaffolds was observed in MC3T3-E1 cells, revealing early mineralization in pre-osteoblast cells cultured in different WP incorporated composite scaffolds. These results suggest that 3D-printed WP reinforced PLA/PCL composite bioactive scaffolds are promising for load bearing bone defect repair.

3D-Printed Shape Memory and Piezoelectric Bifunctional Thermoplastic Polyurethane/Polyvinylidene Fluoride Porous Composite Scaffold for Bone Regeneration

3D-Printed Piezoelectric Scaffolds with Shape Memory Polymer for Bone Regeneration

3D biocompatible bone engineering foams with tunable mechanical properties and porous structures

Porous bone tissue scaffold concept based on shape memory PLA/Fe3O4

Improving bone regeneration with composites consisting of piezoelectric poly(l-lactide) and piezoelectric calcium/manganese co-doped barium titanate nanofibers

3D Printing of Piezoelectric Barium Titanate-Hydroxyapatite Scaffolds with Interconnected Porosity for Bone Tissue Engineering

Design and development of 3D printed shape memory triphasic polymer-ceramic bioactive scaffolds for bone tissue engineering

3D printed barium titanate/calcium silicate composite biological scaffold combined with structural and material properties

A Multimaterial Scaffold With Tunable Properties: Toward Bone Tissue Repair

Layered Co-Continuous Structure in Bone Scaffold Fabricated by Laser Additive Manufacturing for Enhancing Electro-Responsive Shape Memory Properties

3D-printed porous functional composite scaffolds with polydopamine decoration for bone regeneration

Biomineralized Piezoelectrically Active Scaffolds for Inducing Osteogenic Differentiation

Preparation and Study of 3D Printed Dipyridamole/β-Tricalcium Phosphate/ Polyvinyl Alcohol Composite Scaffolds in Bone Tissue Engineering

Shape Memory Polyester Scaffold Promotes Bone Defect Repair through Enhanced Osteogenic Ability and Mechanical Stability

Hierarchically Porous Implants Orchestrating a Physiological Viscoelastic and Piezoelectric Microenvironment for Bone Regeneration

Strengthening Mechanism of TPMS Interpenetrating Phase Composites for Bone Tissue Engineering

Novel multi-functional microsphere scaffold with shape memory function for bone regeneration

3D-printed NIR-responsive shape memory polyurethane/magnesium scaffolds with tight-contact for robust bone regeneration

Water-responsive shape memory thermoplastic polyurethane scaffold triggered at body temperature for bone defect repair

In-vitro and in-vivo studies of 4D printed shape memory scaffolds with bioactive fillers and coating for enhanced bone tissue regeneration

3D Printing of Porous Degradable Scaffolds with Polylactic Acid‐Loaded Bioactive Glass and Calcium Sulfate Hemihydrate for Bone Defect Repair