Abstract:As interest in renewable energy increases, the importance of batteries that store surplus power is also increasing. However, frequent ignition issues with the lithium-ion secondary battery arose. One of the next-generation batteries, Zinc-Bromine based aqueous flow batteries, are being actively studied based on advantages of high safety and environmental benignity. However, there is an exorbitant price for flow battery due to the use of a membrane, an electrolyte tank, and a pump. In order to eliminate the shortcomings, this research introduced a form of membraneless and flowless systems. In this study, a nanoporous carbon material doped with nitrogen and boron heteroatoms was synthesized and coated on graphite felt. Differences in electrochemical performance were observed when carbon was coated with different slurry compositions (activated carbon: conductive carbon: binder), dopant amount of heteroatoms, and carbon loading mass. Cyclic voltammetry was performed with a three-electrode system to observe the faradaic reaction of active materials according to the potential change. Besides the difference in contact angle for ZnBr 2 electrolyte, there are differences in single cell test at 20 mA/cm 2 & 2 mAh/cm 2 and performance test at 20 mA/cm 2 & 24.3 mAh/cm 2 . These causes can be explained not only by the effect of the different slurry compositions, but also by the interaction of the active material with the coated carbon. Also, the redox reactions of bromine anion during charging process could be a clue for the battery capacity. Cathodic reactions for polybromide [Br 2 + Br n – → Br n+2 – , (n=1,3,5...)] can be analyzed by Raman spectroscopy. The peak shift and deconvolution of the Raman data can measure the progress of cathodic reactions. The boron dopants can stabilize the reversibility of faradaic reactions and induce high resistance to strong acid electrolytes (For ZnBr 2 electrolyte of 2.0 M or higher, it has a value under the pH 4). Figure 1

Self-Assembled Blossom-Shaped NiCo2S4 Nanosheets In Situ Deposited Electrodes: Possessing High Reactivity and Selectivity for Bromine-Based Flow Batteries

Self-Assembled Blossom-Shaped NiCo 2 S 4 Nanosheets In Situ Deposited Electrodes: Possessing High Reactivity and Selectivity for Bromine-Based Flow Batteries

Cobalt Nanoparticle-Encapsulated Carbon Nanowire Arrays: Enabling the Fast Redox Reaction Kinetics of Lithium-Sulfur Batteries

Core‐shell Ni/NiO heterostructures as catalytic cathodes enabling high‐performance zinc bromine flow batteries

Development of Bromine Adsorbing Carbon Felt Electrode by Coating of Nitrogen-Doped Mesoporous Carbon Layer for Highly Stable Flowless Zinc-Bromine Battery

Urchin-Like Mesoporous TiN Hollow Sphere Enabling Promoted Electrochemical Kinetics of Bromine-Based Flow Batteries

Bimetallic metal–organic framework: an efficient electrocatalyst for bromine-based flow batteries

Function Regionalized Catalyst Promoted Bromine Redox Kinetics for Bromine-Based Flow Battery

Efficient Nitrogen-Doped Carbon for Zinc-Bromine Flow Battery.

Effect of Heteroatoms Doped Nanoporous Carbon for Aqueous Zinc–Bromine Battery

In Situ Vertically Aligned MoS2 Arrays Electrodes for Complexing Agent‐Free Bromine‐Based Flow Batteries with High Power Density and Long Lifespan

Bifunctionally Electrocatalytic Bromine Redox Reaction by Single‐Atom Catalysts for High‐Performance Zinc Batteries

Multifunctional Carbon Felt Electrode with N‐Rich Defects Enables a Long‐Cycle Zinc‐Bromine Flow Battery with Ultrahigh Power Density

Achieving unprecedented cyclability of flowless zinc-bromine battery by nitrogen-doped mesoporous carbon on thick graphite felt electrode

Redox-targeting Catalyst Developing New Reaction Path for High-Power Zinc-Bromine Flow Batteries

Indium Nanoparticle‐Decorated Graphite Felt Electrodes for Efficient and Long‐Cycle Zinc‐Bromine Flow Batteries

Boosting aqueous non-flow zinc–bromine batteries with a two-dimensional metal–organic framework host: an adsorption-catalysis approach

High‐Energy Efficiency Membraneless Flowless Zn–Br Battery: Utilizing the Electrochemical–Chemical Growth of Polybromides

Regulated adsorption capability by Interface–Electric–Field enabling promoted electrochemical kinetics of Zinc–Bromine flow batteries

Recent developments in carbon‐based electrodes surface modification for zinc bromine flow battery

Low-dimensional Nitrogen-Doped Carbon for Br2/Br− Redox Reaction in Zinc-Bromine Flow Battery