Abstract:As interest in renewable energy increases, the importance of batteries that store surplus power is also increasing. However, frequent ignition issues with the lithium-ion secondary battery arose. One of the next-generation batteries, Zinc-Bromine based aqueous flow batteries, are being actively studied based on advantages of high safety and environmental benignity. However, there is an exorbitant price for flow battery due to the use of a membrane, an electrolyte tank, and a pump. In order to eliminate the shortcomings, this research introduced a form of membraneless and flowless systems. In this study, a nanoporous carbon material doped with nitrogen and boron heteroatoms was synthesized and coated on graphite felt. Differences in electrochemical performance were observed when carbon was coated with different slurry compositions (activated carbon: conductive carbon: binder), dopant amount of heteroatoms, and carbon loading mass. Cyclic voltammetry was performed with a three-electrode system to observe the faradaic reaction of active materials according to the potential change. Besides the difference in contact angle for ZnBr 2 electrolyte, there are differences in single cell test at 20 mA/cm 2 & 2 mAh/cm 2 and performance test at 20 mA/cm 2 & 24.3 mAh/cm 2 . These causes can be explained not only by the effect of the different slurry compositions, but also by the interaction of the active material with the coated carbon. Also, the redox reactions of bromine anion during charging process could be a clue for the battery capacity. Cathodic reactions for polybromide [Br 2 + Br n – → Br n+2 – , (n=1,3,5...)] can be analyzed by Raman spectroscopy. The peak shift and deconvolution of the Raman data can measure the progress of cathodic reactions. The boron dopants can stabilize the reversibility of faradaic reactions and induce high resistance to strong acid electrolytes (For ZnBr 2 electrolyte of 2.0 M or higher, it has a value under the pH 4). Figure 1

Recent developments in carbon‐based electrodes surface modification for zinc bromine flow battery

Recent Advances of Carbon Materials in Anodes for Aqueous Zinc Ion Batteries

Scientific issues of zinc-bromine flow batteries and mitigation strategies

Advanced Materials for Zinc‐Based Flow Battery: Development and Challenge

Carbon-assisted anodes and cathodes for zinc ion batteries: From basic science to specific applications, opportunities and challenges

Multidentate Chelating Ligands Enable High‐Performance Zinc‐Bromine Flow Batteries

Zinc-Bromine Batteries: Challenges, Prospective Solutions, and Future

Recent advances in zinc anodes for high-performance aqueous Zn-ion batteries

Development of Bromine Adsorbing Carbon Felt Electrode by Coating of Nitrogen-Doped Mesoporous Carbon Layer for Highly Stable Flowless Zinc-Bromine Battery

Challenges and Strategies for Constructing Highly Reversible Zinc Anodes in Aqueous Zinc‐Ion Batteries: Recent Progress and Future Perspectives

Electron‐Deficient Sites Constructed by Boron Doping Induce Homogenous Zn Deposition in Alkaline Zinc–Iron Flow Batteries

Progress in interface structure and modification of zinc anode for aqueous batteries

Aqueous Zn‐based rechargeable batteries: Recent progress and future perspectives

Carbon nanomaterials for highly stable Zn anode: Recent progress and future outlook

Recent Progress on High‐Performance Cathode Materials for Zinc‐Ion Batteries

Recent advances in emerging metal–organic and covalent–organic frameworks for zinc-ion batteries

Core‐shell Ni/NiO heterostructures as catalytic cathodes enabling high‐performance zinc bromine flow batteries

Review of the Research Status of Cost-Effective Zinc–Iron Redox Flow Batteries

Indium Nanoparticle‐Decorated Graphite Felt Electrodes for Efficient and Long‐Cycle Zinc‐Bromine Flow Batteries

Porous carbon-nanostructured electrocatalysts for zinc-air batteries: From materials design to applications

Effect of Heteroatoms Doped Nanoporous Carbon for Aqueous Zinc–Bromine Battery