Abstract:IEEE Control Systems Magazine 75 Nonlinear Model-Based Process Control, by Rashid M. Ansari and Moses O. Tadé, Springer, 2000, 232 pp., ISBN 185233213, $76.00. Reviewed by M. Ahmed. This book discusses the application of nonlinear model-based multivariable control and optimization to petroleum refining processes. The authors present an integrated approach to process analysis, control, and optimization wherein the same steady-state, nonlinear process model is used at each stage. This approach is superior to l inear model-based approaches because nonlinear models surpass linear models in capturing process nonlinearity, the use of one model eliminates problems arising from the use of multiple models, and the potential for optimizer-controller mismatch is reduced. The generic model control (GMC) law is the basis of this approach. In GMC, the control law directly embeds the process model and is based on present and historic output measurements. Control moves based on these measurements and the process model provide the necessary control action to achieve the predefined GMC reference trajectories of the outputs. The reference trajectories are defined based on the initial system outputs and set points. Slack variables defining the trajectory departure from the chosen specification curves are added to the GMC control law for both controlled and constraint variables. Slack variables ensure that a solution to the set of equations exists. The constrained multivariable control problem is solved as a nonlinear constrained optimization problem, which minimizes a function of slack variables. The control architecture consists of NMBC-Model for extracting models from process data; NMBC-Build for controller configuration, simulation, and tuning; NMBC-Connect for connecting the controller to the process; and NMBC-Display for the human-machine interface. Ansari and Tadé present challenging real-time control applications. A nonlinear controller was applied on a crude fractionator to control naptha end point, kerosene flash point, and bottom reflux temperature by manipulating top draw, side draw, and bottom reflux duty. Intermediate and upper reflux duties were disturbances. The results show that the performance of the nonlinear controller was superior to a linear controller for controlling the end points within constraints over a wide range of operating conditions. On a fluidized catalytic cracker reactor-regenerator, a nonlinear controller manipulates riser outlet temperature, feed flow, feed temperature, and combustion airflow to control flue gas O2 to a set point, and to maintain regenerator bed temperature within zone limits. The constraints are fuel gas flow and the outputs of the riser outlet temperature controller and wet gas compressor suction pressure controller. Feed composition is the disturbance. The control strategy translates operating constraints into set-point and zone limit objectives for the controlled variables. The nonlinear controller outperformed a linear controller in constraint handling, decoupling, and inverse response. The use of one model for control and optimization reduced the time required for plant tests. Inferential models predict naptha final boiling point and kerosene flash point in crude distillation, isopentane of debutanizer overhead, Reid vapor pressure of debutanizer bottom, and reformate octane in catalytic reforming. These models were developed using correlation-based techniques obtained from steady-state models of the process or plant operating experience. Results show that the prediction of these models was within the repeatability of lab results. In a closed loop for quality control, these models eliminate time delays associated with analyzers/lab results and improve control performance. On a catalytic reformer reactor, a nonlinear controller manipulates reactor inlet temperatures to control weighted average inlet temperature (WAIT) while meeting the constraints of heater tube temperatures and fuel gas valve positions. WAIT is set by an octane inferential model forming a closed-loop WAIT/octane control. In the absence of constraints, WAIT and the required temperature profile are met by a unique set of inlet temperatures. When constraints are activated, the target WAIT is the first priority and the temperature profile is relaxed to enforce constraint limits. The nonlinear controller did better than a linear controller in reducing octane deviation and handling disturbances in feed rate. The book includes a review of model-based control and optimization techniques and suggestions for future research. Embedded optimization is suggested as a potentially fruitful direction. This book is a concise and useful source for nonlinear control theory and applications in petroleum refining. The practical aspects have strong appeal for the practicing engineer.

Accessory medial pterygoid muscle.

Towards a Sustainable Ocean Ecosystem: Innovations in Plastic Pollution Mitigation, Policy Collaborations, and Technological Advancements

Impacts of Plastic Pollution on Ecosystem Services, Sustainable Development Goals, and Need to Focus on Circular Economy and Policy Interventions

Sustainable Implementation of Citizen-Based Plastic Monitoring of Fresh Waters in Western Africa

Früherkennung von Lungenkrebs

Progressive cerebral degenerations of childhood

Governance Strategies for Mitigating Microplastic Pollution in the Marine Environment: A Review

Self-learning control of finite markov chains [Book Review]

Microplastics pollution in the marine environment: A review of sources, impacts and mitigation

Microplastics in Aquatic and Food Ecosystems: Remediation Coupled with Circular Economy Solutions to Create Resource from Waste

Microplastics as an Emerging Threat to the Global Environment and Human Health

A catchment‐scale perspective of plastic pollution

The sampling and analysis of coastal microplastic and mesoplastic: Development of a citizen science approach

[Renal risk in urinary infections: pyelonephritis].

Mother-Calf Transfer of Organochlorine Compounds in the Common Dolphin (Delphinus delphis)

Understanding microplastic pollution: Tracing the footprints and eco-friendly solutions

Assessing Recent Technologies for Addressing Microplastic Pollution and Pushing the Case of Bioremediation as an Attractive Approach

Plastic Pollution and its Impact on Environment

Solutions and Integrated Strategies for the Control and Mitigation of Plastic and Microplastic Pollution

Mitigating microplastic pollution: A critical review on the effects, remediation, and utilization strategies of microplastics

Analysis of Pfmdr 1 gene in mefloquine-resistant Plasmodium falciparum.