Abstract:A large amount of Cr (VI)-polluted wastewater produced in electroplating, dyeing and tanning industries seriously threatens water ecological security and human health. Due to the lack of high-performance electrodes and the coulomb repulsion between hexavalent chromium anion and cathode, the traditional DC-mediated electrochemical remediation technology possesses low Cr (VI) removal efficiency. Herein, by modifying commercial carbon felt (O-CF) with amidoxime groups, amidoxime-functionalized carbon felt electrodes (Ami-CF) with high adsorption affinity for Cr (VI) were prepared. Based on Ami-CF, an electrochemical flow-through system powered by asymmetric AC was constructed. The mechanism and influencing factors of efficient removal of Cr (VI) contaminated wastewater by an asymmetric AC electrochemical method coupling Ami-CF were studied. Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) characterization results showed that Ami-CF was successfully and uniformly loaded with amidoxime functional groups, and the adsorption capacity of Cr (VI) was more than 100 times higher than that of O-CF. In particular, the Coulomb repulsion effect and the side reaction of electrolytic water splitting were inhibited by the high-frequency anode and cathode switching (asymmetric AC), the mass transfer rate of Cr (VI) from electrode solution was increased, the reduction efficiency of Cr (VI) to Cr (III) was significantly promoted and a highly efficient removal of Cr (VI) was achieved. Under optimal operating conditions (positive bias 1 V, negative bias 2.5 V, duty ratio 20%, frequency 400 Hz, solution pH = 2), the asymmetric AC electrochemistry based on Ami-CF can achieve fast (30 s) and efficient removal (>99.11%) for 0.5–100 mg·L−1 Cr (VI) with a high flux of 300 L h−1 m−2. At the same time, the durability test verified the sustainability of the AC electrochemical method. For Cr (VI)-polluted wastewater with an initial concentration of 50 mg·L−1, the effluent concentration could still reach drinking water grade (<0.05 mg·L−1) after 10 cycling experiments. This study provides an innovative approach for the rapid, green and efficient removal of Cr (VI) containing wastewater at low and medium concentrations.

Electricity generation from salinity gradient to remove chromium using reverse electrodialysis coupled with electrocoagulation

Remediation of Chromium-Slag Leakage with Electricity Cogeneration Via a Urea-Cr(vi) Cell

ELECTROCHEMICAL TREATMENT OF RECIRCULATING AQUACULTURE WASTEWATER USING A Ti/RuO2-IrO2 ANODE FOR SYNERGETIC TOTAL AMMONIA NITROGEN AND NITRITE REMOVAL AND DISINFECTION

Separation and Recovery of Cr(Iii) and Cr(Vi) Using Electrodeionization As an Efficient Approach

Asymmetric Alternative Current Electrochemical Method Coupled with Amidoxime-Functionalized Carbon Felt Electrode for Fast and Efficient Removal of Hexavalent Chromium from Wastewater

Hydrogen and electricity cogeneration driven by the salinity gradient from actual brine and river water using reverse electrodialysis

Redox-neutral electrochemical decontamination of hypersaline wastewater with high technology readiness level

Removal of Chromium(Vi) from Wastewater by Combined Electrocoagulation-Electroflotation Without A Filter

Deep utilization of salinity gradient energy between concentrated seawater and river water by multi-stage reverse electrodialysis

Electrochemical Oxidation of Ammonia Accompanied with Electricity Generation Based on Reverse Electrodialysis

Desalination combined with hexavalent chromium reduction in a microbial desalination cell

Recovering chromium from electroplating sludge using an integrated technology of bipolar membrane electrodialysis and H2O2 oxidation

Removal of Cr(VI) from Wastewater by Simplified Electrodeionization

Combination of Electroreduction with Biosorption for Enhancement for Removal of Hexavalent Chromium

Electrically Regenerated Ion Exchange For Removal And Recovery Of Cr(Vi) From Wastewater

Enhanced electrochemical disinfection of domestic aquaculture wastewater with energy production in reverse electrodialysis

External electricity-powered FeS/graphene/bacterial hybrid for Cr 6+ removal from water lacking organic electron donors

Response of salinity gradient power generation to inflow mode and temperature difference by reverse electrodialysis

A sodium hyposulfite fuel cell for efficient Cr(VI) removal

Power production from seawater and discharge brine of thermal desalination units by reverse electrodialysis

Selective Removal of Chromium and Chloride by Flow Electrode Capacitive Deionization (FCDI) with Carrier-Facilitated Ion Exchange Membrane