Abstract:Sodium-ion batteries (SIBs) have emerged as a promising alternative to lithium-ion batteries (LIBs) due to the abundance and low cost of sodium resources. Cathode material plays a crucial role in the performance of sodium ion batteries determining the capacity, cycling stability, and rate capability. Na3V2(PO4)3 (NVP) is a promising cathode material due to its stable three-dimensional NASICON structure, but its discharge capacity is low and its decay is serious with the increase of cycle period. We focused on modifying NVP cathode material by coating carbon and doping Nb5+ ions for synergistic electrochemical properties of carbon-coated NVP@C as a cathode material. X-ray diffraction analysis was performed to confirm the phase purity and crystal structure of the Nb5+ doped NVP material, which exhibited characteristic diffraction peaks that matched well with the NASICON structure. Nb5+-doped NVP@C@Nbx materials were prepared using the sol–gel method and characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Raman and Brunauer -Emmett-Teller (BET) analysis. First-principles calculations were performed based on density functional theory. VASP and PAW methods were chosen for these calculations. GGA in the PBE framework served as the exchange-correlation functional. The results showed the NVP unit cell consisted of six NVP structural motifs, each containing octahedral VO6 and tetrahedral PO4 groups to form a polyanionomer [V2(PO4)3] along with the c-axis direction by PO4 groups, which had Na1(6b) and Na2(18e) sites. And PDOS revealed that after Nb doping, the d orbitals of the Nb atoms also contributed electrons that were concentrated near the Fermi surface. Additionally, the decrease in the effective mass after Nb doping indicated that the electrons could move more freely through the material, implying an enhancement of the electron mobility. The electrochemical properties of the Nb5+ doped NVP@C@Nb cathode material were evaluated through cyclic voltammetry (CV), galvanostatic charge-discharge tests, electrochemical impedance spectroscopy (EIS), and X-ray photoelectric spectroscopy (XPS). The results showed that NVP@C@Nb0.15 achieved an initial discharge capacity as high as 114.27 mAhg−1, with a discharge capacity of 106.38 mAhg−1 maintained after 500 cycles at 0.5C, and the retention rate of the NVP@C@Nb0.15 composite reached an impressive 90.22%. NVP@C@Nb0.15 exhibited low resistance and high capacity, enabling it to create more vacancies and modulate crystal structure, ultimately enhancing the electrochemical properties of NVP. The outstanding performance can be attributed to the Nb5+-doped carbon layer, which not only improves electronic conductivity but also shortens the diffusion length of Na+ ions and electrons, as well as reduces volume changes in electrode materials. These preliminary results suggested that the as-obtained NVP@C@Nb0.15 composite was a promising novel cathode electrode material for efficient sodium energy storage.

Pr6O11 modification effectively enhancing sodium storage for Na3V2(PO4)3 batteries

Modification of the morphology of Na3V2(PO4)2F3 as cathode material for sodium-ion batteries by polyvinylpyrrolidone

Synergistically Boosting Sodium-Storage Performance of Na3V2(PO4)3 by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks

Simultaneous Modification of Dual-Substitution with CeO2 Coating Boosting High Performance Sodium Ion Batteries

Synergistically Boosting Sodium-Storage Performance of Na 3 V 2 (PO 4 ) 3 by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks

Boosting sodium-ion battery performance with binary metal-doped Na3V2(PO4)2F3 cathodes

Accelerating the electrochemical kinetics of Na3V2(PO4)3 cathode for high-performance sodium ion batteries with superior cycling stability by Cl− substitution

Optimizing Vanadium Redox Reaction in Na3V2(PO4)3 Cathodes for Sodium-Ion Batteries by the Synergistic Effect of Additional Electrons from Heteroatoms

N-doped dual carbon-layer-modified Na3V2(PO4)3 as a high-performance cathode material for sodium-ion batteries

Toward high-performance sodium storage cathode: Construction and purification of carbon-coated Na3V2(PO4)2F3 materials

Mnx+ Substitution to Improve Na3V2(PO4)2F3-Based Electrodes for Sodium-Ion Battery Cathode

Na3V2(PO4)3 Cathode Materials for Advanced Sodium-Ion Batteries: Modification Strategies and Density Functional Theory Calculations

Partial Modification Strategies of NASICON-Type Na 3 V 2 (PO 4 ) 3 Materials for Cathodes of Sodium-Ion Batteries: Progress and Perspectives

Improved Electrode Kinetics of Modified Na3V2(PO4)3 Cathode through Zr Substitution and Nitrogen-Doped Carbon Coating towards Robust Electrochemical Performance at Low Temperature

Double carbon modified Na<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub> with dual charge carriers and high performance synthesized in-situ in polypyrrole and chitosan quaternary ammonium hydrogel

Preparation of Nb5+ Doped Na3V2(PO4)3 Cathode Material for Sodium Ion Batteries

Construction of simultaneous modified Na<sub>3</sub>V2(PO<sub>4</sub>)<sub>3</sub>/C cathode with K/Zr substitution and carbon nanotubes enwrapping for high performance sodium ion battery

One-step Multiple Structure Modulations on Sodium Vanadyl Phosphate@carbon Towards Ultra-Stable High Rate Sodium Storage

Surface Modification of Na3v2(Po4)(3) by Nitrogen and Sulfur Dual-Doped Carbon Layer with Advanced Sodium Storage Property

Enhanced performance of Sn-doped Na3V2(PO4)3 with CNT integration for high-efficiency sodium-ion batteries

Boosting the rate capability and cycle life of Zr-substituted Na3V2(PO4)3/C enwrapped on carbon nanotubes for symmetric Na-ion batteries