Abstract:Since the papyri, cellulose has played a significant role in human culture, especially as paper. Nowadays, this ancient product has found new applications in the expanding sector of bioactive paper. Simple paper-based detection devices such as lateral flow immunoassays (LFIAs) are inexpensive, rapid, userfriendly and therefore highly promising for providing resource-limited settings with point-of-care diagnostics. Recently, paper-based biosensing technology has trended towards three-dimensional microfluidic devices and multiplexed assay platforms. Yet, many multiplexed paper-based biosensors implement methods incompatible with the conventional LFIA carrier material: nitrocellulose. It thus tends to be replaced by pure cellulose. This major material change implies to undertake a covalent immobilization of biomolecules on cellulose which preserves their biological activity. Furthermore, the current global issues have stimulated the search for both ecologically and economically friendly (eco²-friendly) materials and processes. As a sustainable and affordable biopolymer, cellulose is an ideal material for developing diagnostic devices. However, the frame material is not the only aspect to consider. The whole device design and production, as well as the biosensing material immobilization or the non-sensing membranes treatment, should be as eco²-friendly as possible. Hence, the spatially controlled modification of cellulose surface seems crucial in the development of such devices since it enables to save expensive matter and to pattern surface properties. In any case, modification procedures should abide by the economic and ecological objectives aforementioned. In this perspective, three processes allowing easy, robust and sustainable modification of cellulose sheets were developed. All are environmentally friendly, simple, time and cost-saving, and versatile. The first procedure is a functionalization of cellulose membranes for covalent antibody immobilization. While cellulose chemical modification is usually operated under harsh conditions in organic solvents, the diazonium-based procedure developed was performed in water, at room temperature, in a single step. Paper sheets have thus been modified and bear different chemical functions which enable to graft biomolecules by common bioconjugate techniques and to perform LFIAs. The second is a chemical-free photoimmobilization procedure which allowed antibodies to be immobilized on cellulose without any photocoupling intermediate nor any biomolecule or substrate pretreatment. This immobilization technique was further combined to inkjet printing to localize the antibodies according to any pattern desired. Native antibodies have thus been printed and immobilized on paper sheets which therefore enable to perform LFIAs. Membranes’ performances were evaluated in terms of visual detection limit and challenged nitrocellulose performances. The third is a modification of cellulose membranes by polymer grafting. Unlike the two previous processes, this technique was developed in order to increase the functionality of the non-sensing cellulose parts of paper-based devices. Yet, it may be employed as another functionalization method for covalent antibody immobilization on cellulose. While cellulose graft copolymerization is usually performed through complex and expensive procedures, the diazonium-based approach employed was performed in water, at room temperature, in a short single step. Cellulose sheets have thus been grafted with several acrylic polymers, first globally through a dipping procedure and then locally by inkjet printing. All the strategies developed herein would be helpful to immobilize sensitive proteins on selected specific areas of cellulose sheets. More generally, these are powerful tools for easy and rapid modulation of cellulose surface properties according to complex designs, under soft and biocompatible conditions.

Surface modification of paper-based microfluidic devices via initiated chemical vapor deposition

Initiated Chemical Vapor Deposition: A Versatile Tool for Various Device Applications

Fabrication of paper-based microfluidic devices by octadecyltrichlorosilane self-assembling and uv-patterning

Method for fabrication of paper-based microfluidic devices by alkylsilane self-assembling and UV/O3-patterning.

3D Printed Paper-Based Microfluidic Analytical Devices

Fabrication of Paper-Based Microfluidics by Spray on Printed Paper

From Microfluidic Paper-Based Analytical Devices to Paper-Based Biofluidics with Integrated Continuous Perfusion.

Polymer Thin Films and Surface Modification by Chemical Vapor Deposition: Recent Progress.

Paper-based microfluidic devices: Fabrication, detection, and significant applications in various fields

Flexible membranes fabricated by initiated chemical vapor deposition for water treatment, battery, and drug delivery

Surface molecular property modifications for poly(dimethylsiloxane) (PDMS) based microfluidic devices

Fabrication of paper-based microfluidic analysis devices: a review

Biofunctional paper via the covalent modification of cellulose

Rapid Fabrication of Paper-Based Microfluidic Analytical Devices with Desktop Stereolithography 3d Printer

Facile Microembossing Process for Microchannel Fabrication for Nanocellulose-Paper-Based Microfluidics

Exploration of Plasma-Enhanced Chemical Vapor Deposition as a Method for Thin-Film Fabrication with Biological Applications

Surface Modification of Natural Cellulose Substances: Toward Functional Materials and Applications

Paper based microfluidic devices: a review of fabrication techniques and applications

Recent developments in PDMS surface modification for microfluidic devices

Laser-etched grooves for rapid fluid delivery for a paper-based chemiresistive biosensor

Simple, biocompatible and robust modification of cellulose membranes for the eco²-friendly preparation of immunoassay devices