Abstract:Statement of problem: The accuracy of digital waxing-guided trial restoration protocols that have been implemented with ceramic veneers has not been reported. Purpose: The purpose of this in vitro study was to evaluate the accuracy of 3 digital trial restorations fabricated from digital waxing for ceramic veneers. Material and methods: A uniform 0.3-mm digital waxing added to the facial surface of 30 maxillary central typodont incisors was created in a software program. The trial restorations were fabricated on typodont teeth with autopolymerizing acrylic resin by using a silicone index based on 3-dimensionally printed casts designed from the digital waxing. The 30 maxillary central incisors were divided into 3 groups: the depth cutter (0.5 mm, Komet) (DC) group, the round bur (1.5 mm, Diatech) (RB) group, and the specially designed calibrated depth bur (laser mark of 0.5 mm, Gaofeng) (CD) group. The 3 groups were randomly prepared with a random number table by 2 experienced prosthodontists aiming to produce an even facial clearance of 0.5 mm. The dimensional differences in the standard tessellation language (STL) files between the surfaces of the original teeth, digital waxing, trial restorations, and prepared teeth in the software program were measured and analyzed at the same 9 points on the labial surface. One-way ANOVA with a post hoc test was used to identify significant discrepancies between trial restorations and waxing and differences in the reduction depth of typodont teeth (RDT) and the reduction depth (RD) among the 3 techniques (α=.05). The mean relative differences (MRDs) were calculated to determine the accuracy (%). Results: The thickness of the trial restorations was significantly greater than that of the digital waxings, with a discrepancy of 0.20 ±0.14 mm, especially at the cervical site. With the use of a trial restoration, the RDTs of the middle (-0.01 ±0.11 mm) and cervical locations (0.09 ±0.20 mm) showed significantly smaller preparation depths than did the other locations. Significant differences in RD were found among the 3 guided techniques (P<.05). Group DC presented the most accurate result of 0.51 ±0.08 mm with an MRD of 2%, whereas the results of 0.57 ±0.10 mm with an MRD of 14% and 0.60 ±0.11 mm with an MRD of 20% were obtained from group RB and group DC, respectively. Conclusions: The trial restoration was significantly thicker than its corresponding waxing. The DC technique presented the most accurate reduction result among the 3 protocols examined.

Effects of stamp material and restoration depth on the accuracy of direct composite resin restorations using stamp technique

[Morphology accuracy evaluation of direct composite occlusal veneer using two types of modified stamp-technique]

Evaluation of direct restorations for pit-and-fissure caries using stamp combined with single-shade composite resin technique: A 12-month follow-up in vivo study

3D Digital Evaluation for Direct Composite Restoration Using the Modified Stamp Technique

[The stamp technique for direct composite restoration]

[Micro-CT observations of the adaptation at gingival wall in Class II restorations with different dental restorative materials]

Effects of the lining material, thickness and coverage on residual stress of class II molar restorations by multilayer technique

Accuracy of three digital waxing-guided trial restoration protocols for controlling the depths of tooth preparation for ceramic veneers

Elevating Restorative Dentistry: Use of the Art of Stamp Techniques in Mandibular Posterior Regions

Dimensional Accuracy of Novel Vinyl Polysiloxane Compared with Polyether Impression Materials: An In Vitro Study

Effortless Precision: A Case Report on the Stamp Technique for Posterior Teeth

The influence of finishing line and luting material selection on the seating accuracy of CAD/CAM indirect composite restorations

Effect of Different Impression Techniques on Marginal Fit of Restoration – An In Vitro Study

Effect of Abutment Tooth Geometry On The Accuracy of Fixed Prosthodontics Casts Obtained by Digital and Analog Workflows—In Vitro Study

Effect of Luting Materials on the Accuracy of Fit of Zirconia Copings: A Non-Destructive Digital Analysis Method

The Accuracy of Post and Core Fabricated with Digital Technology

[In vitro analysis of the influence of different tooth positions and retention depths of the pulp cavity on the accuracy of digital impression of the endocrown]

Direct ink writing with dental composites: A paradigm shift toward sustainable chair-side production

3D Evaluation of Accuracy of Tooth Preparation for Laminate Veneers Assisted by Rigid Constraint Guides Printed by Selective Laser Melting.

Incremental Filling Technique and Composite Material—Part I: Cuspal Deformation, Bond Strength, and Physical Properties

Accuracy, fit, and marginal quality of advanced additively manufactured and milled zirconia 3-unit fixed dental prostheses